OBD2 SCANZ User manual

OBD2 SCANZ
BAT Check
Setup

Safety precautions
To avoid body injury and damage to the device or your car,
please read this manual carefully before using it.
The testing process described in the manual is generally the
experience of technician.
Safety precaution is required in most of
the process to avoid body injury and damage to the device or
your car.
Read the vehicle maintenance manual before use this device
and follow safety precautions.
▪ It generates CO and other poisonous air when engine is
running. To avoid
this kind of hurt, please repair the car in a well-air-ventilated
place.
▪ When the engine is running, many parts (such as the coolant
fan,
pulleys, fan belt etc.) rotate at high speed. To avoid serious injury,
always be aware of moving parts. Keep a safe distance from
these
parts as well as other potentially moving objects.
▪ Engine parts become very hot when the engine is running. Don’t
touch hot engine parts to avoid severe burns.
▪ When the ignition is ON, Connecting or disconnecting test
equipment
will damage test equipment and the vehicle's electronic compo-
nents. Turn the ignition OFF before connecting or disconnecting
the device from the vehicle's Data Link Connector (DLC).
▪ Fuel and battery vapors are highly flammable. To prevent an
explosion,
keep all sparks, heated items and open flames away from the
battery
and fuel/ fuel vapors. Do not smoke near the vehicle during
testing.
1

1. coverage：
1) Support vehicles for VW, AUDI, SKODA, SEAT and BENTLEY
etc .
2) Supports all VW diagnostic protocols: UDS, TP20, TP16,
KWP2000 and KWP1281.
Supports all OBDII/EOBD protocols : VPW, PWM, ISO, KWP 2000
and CAN
2. Product specification
▪ 2.8’LCD,320 X 240 pixels color screen
▪ Operating Voltage: 8V-18V
▪ Operating Temperature: 0°C-60°C(32-140°F)
▪ Storage Temperature: -20°C-70°C(4-158°F)
2

BAT Check
Setup
3. Appearance and buttons description
3
9

1) LCD DISPLAY – Indicates test results. Backlit, 320 x 240
pixels display.
2) [OK] BUTTON – Confirms a selection (or action) from a menu.
3) ESC BUTTON – Cancels a selection (or action) from a menu
or returns to the menu.
4) [LEFT ]SCROLL BUTTON –in the menu mode through the
menu and sub menu move to the left, when rolling in a data
interface, use the left button can be moved to the last screen.
5) [RIGHT] SCROLL BUTTON –In the menu mode through the
menu and sub menu item move to the right, when rolling in the
data interface, use the right button can be moved to the next
screen.
6) [UP] SCROLL BUTTON –in the menu mode through the menu
and sub menu item moving up. When retrieving data for more
than a screen by moving up the screen to the previous screen for
more data.
7) [DOWN] SCROLL BUTTON –In the menu mode through the
menu and sub menu item moves down. When retrieving data
more than one screen, by moving down the screen to the next
screen for more data.
8) OBD-16PIN CONNECTOR – Connects the scan tool to the
vehicle’s Data Link Connector (DLC).
9) [I/M] BUTTON - Quick State Emissions readiness check and
drive cycle verification.
10) [READ DTC] BUTTON-Quick read the vehicle’s fault codes.
4

OPERATION INSTRUCTIONS
1. Connect OBD2 SCANZ
1.1 Turn the ignition on.
1.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
2. OBD2 SCANZ Features
2.1 For VW
Choose [For VW ] and then select [Vehicle Scan]. As follows:
Remark: [ System Scan] is used to check faulty systems and
display the number of faults
[ Manual Select ] uses to scan all supported systems.
Select Menu
Vehicle Scan
System Selection
Crafter(LT3) 2006-2017
Special Functions
1/4
Select Menu
System Scan
Manual Select
Select System
0017-Dash Board 4
0019-Gateway 5
0061-Battery Regulation 1
1/3
5

2.1.1 Choose [System Scan ], select [ 0017-Dash Board], The
screen displays as follows:
2.1.1.1 Choose [ 01-version information ] The screen
displays as follows:
2.1.1.2 Choose[ Read Fault Codes ]. The screen displays as
follows:
Select System
0017-Dash Board 4
0019-Gateway 5
0061-Battery Regulation 1
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
01-Version Information
Protocol Type: CAN20
VW/Audi part number:3C
0920870T
VIN:
System description:
KOMBIINSTRUMENT VD1
01-Version Information
Serve station code: 01 81 CD
34 4C 04
Coding: 7505
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
1/3 1/7
2/7
01312 Drive train data bus
02-Read Fault Codes
1/4
6

