Oakcastle DVD100 User manual

DVD·100
USER MANUAL

2
EN CONTENTS
Box Contents ����������������������������������������������������������������������������������������������������������������� 3
Controls & Functions ���������������������������������������������������������������������������������������������������� 4
Getting Started�������������������������������������������������������������������������������������������������������������� 7
DVD Operation �������������������������������������������������������������������������������������������������������������� 8
USB Operation��������������������������������������������������������������������������������������������������������������� 9
System Set-Up ������������������������������������������������������������������������������������������������������������� 10
Troubleshooting���������������������������������������������������������������������������������������������������������� 15
Specication & Warranty ������������������������������������������������������������������������������������������� 16
Safety Information������������������������������������������������������������������������������������������������������ 17
Register your product online for a FREE 3 year
extended warranty at: www.oakcastle.co.uk
3YEAR
WARRANTY

3
EN
BOX CONTENTS
WHAT’S IN THE BOX
A. Oakcastle DVD100 DVD Player
B. Remote Control
C. User Manual
D. 2 x AAA Batteries
E. RCA AV Cable
F. Power Adapter
G. USB Power Cable
A
B
C
D
EG
F

4
EN
REMOTE CONTROL
CONTROLS & FUNCTIONS
1
3
4
2
5
7
6
9
8
10
11
13
14
16
15
18
17
19
20
22
21
24
26
25
27
29
28
30
31
33
32
35
34
36
23
12

5
EN
CONTROLS & FUNCTIONS
CONTROLS & FUNCTIONS
1. On/O
2. Angle: Change angle in DVD mode (for
discs with multi-angle recording)
3. Programme (See page 7)
4. 0-9/10+: While playing DVD/VCD/CD/
MP3 discs, use key to select desired
track/chapter in menu selection.
5. Rewind (<<)
6. Fast Forward (>>)
7. L/R: Use for VCD or CD discs. Press to
select left or right channel, or stereo
8. Play/Pause
9. Setup: Press for setup menu
10. Navigate up
11. Navigate left
12. Enter/Conrm
13. Menu: Return to main DVD title menu
14. Mute/Unmute
15. Audio
16. Volume up (+)
17. OSD
18. Volume down (-)
19. Zoom: During DVD playback, press
repeatedly to zoom in or zoom out the
frame. When in zoom in mode, use
arrow keys to move picture.
20. Open/Close DVD Tray
21. Subtitle (disc dependent)
22. Video: Switch to video output mode
(cvbs.yuv.ypbpr)
23. GOTO: Press once to bring up ‘GOTO’
menu. Use the number keys to input
Title or Chapter number and time, and
use the arrow keys to move between
Title/Chapter/Time input.
24. Next (>>I): In DVD mode, press to go to
next chapter. With SVCD, VCD, CD, MP3
discs and USB, press to go to next track.
25. Previous (I<<): In DVD mode, press to
go to previous chapter. With SVCD, VCD,
CD, MP3 discs and USB, press to go to
previous track.
26. Stop
27. Title: Go to Title menu
28. Navigate right
29. Navigate down
30. Return: Return to the root DVD menu.
31. Reset: Reset DVD player settings
32. Repeat: Press repeatedly in DVD mode
to scroll through the following options:
repeat the Chapter, Title, All tracks/
scenes, or Repeat O. In SVCD, VCD or
CD mode: Repeat Track, Repeat All or
Repeat O.
33. A-B: Press to repeat certain sections.
Press button on start point (A) and the
end point (B) to select section. Cancel by
pressing button a third time.
34. P/N: Open the disc tray, then press to
switch the TV system between AUTO,
PAL and NTSC.
35. USB: Press to switch between DVD/USB.
36. Slow: Press to select slow speed playing
(press repeatedly to select between 1/2,
1/4, 1/8, 1/16 slowed)

6
EN
CONTROL BUTTONS
CONTROLS & FUNCTIONS
37. DVD Tray
38. Display
39. Remote Sensor
40. USB Port
41. Open/Close
42. Play/Pause
43. Stop
44. Power On/O
45. (Y.Pb/Cb.Pr/Cr) Output
46. HDMI Output
47. 2 x Audio Output ports
48. Video Output
49. Power Port
37 39 40
41
42
43
44
38
45
47 4846 49

