NUUO BL3102 User manual

0

BL3102

2MP Mini Bullet Camera

Quick Installation Guide

1

Quick Installation Guide

Please follow the installation steps below to set up your 2MP Mini Bullet Camera.

Check the package contents against the list below. See P. 1

Physical overview. See P. 2

Install the hardware and connect all cables. See P. 2

Microsoft OS: Use the software CD to install Camera Installation Tool.See P. 3

Access the IP Camera using Camera Installation Tool.See P. 4

Mac OS using Safari Broswer. See P. 6

Lighting environment setting.See P. 6

Change the Web Interface into your preferred language. See P. 7

Application of IP Camera. See P. 7

Package Contents

Software

The following software and information are available online:

-Camera Bundle Software

-Camera Installation Tool

-User manuals

Please go download fromhttp://www.champsolution.com/DownloadMainpage.php

Camera 2MP Mini Bullet Camera

Quick Installation Guide Brief product information and quick installation

Accessory Screws and anchors for wall and ceiling mounting

RJ45 waterproof connector

2

Physical Overview

Reset: When the device is powered, press the Reset Button to reboot the device, or hold the Reset

Button for 15 seconds to the settings back to factory default.

Install the hardware and connect all cables

a. Wall mounting and Ceiling mounting

1. Use the 3 supplied screws to fix the base plate to a flat surface.

2. Loosen the screws on the bracket to aim the shooting area.

3. Tighten the screws at the joints of the bracket.

b. Connet all cables

c. RJ45 waterproof connector

b1. Without Power over Ethernet (PoE) connection

1. Connect the 12V power adaptor to the IP Camera.

2. Using a standard RJ-45 network cable, connect the

IP Camera to a normal Hub/ Switch/ Router.

b2. Power over Ethernet (PoE)

Using a standard RJ-45 network cable,

connect the IP Camera to a PoE-enabled

Hub/ Switch/ Router.

3

1. Cut the RJ45 crystal head of network cable.

2. Feed the network cable through the fastening nut, waterproof rubber ring, and main body.

3. Re-connect the RJ45 crystal head with network cable and insert it into ethernet port and fasten

main body clockwisely

Note : IP Camera watertight ambit

2MP mini bullet IP camera uses IP-66 rated weatherproof housing. The image as below shows you

the ambit of watertight and non-watertight, please make sure the cable with plug on the right side

of cable molding should be avoided from water.

Microsoft OS: Use the software CD to install Camera Installation Tool

Please go http://www.champsolution.com/DownloadMainpage.php download

“Camera Installation Tool”. Andfollow the installation process to complete the

installation.

Watertight Non-watertight

Cable molding

4

Access the IP Camera using Camera Installation Tool

1. Please check two settings before using Camera Installation Tool.

a. Browser’s Internet Properties Security 

Default Level

b. Browser’s Internet Properties Privacy

Uncheck Pop-up Blocker

2. Click the Intelligent IP Installer Icon on your desktop. The main page will show up listing all

active camera and video server devices. Select the relevant IP camera from the list and click

Link to IE.

3. Enter your Username and Password to

login to the IP Camera.

(Default is admin / admin)

5

4. When accessing the IP Camera for the first time, a yellow information bar appears below the

address bar: This website wants to install the following add-on: ‘AxvideoView.cab’.

5. Click the information bar, and select Install ActiveX control.

6. Click Install.

7. Live video displays in the centre of your web browser.

6

Mac OS using Safari Browser

Lighting environment setting

The default setting of lighting environment is Auto. However, you may also select 50 or 60 Hz upon

the lighting environment of your country.

Go to “Setting > Live View > Camera Setting > Image Setting”, select the environment setting you w

ish.

1. Select Safari icon

2.

Click

Bonjour

function

and

select

the

camera you wish to access.

3. Enter name and password to login to the

IP camera. (Default is admin / admin)

4. The monitor image will be displayed in

your browser.

7

Change the Web Interface into your preferred language

Use the settings screen to set the language of the Web Interface.

Go to “Setting > System > Maintenance ”.

1. Go website http://www.champsolution.com/DownloadMainpage.php download

language pack.

2. Browse and select the preferred language and then click OK.

3. The web interface will change into your preferred language.

8

Memo

…………………………………………………………………………………………………………………………………………………..

9

Memo

…………………………………………………………………………………………………………………………………………………..

NUUO BL3102 User manual

Popular Security Camera manuals by other brands