2.1.1.3 Choose[ Erase fault codes ], then press [OK] button .
The screen displays as follows
Information
Erase fault codes!
Are you sure?
Erase fault codes had success.
Please wait 10 seconds, Turn ignition
off and Switch on again.
Read fault codes to verify.
Information
2.1.1.4 Choose[ Read Datastream], if enter number:005 . The
screen shows as follows
2.1.1.5 Choose[ Basic setting], if enter number:005. The
screen shows as follows
Input channel
Delete
3/12
lnput a channel number
(0~255)
OK
0
1
2
3
4
Special Functions
ASCLL Characte
Count
1/3
ASCLL Character
Count
- -
- -
300
365
CH:5
Input channel
Delete
3/12
lnput a channel number
(0~255)
OK
0
1
2
3
4
This function is not supported
on this vehicle
Note!
When ten test function is
abnormal,Please use the
feedback function(tool setup)
Throttle Learning
7

2.1.1.6 Choose [ Adaptation ], select [ Input channel ], if enter
number:005. The screen displays as follows:
07-Adaptation
Input channel
Select Function
1/2
Input channel
Delete
3/12
lnput a channel number
(0~255)
OK
0
1
2
3
4
005
07-Adaptation
This function is not supported
on this vehicle
Note!
When ten test function is
abnormal,Please use the
feedback function(tool setup)
07-Adaptation
feedback) to save the test
records, Carry out vehicle test
again, then use the upgrade tool
to export record file. Mail the file
at last.
Choose [ Select Function ], select [ Input channel ], if enter
number:005. The screen displays as follows：
Select Function
001 Tank Chararacteristic(F...
CH:002 Service reminder
CH:002 Restting Service ln...
CH:002 Consumption display
CH:002 Consumption Corre...
CH:002 Language
CH:002 Languane for error ...
1/84
Input channel
Delete
3/12
lnput a channel number
(0~255)
OK
0
1
2
3
4
005
8

2.1.1.7 Access Authorization
2.1.2 Gate way
More further operations, please refer to 2.1.1.1 to 2.1.1.7
2.1.3 Battery Regulation
More further operations, please refer to 2.1.1.1 to 2.1.1.7
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
7/7
08-Access Authorization
Delete
3/12
Login code (Enter five
decimal digits)
OK
0
1
2
3
4
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
2/7
Select System
0017-Dash Board 4
0019-Gateway 5
0061-Battery Regulation 1
1/3
Select System
0017-Dash Board 4
0019-Gateway 5
0061-Battery Regulation 1
1/3
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
2/7
9

2.2 System Selection:
2.2.1 Choose [ System Selection ], click [ Common System],
Select one system to test, more operations, please refer to 2.1.1
to2.1.3
2.2.2 Choose [ All System ], the screen displays all support-
ed systems, then select one systems to test.
Select System
0001-Engine Control Modu...
0002-Transmission Contro...
0003-Brakes 1
0008-Air Conditioning
0009-Central Electrics
0015-Airbag
0016-Steering Column Ele...
1/14
Select Menu
Common System
All Systems
1/2
Select Function
01-Version Information
02-Read Fault Codes
03-Erase Fault Codes
04-Read Datastream
05-Basic Setting
07-Adaptation
08-Access Authorization
1/7
Select System
0001-Engine Control Modu...
0002-Transmission Contro...
0003-Brakes 1
0008-Air Conditioning
0009-Central Electrics
0015-Airbag
0016-Steering Column Ele...
1/14
Select Menu
Common System
All Systems
2/2
10

2.3 Crafter (LT3) test:
Select Menu
System Scan
System Selection
Crafter(LT3) 2006-2017
Special Functions
3/4
System Scan
Manual Select
2/2
Scanning...[3%}
0001-Engine Control Modu...
1/1
2.4 Special Functions:
Choose [Special Functions],
Select Menu
System Scan
System Selection
Crafter(LT3) 2006-2017
Special Functions
3/4
Special Functions
Service Reset
Throttle Learning
EPB ReplaceBrakePads
Diesel Engine Special Fun...
Steering Angle Learning
Tire Pressure Reset(TPMS)
Injector Adaptation
1/7
11

Choose one of special functions, such as [Service Reset]. Press [
OK ] to continue:
Service Reset
Service Reset
Flexible lnterval
Fixed lnterval
1/3
Choose [Flexible Interval], It displays as follows:
Service Reset
Service Reset
Flexible lnterval
Fixed lnterval
2/3
Flexible lnterval
CH:42 Min Mileage:15000km
CH:42 Min Mileage:30000km
CH:49 Min Time lnterval:36...
CH:49 Min Time lnterval:73...
CH:43 Max Mileage:15000km
CH:43 Max Mileage:30000km
CH:44 Min Time lnterval:36...
1/9
Flexible lnterval
CH:44 Min Time lnterval:36...
CH:45 oil Quality
7/9
Fixed lnterval
CH:50 Fixed Mileage:15000km
CH:50 Fixed Mileage:30000km
CH:51 Fixed Time lnterval:36...
CH:51 Fixed Time lnterval:73...
CH:45 oil Quality
1/5
12

