nvent SCHROFF 60118583 User manual

nVent.com/SCHROFF |1
1U Ultra short depth LCD Console Drawer
Ultra short depth
400mm / 15.7″
Options :
- SDI
- HDMI
- DC power
Item Number 60118-599
INSTALLATION AND MAINTENANCE GUIDE
User Manual

2 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Legal Information
First English printing, March 2019
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
• Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
• Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environ-
ment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
• When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
• When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
• Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
• If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and
current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher
than the one listed on the equipment’s ratings label.
• Observe all precautions and warnings attached to the equipment.
• If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
• Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, re or electrical shock.
• Only qualied service personnel should open the chassis. Opening it yourself could damage the equipment
and invalidate its warranty.
• If any part of the equipment becomes damaged or stops functioning, have it checked by qualied service
personnel.
What the warranty does not cover
• Any product, on which the serial number has been defaced, modied or removed.
• Damage, deterioration or malfunction resulting from:
• Accident, misuse, neglect, re, water, lightning, or other acts of nature, unauthorized product
modication, or failure to follow instructions supplied with the product.
• Repair or attempted repair by anyone not authorized by us.
• Any damage of the product due to shipment.
• Removal or installation of the product.
• Causes external to the product, such as electric power uctuation or failure.
• Use of supplies or parts not meeting our specications.
• Normal wear and tear.
• Any other causes which does not relate to a product defect.
• Removal, installation, and set-up service charges.

INSTALLATION AND MAINTENANCE GUIDE
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
Any changes or modications made to this equipment may void the user’s authority to operate
this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Re-position or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.

4 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Contents
Legal Information ......................................................................................................................2
Safety Instructions ....................................................................................................................2
What the warranty does not cover.........................................................................................2
Regulatory Notices Federal Communications Commission (FCC).................................3
Before Installation .....................................................................................................................5
Unpacking ...................................................................................................................................5
How To Clean Your LCD Monitor............................................................................................5
Cleaning Your Monitor..............................................................................................................5
Cleaning Tough Marks and Smudges ...................................................................................5
Package Content .......................................................................................................................6
Structure Diagram .....................................................................................................................6
Dimension...................................................................................................................................7
Installation - Installation Slides...............................................................................................8
Installation - How to use the drawer......................................................................................9
Connection to USB Server via CX-6cable.............................................................................10
Connection to external KVM via CX-6cable....................................................................10
Connection to USB Server via CB-6cable.............................................................................11
Connection to external KVM via CB-6cable........................................................................11
Product Specifications .............................................................................................................12
Standard Keyboard / Mouse Specifications ......................................................................14
MAC Keyboard/Mouse Options..............................................................................................15
Supporting layouts ....................................................................................................................15
Keyboard Features ....................................................................................................................15
SUN Keyboard/Mouse Options...............................................................................................16
How to Use "S" Keyboard.........................................................................................................16
On-screen Display Operation (OSD).......................................................................................17
On-screen Display Operation (OSD).......................................................................................18
Options: .......................................................................................................................................19
Options: DC Power ....................................................................................................................20
Options: ORB-2.1- 2-Post Rack Mounting Brackets21
Notes............................................................................................................................................22

nVent.com/SCHROFF |5
INSTALLATION AND MAINTENANCE GUIDE
Before Installation
• It is very important to mount the equipment in a suitable cabinet or on a stable surface.
• Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust,
dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1. Disconnect the power cord.
2. Gently wipe the surface using a clean, dry microber cloth. Use as little pressure as possible.
How To Clean Your LCD Monitor
Caution :
• To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor
from or plugging your monitor into an electrical outlet.
• When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen
can scratch or damage your display. Pressure damage is not covered under warranty.
• Use only cleansers made specically for cleaning monitors and monitor screens. Cleansers not
made to clean monitors and monitor screens can scratch the LCD display or strip off the nish.
• Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids
directly onto the screen or case can cause damage which is not covered under warranty.
• Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1. Disconnect the power cord.
2. Spray a small amount of non-abrasive cleanser on a microber cloth.
3. Gently wipe the surface. Use as little pressure as possible.
4. Wait until your monitor is completely dry before plugging it in and powering it up.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to