7
EN
GETTING STARTED
Setting Up
Connect the DVD player power adapter to a wall outlet. Press the power button
(Ref.44/Ref.1) on the unit or remote control to turn on your DVD player, the display
on the front panel will illuminate.
Follow one of the steps below for connecting your DVD player:
Connecting Via RCA Cable
Connect an RCA cable between the 2 channel Audio Output port and the RCA input
on your TV.
Connecting via HDMI
Connect a HDMI cable between the HDMI Output on the back panel of the DVD
player (Ref.46) to the HDMI input on your TV.
Connecting via Component (Y Pb/Cb Pr/Cr) Cable
Connect a (Y Pb/Cb Pr/Cr) cable via the (Y/Cb/Pb Cr/Pr) Output of the DVD player
(Ref.45) to your TV (R/L/Video port and cable).
Programme Button
If the disc has two or more tracks, chapters, or titles, if desired, you can set up
playing order preference to be in a dierent order to the default order. Press the
PROG button (Ref.3) to open up Program mode, then use the number buttons
(Ref.4) to input the number of the track, title or chapter. To enter a double digit
number, rst press the 10+ button once to get 10, twice to get 20, and so on,
followed by the second digit of your preference. Use the up/down/left/right keys
(Ref.10/Ref.11/Ref.28/Ref.29) to move the cursor to the next track, chapter or title
position you wish to program. After programming, navigate to the ‘PLAY’ button on
the screen, then press ENTER button (Ref.12) to start program playing. Navigate
to the CLEAR button on the screen, then press ENTER button (Ref.12) to clear all
settings.
To exit Program mode, press the PROG button (Ref.3) again.

8
EN DVD OPERATION
Supported Disc Types: CD, CD-R, CD-MP3, CD+RW, DVD, DVD+R, DVD-R, DVD+RW,
DVD-RW
Supported File Types: MP3, MP4, DVD, DVD-R-RW, MPEG2, MPEG4
1. Ensure that your TV is set to the correct mode for DVD playback.
2. Plug in the DVD player and press the ‘Power’ button to turn the unit on. You can
do this on the unit (Ref.44) or via the remote (Ref.1).
When the machine is switched on, pressing the POWER button on the remote
control will make it go into standby mode (Ref.1). Press the button again and the
machine will switch on.
WARNING: If the product will not be used for an extended period of time, it is
advisable to unplug it for safety.
3. Press the Open/Close button on the front panel (Ref.41) or on the remote
control (Ref.20) and place a DVD disc on the disc tray. Press the Open/Close
button again to close the tray.
4. The DVD player will read the DVD disc and begin playing. You can control the
playback and settings via the remote control.

9
EN
USB Playback
This device has a USB port in the front interface for MP3/Movie playback.
Insert a USB device into the USB port (Ref.40).
Press the USB button on the remote control (Ref.35) and select ‘USB’ to switch the
source to USB. The DVD player will display the le list on the USB drive and start
playing the rst track.
Browse through the le list by pressing the up and down buttons (Ref.10/Ref.29)
on the remote control. Select a le by pressing the Enter button (Ref.12) of the
remote control.
USB Drives and MP3 Discs - Playback controls
When playing from an MP3 disc or USB drive, use the following playback controls.
Use the Play/Pause button (Ref.8) to play or pause a track.
Use the Stop button (Ref.26) to stop a track.
Press the Previous/Next buttons (Ref.25)/(Ref.24) to skip to the previous or next
track.
Use the Rewind/Fast Forward buttons (Ref.5)/(Ref.6) to rewind or fast forward
through a track.
Programme Mode
To begin programming the tracks to play in a specic order, press the PROG
button (Ref.3). Use the buttons to shift to the next track position you
wish to program. Then use the digit buttons (Ref.4) to key in the track you wish
to program to that position. Follow these steps for each track slot. When nished,
select Start to play the tracks in that order.
To exit Program mode, press the PROG button (Ref.3) again.
Note: USB port does not support USB charging for external devices.
USB OPERATION

10
EN
Press the SETUP button (Ref.9) on the remote control and the Settings will display.
The menu options are as follows:
Menu 1: System Setup
Menu 2: Language Setup
Menu 3: Video Setup
Menu 4: Audio Setup
Menu 5: Digital Setup
After accessing the Setup menu, use the buttons (Ref.10)/(Ref.11)/
(Ref.28)/(Ref.29) to access your chosen sub-menu/function. Press left to go up
back up a level, and press right to go down a level into the selected sub-menu/
function options. Press the ENTER button (Ref.12) to conrm your selection.
To exit SETUP mode, press the SETUP button again (Ref.9).
Follow the guidance on the next pages for editing these settings.
SYSTEM SET-UP
MENU OPERATION
Table of contents
Other Oakcastle DVD Player manuals

















