Ocean Matrix OMX-07HMHM0001 User manual

Operating Instruction
4 x HDMI 2.0 Inputs
4 x HDMI 2.0/1.4 Outputs
4 x SPDIF Coaxial Audio outputs
4 x Analog Audio outputs
Supports 4K@60Hz YUV 4:4:4
Audio Sampling Rates up to 192kHz
Supports HDR10, HLG, and Dolby Vision
Supports IR, RS232 control, TCP/IP control, web GUI control, or Push Button control
PCM2.0, Dolby True HD, DTS-HD Master Audio, and LPCM 7.1 Supported
Supports Analog and SPDIF Audio Extraction
18Gbps Bandwidth
HDCP 1.4 and 2.2 Compliant
Built-in EDID Management and Learning
The Ocean Matrix OMX-07HMHM0001 allows up to four HDMI source device connections
to independently distribute any source to up to four connected HDMI displays. This HDMI
2.0 unit supports up to 4K@60Hz with flexible switching options for ease of use, as well
as digital and analog audio extraction. The OMX-07HMHM0001 also supports mixed 4K &
1080p display outputs and features built-in downscaling for simultaneously displaying 4K
content to a 4K monitor and 1080p content to a 1080p monitor.
Description:
Features:
Specifications:
Operating Temperature: 32 F to 104 F
Max Resolution: 4K@60hz YUV 4:4:4
Ethernet Port (IP Control): RJ45 Female
IR Ext Port: 1 x 3.5mm Stereo Jack
Bandwidth: 18 Gbps
Dimensions (LxWxH): 8.5 x 5.1 x 1.3in
Weight: 1.03lbs
Power Consumption: 14W (Max)
Product Includes:
1 x 12V/2A DC Power Supply
1 x Remote Control
1 x IR Ext RX Cable
5 x Phoenix Plugs for RS232 Cable Termination & L/R Audio Termination

Operating Instruction
LCD Screen / IR Receiver Window
Output 1-4: Press to choose an output, press again to cancel. Press and hold to
choose all outputs, press and hold again to cancel all.
Input 1-4: Press to choose one input, workable only if output is already choosen,
press and hold to choose one input for all outputs.
PRESET: PRESS TO ACCESS PRESETS.
UP Button
LOCK: Press and hold to lock, repeat to unlock. When locked, all other buttons are
not accessable.
MENU: Press to access main menu interface or return to the previous menu.
DOWN Button
ENTER: Press to confirm
1.
2.
3.
4.
5.
6.
7.
8.
9.
Operation Controls and Functions:

Connect source devices to input ports of the matrix
Connect HDMI output ports to a TV or other HDMI devices
Optional: Connect RS232 cable from PC RS232 port
Optional: Connect an ethernet cable from the TCP/IP port on the matrix to a local network
Connect 12V power supply to DC power socket
Power on the matrix, HDMI sources and displays
1.
2.
3.
4.
5.
6.
Operating Instruction
Analog Audio Out
S/PDIF Audio Out
RS232 Control
IR-Ext
Ethernet Port
DC12V/2A Input
HDMI Output
HDMI Input
1.
2.
3.
4.
5.
6.
7.
8.
Connecting and Operating:

Operating Instruction
Remote Control Description:
Power On / Standby
M: Turn off the HDMI output audio
W: Lock remote control
Outputs 1-4
All: Selects all outputs
X: Turn off ouput channel
PTP: Mirror all inputs and ouputs
Ex. Input 1 to output 1, input 2 to ouput 2
etc..
Inputs 1-4
For switching inputs left and right
For switching inputs left and right, up and down
1.
2.
3.
4.
5.
6.
7.
a.
8.
9.
10.
Power on / Standy: press for standby mode, LCD screen will show "System
Shutdown", HDMI output 5V will disconnect and TV without image. Press again to
wake device, HDMI output will return to normal.
Video Switch: output + input (ex. output 1 + input 2, switches output 1 to input 1)
Turn off HDMI Ouput Audio: output + M (ex. output 1 + M, turn off output 1 audio)
Lock Remote Control: press W to lock, press again to unlock
Turn off Output Channel: output + x (ex. output 1 + X, output 1 turns screen
black, output + X again, to return normal)
Switching Input Left and Right: output + < or >; (ex. All + <, TV image will change
according to the switching input and skip automatically if there is no input signal.
Note:

