Olympia Tools 87-264 Assembly instructions

Questions, problems, missing parts?
Before returning to the store, call
Olympia Tools Customer Service: 866-461-8665
M-F 8am to 5pm PST
Owner’s Manual & Safety Instructions
USE AND CARE GUIDE
Keep this manual for safety warnings and precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly
diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Save This Manual
87-264
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
27 in. 4-Drawer
Tool Cabinet
with Power Strip
(4 Outlet + 2 USB Ports)

Table of Contents
Table of Contents
Safety Information
Specifications
Assembly
Operation
Maintenance
Replacement Parts
2
2
3
4
5
5
6
Safety Information
1. Secure this product properly before moving it with a
forklift.
2. Do not alter this product in any manner. For example,
do not weld external lock bars or attach electrical
equipment.
3. When locking this chest, close the drawers rmly
completely in order for the lock bars to work properly.
OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. [phone] / Fax. [phone] / Web. www.olympiatools.com
2
CAUTION: Keep the product on level surfaces. The product may become unstable and tip if
stored or moved on an unlevel surface, which may cause personal injury or product damage.
and tip, which may cause personal injury or product damage.
CAUTION: Be careful when opening more than one drawer. The product may become unstable
CAUTION: Do not attach or mount this product to a vehicle. This may cause personal injury
or product damage. Mounting this product to any vehicle in any manner will void warranty.
CAUTION: Lock the drawers before moving this product. The drawers could come open and
make the product unstable and tip, which may cause personal or product damage.
CAUTION: Two people are needed to safely move this unit.
CAUTION: Do not stand on this product. You may fall which may cause personal injury.

Specifications
OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. [phone] / Fax. [phone] / Web. www.olympiatools.com
3
Packages Contents
NOTE: Begin product assembly close to the nal intended
location of your cabinet. This product is heavy and may be
difcult to move after assembly.
NOTE: Hardware not shown to actual size.
Maximum weight per (chest drawer)
Maximum product weight, including contents
50 lbs.
600 lbs
• Hardware Included
Part
AA
BB
CC
Description
M8 x 25 Bolt
M6 x 16 Bolt
Wrench
Quantity
16
4
1
NOTE: Alternative Tools For Assembly (Not Included).
A
C
D
B
Part
A
B
C
D
Description
Cabinet
Cabinet Handle
Fixed Caster
Swivel Caster
Quantity
1
1
2
2
AA BB CC

• Periodically clean the drawer fronts, drawer trim, and other surfaces with a mild detergent and water.
• Auto wax preserves the storage unit's luster finish and protects against scratches. Apply the wax as you would on a car.
• Remove grease and oil with a standard nonflammable cleaning fluid.
1. Removing the Drawers
• Fully extend the empty drawer.
• Push up the one release lever while pulling down
on the other release lever.
• Pull the drawer outward until it is released from
the drawer slide.
1. Caster Maintenance
• Grease the casters annually using high-quality
bearing grease.
2. Drawer maintenance
• Lubricate the drawer slides semi-annually with high-quality
bearing grease
2. Re-inserting the Drawers
• Extend the drawer slides.
• Insert the brackets on each side of the drawer into the slots
in the slides, being careful that they are properly positioned.
• Once properly inserted, completely close the drawer to set
the slides in their proper positions.
Operation
OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. [phone] / Fax. [phone] / Web. www.olympiatools.com
5
Maintenance

CAUTION: Two people are recommended for assembly.
CAUTION: Do not over tighten the bolts.
1. Attaching the Cabinet Handle
• Position the cabinet handle (B) over the holes on the cabinet (A).
• Attach with the bolts (BB) and tighten with supplied wrench (CC) or 10mm wrench/socket.
Assembly
OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. [phone] / Fax. [phone] / Web. www.olympiatools.com
4
NOTE: The holes in the cabinet are tapped and do not require nuts.
2. Attaching the Casters
• Be sure the drawers are locked and lay the cabinet (A) on its top. Used packaging material to protect the finish.
• Attach the swivel casters (D) to the unit, on the same side as the handle, inserting bolts (AA) through the swivel
casters (D) and into the cabinet (A).
• Tighten with supplied wrench (CC) or 12 mm wrench/socket.
• Repeat this process for the fixed casters (C) on the opposite side of the cabinet (A).
• Return the cabinet (A) to its upright position.
A
B
BB

OLYMPIA TOOLS INTERNATIONAL, INC.
Tel. [phone] / Fax. [phone] / Web. www.olympiatools.com
6
Replacement Parts
• For assistance with replacement parts please call Olympia Tools Customer Service: 866-461-8665 (M-F 8am to 5pm PST)
Part
A
B
C
D
E
F
G
H
I
Description
Cabinet Handle
Fixed Caster
Swivel Caster
Lock
Key
Badge
Drawer
Caster Bolt
Handle Bolt
Quantity
1
2
2
1
2
1
4
16
4
A
I
C
D
E
F
H
B
G