Service Reset
Service Reset
Flexible lnterval
Fixed lnterval
Remark: Before setting the maintenance interval, do set the
corresponding [ oil quality ]
If vehicle uses UDS protocol, you could do inspection due reset,
service reset, and mileage and time settings. Settings of mileage
and time support be input manually with any value you want.
3. EPB reset
Choose [ EPB reset ], press [ OK ] button to continue
OBDII For vw Oil reset
BMS resetBATEPB reset
Tool SetupETCS reset
1.Please turn the ignition ON
with engine OFF.
2.Release the handbrake.
Information
3.1 Choose [ EPB replace brake pads ], press [ OK ] button
to continue:
3/3
EPB ReplaceBrakePads
EPB ReplaceBrakePads
Retraction BrakePump
Release Brake Pump
1/3
Perform this function
Are you sure?
Information
13

Retract the brake pump , please pay attention to the operation
tips, and press [OK] button to continue:
3.1.1 Check whether the brake pump is completely released.
The operation of replacing the brake pads is finished, press [
OK ] to complete
Has been performed,
Press [OK] to continue.
EPB ReplaceBrakePads Information
Replace the brake pads.
After finish, Press [OK] to
continue.
Information
Please check complete
retraction.
Press [OK] to continue.
Has been performed,
Press [OK] to continue.
EPB ReplaceBrakePads
Information
Please check completeretraction.
After check Press [OK] to
continue.
14

3.2 Choose [Retraction Brackpump] , press [ OK ] to
continue:
3.2.1 After retract brakepump, press [ OK ] to continue:
Information
Perform this function
Are you sure?
Has been performed,
Press [OK] to continue.
EPB ReplaceBrakePads
3.2.2 Check whether the retraction is completely, then start
to replace the brake pads. After finished, press OK to
continue:
Information
Please check complete
retraction.
Press [OK] to continue.
15

3.3 Choose [Release Brake Pump] , press [ OK ] to continue:
3.3.1 Release Brake Pump, and press [ OK ] to continue:
4. Battery Registration
Choose [ BMS reset] option , press [OK] button. The screen
displays as follow:
EPB ReplaceBrakePads
EPB ReplaceBrakePads
Retraction BrakePump
Release Brake Pump
1/3
Perform this function
Are you sure?
Information
Has been performed,
press [OK] to continue.
EPB ReplaceBrakePads Information
Please check complete release
After finish, press [OK] to
continue.
Battery Registration
0019-Gateway
0016-Battery Regulation
008C-Battery Energy Contr...
1/3
16

4.1 Press [ OK ] button again , The screen will displays old
battery parameters.
It is better to record the parameters to prevent the old
battery parameters from being restored when the new
battery parameters are not available.
4.2 Choose new battery capacity and manufacturer:
Remark: If manufacturer is not been indicated in the list, please
choose others
4.3 Press [ OK ] button to continue:
Battery Registration
Press [OK] to continue
Description Battery Value
Capacity(Ah) :95Ah
Manufacturer :VARTA[VAO].
Select battery capacity
95Ah
110Ah
68Ah
75Ah
92Ah
105Ah
115Ahh
8/20
Select battery manufacturer
Moll[MLA]
VARTA[VAO]
JCI/JCB[JCB]
Exide[TU3]
JFF(Boading)/China[5D0]
Banner[BA2]
EPN[EPM]
1/8
Battery Registration
Press [OK] to continue
Configure New Battery Value
Capacity(Ah) :95Ah
Manufacturer :VARTA[VAO].
Battery Registration
Press [OK] to continue
Matching New Battery Value
Capacity(Ah) :95Ah
Manufacturer :VARTA[VAO].
17

Has been performed,
Press [OK] to continue.
Information
5. OBDII diagnosis
5.1 Read Codes
Stored codes are also known as "hard codes" or "permanent
codes". These codes cause the control module to illuminate the
malfunction indicator lamp (MIL) when an emission-related fault
occurs.
Pending Codes are also referred to as "maturing codes" or
"continuous monitor codes".
It indicates the problem that control module has detected during
the current or last driving cycle, but they are not considered
seriously.
Pending Codes will not turn on the malfunction indicator light,
and codes will be cleared from memory if there is no failure
during the following warm-up period
1) Use the UP/DOWN scroll button to select Read Codes from
the Diagnostic Menu and press [OK].
If there are no Diagnostic Trouble Codes, the display.
18
Diagnostic Menu
Read Codes
Erase Codes
I/M Readiness
Data Stream
Evap System Test
Vehicle Informationh
1/6