NYZ Apollo1 User manual
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Apollo1
Product Overview Bluetooth Connection
Pick up the two earbuds
from the charging case.
Pull off the protective film.
Turn on Bluetooth of the
device, search for the
bluetooth name: Apollo 1,
click it to connect.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Put them in and take them
out.
Step 2
Step 1
Step 3
The white light blinks
for reconnect
One earbuds white light blink
quickly when paired
When You Just Use To The Left Earbuds
Bluetooth
Settings
Apollo 1
Apollo 1
Mobile Phone
iPhone
iPad Air
Bluetooth
Other DEVICES
Step 1
Select the new search for
the bluetooth name: Apollo 1,
click it to connect.
Note:When you take out the left earbuds from the charging case after first time used the
left earbuds alone, they will connect with the most recently connected device.
Step 2
When you using the left earbuds alone for the first time:
Take out the left earbuds
Disconnection
Put the earbuds into the charging
case. The Bluetooth connection
will end.
Alternatively, tap on the turn off
the Bluetooth function on your
device.
Bluetooth
Settings
Bluetooth
Apollo 1
iPhone
iPad Air
Note:When you take out the earbuds from the charging case, they will connect with the
most recently connected device.
Step 1
Step 2
Tap Operation
Take out from case
(Automatic) (Manual)
(Automatic) (Manual)
Power on：White light holding 1 seconds
Hold MFB on each earbuds
for 5 secs
L/R
L/R
Place in case Hold MFB on each earbuds
for 5 secs
Power off：Red light holding 1 seconds
Note:The earbuds will automatically shut down after entering BT pairing for 2 minutes.
Play/Pause
L/R
Answer call/End call
Tap
x1
L/R
Tap
x1
L/R
L/R
Tap
x3
Voice Assistant Reject / Hang up
Press
1s
Next Track
R
Tap
x2
L
Tap
x2
Previous Track
Charging And Working Time
Fully charged in 1.2 hours
8 hours for playtime
Fully charged in 2 hours
Provide 4 times charging for earbuds
Reset
The earbuds needs to be reset in the following situations:
1. The earbuds cannot be paired automatically.
2. The earbuds cannot be connected to bluetooth due to in correct operation.
3. Try resetting when one headset is not working but the indicator is charging
properly.
4. Mismatch of headset connected devices.
5. You can try to reset it in any case when it is not working.
Red light blink 3 times
Hold on the multifunction touch for 3 seconds to power
on both the earbuds.
Place the earbuds in the charging case.
Step 2
Step 1
Step 3 Put off your hands.
The white light is power off .(At this time, the earbuds cleared the previous pairing
information.)
LR
Charging Case Charging Port
Charging Case Battery Indicator Light
Charging Pins Cover
Multifunction Touch
(MFT)
Magnetic Interface
LEFT RIGHT
Ear Tips Smart Display Light
Table of contents