6 |nVent.com/SCHROFF
INSTALLATION AND MAINTENANCE GUIDE
Package Content
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI, Touchscreen & DC power.
Structure Diagram
4
3
1LCD interchangeable module kit
Installation Slides
Molded front handle
Audio speaker ( for SDI or HDMI option )
2
8
7
6
5LCD membrane
Micro switch for screen auto power o󰀨
Keyboard interchangeable module kit
Mouse interchangeable module kit
- CX-6 6ft DVI-D console cable X 1
( Alternative : CB-6 6ft VGA console cable )
- 2.5A Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 8
6
4
5
8
2
1
3
7

nVent.com/SCHROFF |7
INSTALLATION AND MAINTENANCE GUIDE
Side View
Top View
Front View
The weight is only for the single console models. It varies with accessories & options

UNIT : mm
1mm = 0.03937 inch
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
60118583
60118584
60118585
441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73"
590 x 622 x 140 mm
23.2 x 24.5 x 5.5"
8.6 kg
18.9 lb
13.6 kg
29.9 lb
Rear View
PowerVGADVI-D
Dimension

INSTALLATION AND MAINTENANCE GUIDE
Installation - Installation Slides
• Fix the LCD console drawer into the rack.
Complete the installation
Step 3
• Insert the left and right rear mounting brackets
into the LCD console drawer.
Step 1
Step 2
• Measure the depth of the front and rear
mounting rails.
• Align each rear mounting bracket to a
suitable length.

are provided.

INSTALLATION AND MAINTENANCE GUIDE
Installation - How to use the drawer
• Operate the LCD console drawer.
• Flip up the LCD to a suitable angle.
• Press the handle button and gently
slide out the drawer.

INSTALLATION AND MAINTENANCE GUIDE
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the
servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and
KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer. Be-
fore attempting to connect anything to the LCD console drawer, we suggest turning off the power to all
devices. Apply power to connected devices again only after the LCD console drawer is receiving power.
The company is not responsible for damage caused in this way.
Connection to USB Server via CX-
DVI-D
LCD Console Drawer
USB server
KVM
CX-6 DVI-D

Power
DVI-DUSB
*Monitor keyboard screen in external power
Connection to external KVM via CX-
DVI-D
DVI console KVM
LCD Console Drawer
Power
CX-6 DVI-D

DVI-D USB
KVM
*Monitor keyboard screen in external power

INSTALLATION AND MAINTENANCE GUIDE
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as
the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers
and KVM are powered on may cause irreversible damage to the servers, KVM and LCD console drawer.
Before attempting to connect anything to the LCD console drawer, we suggest turning off the power to all
devices. Apply power to connected devices again only after the LCD console drawer is receiving power.
The company is not responsible for damage caused in this way.
LCD Console Drawer
DVI-D
KVM
USB server
CB-6 VGA

VGAUSB
Connection to USB Server via CB-
*Monitor keyboard screen in external power
DVI-D
KVM
LCD Console Drawer
USB console KVM
USB VGA
CB-6 VGA

Connection to external KVM via CB-
*Monitor keyboard screen in external power

INSTALLATION AND MAINTENANCE GUIDE
Compliance EMC FCC & CE certied
Safety CE / LVD certied
Environment RoHS2 & REACH compliant
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption for Single Con-
sole
Screen ON Max. 25W
Power saving mode Max. 4W
Power button OFF Max. 1W
Power Consumption
with KVM integration
Screen ON Max. 55W
Power saving mode Max. 34W
*For details, please refer to our KVM rear kit user manuals
Product Specifications
LCD
Panel 60118583, 60118584, 60118585
Native Resolution 1920 x 1080
Panel Size ( diagonal ) 17.3"
Brightness ( cd/m² ) 400
Contrast Ratio ( typ. ) 600:1
Colors 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 80/80/60/80
Response Time ( ms ) 5.5
Dot pitch ( mm ) 0.1989
Display Area ( mm ) 381.888H x 214.812V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
Video Digital HDMI HDMI 1.4 / HDCP 1.4
DVI-D DVI-D, TMDS single link
Analog VGA Analog 0.7Vp-p
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG

