INSTALLATION AND SETUP
04
Before you begin the installation, you must remove1
the graphics driver currently on your computer.
Go to Start>Control Panel>Programs and Features
If you have an NVIDIA graphics card, double click NVIDIA Drivers.*
Select the option> Remove only the following.
Select> NVIDIA Display Driver
Click> Remove
Restart your computer>
* If you are replacing a non NVIDIA graphics card, be sure to remove the graphics
driver and power down your system to replace the card before continuing.
Insert the GeForce 3D Vision Software and Manuals CD drivers.2
Select3 Install GeForce Graphics driver.
Select4 Yes, I want to restart my computer now when prompted.
The installation process automatically continues after restart.
Select5 Next to install the GeForce 3D Vision driver.
Select6 Finish to complete the installation. The GeForce 3D
Vision Setup Wizard automatically begins when the InstallShield
completes. The Setup Wizard takes you through installing the IR
emitter, setting up your display, and configuring the glasses.
Select7 Next to begin the Setup Wizard. The Wizard is very intuitive
and easy to follow.
Connect your IR Emitter when prompted to do so.8
Select your gaming environment.9
3D Ready display found.10
Turn on your glasses.11