Ocean Matrix OMX-HDMI2-AEE User manual

Specifications
Compliance HDMI 2.0a and HDCP 2.2
Supports
4K2K@60 4:4:4 8bits
HDR 4K2K@60 4:2:0 10bits
ARC Audio Extraction & CEC Bypass
Transmission Distance Full HD resolution 1080p@60Hz up to 110 ft/34 m
Video Bandwidth Single Link 594MHz (18Gbps)
HDMI Audio Format PCM2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
Optical Audio Format PCM2, Dolby 5.1
Power Consumption 3W
Dimensions (LxWxH) 5x2.6x1 in/127x67x27mm
Weight 6.3 oz/178g Includes 1 - 5VDC/0.85A Power Adapter
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com
2 Pin Position Description
PIN 1 ON  Enable Audio Embedder
OFF  Disable Audio Embedder
PIN 2 ON  Embedder Connector - Toslink
OFF  Embedder Connector - 3.5mm
4 Pin Position Description
PIN 1 ON  Enable Audio Extractor - Toslink & 3.5mm*
OFF  Disable Audio Extractor
PIN 2 ON  Enable ARC Function—Toslink
OFF  Disable ARC Function
PIN 3 ON  Enable 4K2K60 (4:4:4) down scale to 4K2K60(4:2:0)
OFF  Disable 4K2K60 (4:4:4) down scale to 4K2K60(4:2:0)
ON  Factory Use
PIN 4 OFF  Permanent Position/Normal Mode
Dipswitch Positions
S/PDIF Input
Top
Reset
Power Input HDMI Input
Dipswitches
Stereo Input
3.5mm
S/PDIF Output
Toslink
Dipswitches Power LED
HDMI Output
Stereo Output
3.5mm
Bottom
INSTALLATION & SPECIFICATIONS
OMX-HDMI2-AEE
4K HDMI 2.0 Audio Extractor and Embedder
* When ARC function is turned ON (PIN 2), PIN 1 audio extraction is
via 3.5mm.
Installation
Embedding Audio
Extracting Audio
HDMI Cable
AUDIO Cable
HDMI Cable
HDMI Cable
HDMI Cable
AUDIO Cable
Amplified
Speakers

SAFETY PRECAUTIONS
1. To prevent fire or shock hazard, do not expose this equipment to high humidity and/or dust.
Do not use in an unprotected outdoor installation nor any area classified as overly damp or wet.
2. The temperature for installation should be kept between 32°F to 140°F (0°C to 60°C). Avoid direct
sunlight exposure or extreme changes of temperature over a short period of time.
3. Do not disassemble the unit or place it on an unstable base.
4. Do not drop the unit and avoid heavy impact.
5. This unit should not be permanently installed unless proper ventilation is provided. Any enclosure open-
ings must not be blocked or covered as they protect the unit from overheating.
6. Before cleaning, turn off the power and unplug the unit from all connections. Use a damp cloth. Do not
use liquid cleaners nor aerosol cleaners.
7. Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
8. Enclosure entry is dangerous. Never push objects of any kind, including liquids, into this unit through
openings as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock.
9. Do not attempt to open or service this unit yourself as opening or removing covers may expose you to
dangerous voltage and other hazards.
10.There are no user-serviceable parts inside the unit. If the unit requires service contact your authorized
dealer, or an authorized repair service company.
Troubleshooting
No image output
 Ensure power supply is firmly connected. Only use the 5VDC power adapter included with the unit.
 Check that the cables are securely connected.
 Check that the display/TV has been set to the proper channel.
 For PC connections via HDMI, set output mode to mirror or extend.
Display is unstable
 Check all connections.
 Connect the source directly to the display device to ensure there is a signal output.
Change the signal source if necessary.
 Use only high-quality copper cable.
Rev1a
Ocean Matrix
812 Kings Highway •Saugerties, NY 12477
www.oceanmatrix.com