INSTALLATION AND MAINTENANCE GUIDE

Format
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
Audio Signal 2ch Linear PCM
HDMI Input PC Signal Same as VGA
HDMI 1.4 1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
*In some circumstances, if the user connects the LCD to PC via HDMI port
or video and audio signals, the LCD may dsplay incorectly on a full screen.
If so, please adjust the display card setting on display size to x the issue.
Physical

60118583, 60118584, 60118585
Product ( W x D x H ) 441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73 inch
Packing ( W x D x H ) 590 x 622 x 140 mm
23.2 x 24.5 x 5.5 inch
Net Weight 8.6 kg / 18.9 lb
Gross Weight 13.6 kg / 29.9 lb
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random

INSTALLATION AND MAINTENANCE GUIDE
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS


Gb
Supporting layouts
America
United States
EMEA
United Kingdom Germany France Spain Norway
Italy Russia Switzerland Netherlands Portugal
Asia
China Japan Korea Arabia Turkey

Ge
*English, German and French as standard. Other layouts on request.

INSTALLATION AND MAINTENANCE GUIDE



F1
Decrease display brightness
F9
Fast-forward
F2
Increase display brightness
F10
Mute sound
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F11
Decrease volume
F4
Dashboard
F12
Increase volume
F7
Rewind Eject disc
F8
Play / Pause Command
Supporting layouts
America
United States
*English, German and French as standard. Other layouts on request.
MAC keyboard integrated with trackball
Mb
cUcT
MAC keyboard integrated with touchpad
Me
cUcT

INSTALLATION AND MAINTENANCE GUIDE
 * Please ask your supplier for full details
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast

■Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■104 key notepad keyboard with full numerical pad and SUN function
■USB interface
■US layout only

Num LED in Green mode
Key pad behaves as a normal key
pad mode
Num LED in Off mode
Key pad behaves as a SUN Solar
system administration command mode

S keyboard integrated with touchpad
Se
Num Cap s Scro ll Comp ose
S keyboard integrated with trackball
Sb
Num Cap s Scro ll Comp ose

nVent.com/SCHROFF |17
INSTALLATION AND MAINTENANCE GUIDE
On-screen Display Operation (OSD)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / o󰀨 LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function

INSTALLATION AND MAINTENANCE GUIDE
On-screen Display Operation (OSD)
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the di󰀨erence between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness : Adjust the image from weak to sharp
1
PC
Auto adjust : Automatically adjust sizes, centers and ne tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
H. Position : Align the screen image left or right
V. Position : Align the screen image up or down
2
MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the o󰀨 time
PIP mode : Adjust picture in picture setting
PIP position : Enter into PIP position
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
4
Audio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass : Set the value of bass sound
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn o󰀨 the surrounding sound
3

INSTALLATION AND MAINTENANCE GUIDE
Options:
( HDCP 1.4 )
- HDMI 1.4
( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to x the issue.
Power
KVMDVI-D
HDMI

INSTALLATION AND MAINTENANCE GUIDE
Options : DC Power
Model 12V 24V 48V 125V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 50 mA 35 mA
- Full load 4950 mA 2450 mA 1220 mA 749 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A 6.25A
E󰀩ciency 84% 85% 85% 91%
( 1 ) If the unit with LCD, earthing may be required
( 2 ) DC option excludes AC power adapter and power cord.
( 3 ) F1417 chassis extension in depth to 490mm (19.3”)
For DC power option :
***
DC power
DVI-D KVM