Oakley RAZRWIRE User manual

™
USING RAZRWIRE™The remaining functions of RAZRWIRE™depend on which Bluetooth®profile and features
your cellular phone supports. Consult the user’s guide that came with your phone, then use
the appropriate table below:
HANDSFREE PROFILE
HEADSET PROFILE
TURN RAZRWIRE ON
ANSWER A CALL
ADJUST VOLUME
MUTE THE MICROPHONE
END A CALL
TURN RAZRWIRE OFF
Press the multifunction button briefly.
Press the multifunction button briefly.
Press the front button repeatedly to increase the volume.
Press the middle button repeatedly to decrease the volume.
Press and hold middle button (the “volume down” button) for 2 seconds.
Press the multifunction button briefly.
Press and hold the multifunction button for 4 seconds.
REJECT A CALL
DIAL BY VOICE
REDIAL A NUMBER
PUT A CALL ON HOLD
ANSWER 2ND INCOMING CALL
TOGGLE BETWEEN TWO
ACTIVE CALLS
TRANSFER CALL FROM
PHONE TO RAZRWIRE
Press and hold the multifunction button for 2 seconds
Press the multifunction button briefly then speak the name
Press and hold the multifunction button for 2 seconds
Press and hold the front button for 2 seconds
Press and hold the front button for 2 seconds
Press and hold the front button for 2 seconds
Press the multifunction button briefly
(AND PUT CURRENT CALL ON HOLD)
SEND A NUMBER DIALED ON
THE PHONE
DIAL BY VOICE
REDIAL A NUMBER
TRANSFER CALL FROM
PHONE TO RAZRWIRE
Press the multifunction button
Press the multifunction button then speak the name
Press the multifunction button to recall the number, then press again to send
Press the multifunction button
Razrwire_addition_a 9/1/05 5:10 PM Page 1

VISUAL INDICATORS AUDIBLE INDICATORS
DURING CHARGING
DURING PAIRING
WHILE NOT ON A CALL
(STANDBY MODE)
WHILE A NEW CALL IS COMING IN
WHILE ON A CALL
The indicator light is solid red while charging. It turns off
completely when charging is complete.
The light stays on. (If the light is not solid red, you will not be
able to pair with the phone you are using.) The light flashes
rapidly 10 times when pairing is successful.
The light is completely off.
The light turns on every six seconds and stays on for two seconds.
The light turns on every six seconds and stays on for two seconds.
NO AUDIBLE TONES;
DETERIORATING AUDIO QUALITY
SINGLE HIGH TONE DURING
VOLUME ADJUSTMENT
RING TONE
SINGLE LOW TONE
DUAL HIGH/LOW TONE
FAST HIGH/LOW TONE
EVERY FIVE SECONDS
FOUR TONES, LOW TO HIGH
FOUR TONES, HIGH TO LOW
Out of range. (Move RAZRWIRE™closer to your phone.)
Maximum or minimum volume level is reached.
Incoming call.
Ready for voice dialing. (When heard after pressing the
Multifunction Button, speak the name of the person you want to dial.)
The name of the person you want to dial is not recognized.
Low battery.
No network/service. (Your cellular phone is currently unable to
communicate with your phone service.)
RAZRWIRE™is powered on
RAZRWIRE™is powered on
™
Razrwire_addition_a 9/1/05 5:10 PM Page 2