Download and install the
Android/iOS NUVIZ App
on your phone or tablet
Enter a Username/Password
to create your NUVIZ account
and then sign in
Follow the on-screen prompts
on your phone or tablet to pair
your NUVIZ devices
3.1 3.2 3.3
NUVIZ APP INSTALLATION AND SETUP
Open the battery cover of the
Controller with the tool provided
Insert the battery (CR2032)
with the ‚“+” sign facing up as
indicated on the Controller
Press any key to power on
and activate the Controller
Pairing starts automatically
and status is indicated
on the display
2.1 2.2 2.3 2.4
CONTROLLER SETUP
Wear your helmet to ensure
proper positioning of NUVIZ
Use a mirror to place NUVIZ on
your helmet
Adjust the multi-directional
viewing angle
Find the best position and peel
off 1/3 of the backing from
the mount base sticker
Align the center of the NUVIZ
display with your right eye for
optimal position
Gently press NUVIZ into
position and then reverify
placement
Hold NUVIZ in place and press
a minimum of 3 minutes
Remove the remaining backing
4.1
4.5
4.2
4.6
4.3
4.7
4.4
4.8
HELMET INSTALLATION
visible on the NUVIZ display
Press the camera key on
the Controller to activate
Press the top function key toPress the plastic lens collar to
adjust the view as desired
8.1 8.2 8.3 8.4
CAMERA ADJUSTMENT
Install the headset speakers
and microphone inside
your helmet
With NUVIZ detached plug
the cable into the headset jack
on the mount
Test and adjust the position
of your headset as necessary
6.1 6.2 6.3
HEADSET INSTALLATION
Activate the release button
below NUVIZ to release
Slide NUVIZ upwards from
the mount to remove it
from your helmet
Continue sliding NUVIZ
upwards until fully detached
from the mount
Slide in the cover to protect the
mount when NUVIZ is not in use
5.1 5.2 5.3 5.4
NUVIZ DETACHMENT
The Controller can also be
attached to a flat surface
with just the adhesive pad
Mount M2 can be used in other
locations. If needed, bend
petals before attaching
the sticker
Note the lock/unlock symbols
when attaching or removing
the Controller
7.67.5 7.7
Select one of multiple
locations that the controller
can be installed
Position your Controller
allowing for easy access
with your left hand
Verify the orientation of the
Controller prior to attachment
to your motorcycle
Mount M1 can be used to
attach NUVIZ Controller
to a handlebar
8mm
5/16´´
7.1 7.2 7.3 7.4
CONTROLLER INSTALLATION
1.1 1.2 1.3 1.4
Press and hold power button
for 2-3 seconds to turn on
NUVIZ
Open the battery cover of
NUVIZ with the tool provided
Insert the battery and a
microSD card used for video
capture (sold separately)
Display will light up upon
successful power up
NUVIZ SETUP
Copyright © 2017 NUVIZ, Inc. All rights reserved. The information provided in this document is intended for informational purposes only and is subject to change without notice. NUVIZ reserves the right to change or improve its products and to make changes
in the documentation without notifying any person or organization of such changes or improvements. Visit the NUVIZ website for updates and supplemental information concerning the use and operation of NUVIZ products.
1
2
3 7
6
5
8
4
NOTICE: Apply NUVIZ to a clean helmet surface at room temperature. Attach the adhesive mount at least 24 hours before use The NUVIZ User Guide is available online www.rideNUVIZ.com/support
NOTICE: Detach NUVIZ and let the adhesive mount cure at least 24 hours before use