For example ：
To switch output 1 to input 4:
Press output 1 + input 4 to complete switch
Note: Press output + input to switch; then press input button again to switch input (no need to
repeatedly press output)
Signal switching options includes 4 switching channels, which can be randomly configured
as intput/output according to requirements to form a 1x4 to 4x4 matrix. It can switch any
input signal to 1 channel output or all channel outputs.
Operation format: "Output channel" + "input channel", or press and hold "input channel"
Video Switch Operation:
Operating Instruction
Panel Control Description:
There are 2 sub-menus in video interface: 1: Switching 2: On/Off
Select "Video" in the main menu, press "ENTER" button
Press "up and down" button to choose "Switching"
Press "Enter" to enter the next sub-menu
Press the "up and down" button to select "Output 1 - 4" ("All" means all ouput, "Switching")
Press "Enter" to enter the next sub-menu
Press the "up and down" button to select input
Press "Enter" button to complete video switching
Operation:
1.
2.
3.
4.
5.
6.
7.
Video Switching:
Video Control:

Operating Instruction
Video output is open by default but you can open/close any output port, or open/close all output ports:
In the main menu, select "Video" and press "Enter" button
Press "up and down" button to select "On/Off"
Press "Enter" button to enter the next sub-menu
Press "up and down" button to select "output 1-4"
Press "Enter" to enter the next sub-menu
Select Ouput-HDMI 1-4, press "Enter" button to enter the next sub-menu
Press the "up and down" button to select "Off" or "On"
Press "Enter" button to confirm that the output port is open/closed
1.
2.
3.
4.
5.
6.
7.
8.
Output Switch Control:

There are 2 sub-menus in audio control interface: Line out & De-Embed (both are
default open)
Audio Control Interface:
Operating Instruction

The default EDID is “Default1”
Default1 4K60444-LPCM:2.0,HDR:HLG
Default3 4K30444-LPCM:2.0,HDR:None
Default2
Default4
4K60 420-LPCM: 2.0, HDR:None
1080P60 444-LPCM: 2.0, HDR:None
Switch Output Audio:
EDID management: User EDID, build-in EDID, Copy EDID mode
EDID Setting Interface:
Operating Instruction
Select "Audio" in main menu and press "Enter" button
Press "up and down" button to select "Line out", press "Enter" button, you are
then able to select output 1-4 and all by pressing the "up and down" button. Press
"Enter" button to choose "on" and "off"
Ex. to mute an HDMI connected to output1, press "Audio", "Enter", "Line Out",
"Output1-HDMI1", "Off", "Enter"
"Line out" means switch HDMI output audio, you are able to mute the TV from any
one HDMI output channel
Operation:
1.
2.
3.
Audio Extraction Control:
Select "Audio" in the main menu and press "Enter" button
Press the "up and down" button to select "De-Embed", press "Enter" button, you
are then able to select output 1-4 or all via pressing "up and down". Press the
"Enter" button to choose "on" and "off"
Ex. to turn off audio extraction on HDMI output1 press "Audio", "Enter", "De-
Embed", "Output1", "Off", you will then return to the upper menu after "Enter"
"De-Embed" to set the output audio for both analog and SPDIF audio, can select or
mute any one audio channel
Operation:
1.
2.
3.

Select "EDID" in the main menu and press the "Enter" button
Press the "up and down" button to select "Input1"
Press the "Enter" button to enter the next sub-menu
Press the "up and down" button to select "Default1", press "Enter" to complete setting
Behind the selected EDID, it will show the max support resolution, audio format and audio channel
Ex. Switch default1 to output1:
Operation:
1.
2.
3.
4.
5.
Operating Instruction

Select "Preset" in the main menu and press "Enter" to enter the preset interface; you are able to
call, save and clear preset
Save preset: select "Save" and any presets 1-8, then "Enter"
Call preset: Call, and any presets 1-8, then "Enter"
Clear preset: Clear, and any presets 1-8, then "Enter" (the saved preset will return to the default)
The Preset interface can save the current video, audio, EDID, system settings, etc..., supports 8
different presets, can preset through the web, command, panel button, and recall
Preset control interface has three sub-menus:
Call Scene
Save Scene
Clear Scene
Operation:
1.
2.
3.
4.
Preset Application:
Operating Instruction

Select “Setup” in the main menu and press the ”Enter” button
Press the “up and down” button to select the “Baud”
Press the “Enter” button to enter the next sub-menu
Press the “up and down” button to select “9600”
press “Enter” to complete setting
Baud Rate Setting
4 options for baud rate setting: 9600, 19200, 57600, 115200. The default serial port is
115200
The below example is setting baud rate to 9600
Operation ：
1.
2.
3.
4.
5.
Setup interface can set serial port baud rate, DHCP switch, device reboot and factory reset.
Setup Interface
Operating Instruction
Baud Rate Setting:

Select “Setup” in the main menu and press the ”Enter” button
Press the “up and down” button to select ”Reboot”
Press “Enter” to enter the next sub-menu
Press the “up and down” button to select “Yes”
Press “Enter” to complete rebooting the device
Reboot:
Reboot device,default is“NO”.
Operation ：
1.
2.
3.
4.
5.
Select “Setup” in main menu and press the ”Enter” button
Press the “up and down” button to select “DHCP” setting
Press “Enter” to enter the next sub-menu
Press the “up and down” button to select “On”
Press “Enter” to open DHCP to allocate an IP address automatically
DHCP Switch:
DHCP On: dynamic IP address; DHCP Off: static IP address (default is DHCP
off) DHCP on operation:
1.
2.
3.
4.
5.
Operating Instruction

Factory Common: factory reset for video switch, EDID, audio and settings (IP address can’t be
factory reset when under “common”)
Factory All: factory set for video switch, EDID, audio, settings, presets and device name
Ex factory all operation:
Select “Setup” in the main menu and press the ”Enter” button
Press the the “up and down” button to select “Factory"
Press “Enter” to enter the next sub-menu
Press the “up and down” button to select “ALL” and press the “Enter” button
Press the “up and down” button to select "Yes” and press thr “Enter” button
Factory Reset:
There are two factory settings:
1.
2.
a.
i.
ii.
iii.
iv.
v.
Operating Instruction

Select “INFO” in main menu and press ”Enter” button
Press the “up and down” button to select “System” or “IP”, bottom color will turn white when
selected
Press “Enter” to enter the next sub-menu, then you are able to query device information
System interface ： query company name, device name and version information
IP interface ： query device IP address, MAC address and DHCP status
Operation ：
1.
2.
3.
Query Information Interface:
Operating Instruction

Operating Instruction

1).All commands start with “#”
2).“_” the underline cannot omit.
3) Command head,Parameter and target need to add one “SPACE”.
The following table is only an example.Please refer to the list of instructions.
Can be used to search command,after
feedback all open command format fields
receiving command, the system will
Example1
Type
Command head
Explain
Format
#cmd without
#cmd
Search all open command
Value
Choose correct COM port that connect to PC in parameter configuration area
Regulation
9.4.Command List
9.1 Open CommUart Assistant.
9.2 Comport setting:
9.3 Enter Port Command in Send options.
9. RS232 Control
Baud Rate:
Parity:
Data Bit:
Stop Bit:
115200 bps(Default)
None
8bit
1bit
Operating Instruction

Before configuring the device through the website, it is necessary to configure the IP
address of the computer configured with the device (mainly to ensure that the
computer and the device are set in the same network segment).
1). Open the network control center and set the computer's IP address ：
2). Choose to use Static IP, with the IP address set to 196.168.1.x (x ranges from 0 to 254,
but cannot be consistent with the device's IP address),
3). Subnet mask set to 255.255.255.0
4). Gateway set to 192.168.1.1
Web Control:
Change IP Address of PC:
Operating Instruction

Video interface:
1. Output ： 01 >> 02 ， 01 means input ， 02 means output ， all means all output
Operation steps:
Click 01 >> 01 or All ， then click input 01~04
Ex ： Switching input 1 to output 4 ； Click “04 >> 04” first, then click “01”
2. Input ： 01~04 means HDMI input 1~4
3. OFF ： Close output channel, click ”OFF” to close output channel; Click ”ON” to close
this function. The default is “OFF”
4. Store ： preset1~preset8. Recall: call the preset; Save: save the preset
Operation steps:
1 ） Call preset ： preset1 + Recall ， call preset1
2 ） Save preset ： preset2 + Recall ， save preset2
Default IP address for log-in: 192.168.1.168
Type in user name and password (default user name: admin; default password:
123456)
Note: it is suggested to use newer versions of Google, firefox, etc.. for better
compatibility.
Log in by Browser:
Operating Instruction
Click to choose the input or ouput port, rename in input box, then click save & exit
Click to choose preset, rename in input box, then click save & exit
Modify Port Name:
1.
2.
Note: Rename limit: 1-15 characters

Ex: Turn off audio on the unit connected to HDMI output1 (TV)
Click output1 HDMI, color will change on the TV, will only display video (no audio)
Re-click to turn on audio
Ex: Turn off HDMI output1 audio extraction
Click output1 De-Embed, color will change and audio for analog and SPDIF out will turn off
Re-click to turn on audio
1. Click output1-4 HDMI ： Turn off HDMI output audio ；
Operation:
2. Click output1-4 De-Embed ： turn off audio extraction function, also turn off SPDIF and a nalog
audio at the same time.
Operation ：
Audio Interface:
Operating Instruction