19.
To secure the 2 worksurfaces (G&H), attach the junction connector plate (S), using
4x 6x20mm socket button head machine screws (W), in the position shown above.
Repeat steps 17 - 19 for all units.
18.
Lower the worksurfaces (G&H) onto the brackets (X&Y) attached to the structure in
steps 17. Attach the worksurface fixing brackets (X&Y) to the underside of the
worksurfaces (G&H) using 1x 6x20mm socket button head machine screw (W) per
small bracket (Y) and 2x 6x20mm socket button head machine screws (W) per large
bracket (X).
W
W
W
W
W
WW
W
W
H -1
Return
Worksurface
G-1
1400w Den.Cube = 1300w Worksurface
1600w Den.Cube = 1500w Worksurface
4mm Allen Key
W
6x20 Button
Head Bolts
DEN.Cube Assembly Instructions DWG No: SASS-0074
Revision: A (03/11/15)
Drawn by: CE
Drawn date: 08/09/15
Y
Small Worksurface
Fixing Bracket
X
Large Worksurface
Fixing Bracket
WS
Underside View
200
200
200
25
250
C
L
W
M6 x 20mm Button
Head Bolts
(x9 per Worksurface)
17.
Attach the worksurface fixing brackets (X&Y) to the Den structure using 1x 6x20mm socket button head machine screw (W) per small bracket (Y) and 2x 6x20mm socket button
head machine screws (W) per large bracket (X), in the positions shown above. Use the top holes/slots for a 730mm worksurface height and the bottom for a 750mm worksurface
height. (see above)
When fixing the small brackets (Y) to the structure, make sure to pass the machine screws (W) through the 7mm hole. When fixing the Large brackets (X) to the structure, make sure
to pass the machine screws (W) through the horizontal slot.
750mm Worksurface
height
XY
730mm Worksurface
height FRONT
BACK
X
4mm Allen Key
Y
Small Worksurface
Fixing Bracket
X
Large Worksurface
Fixing Bracket
W
6x20 Button
Head Bolts
W
W
W
W
W
W
W
W
W
Y
FRONT
BACK
X
FRONT
BACK
X
