Olympus SZ-31MR User manual

Instruction Manual
DIGITAL CAMERA
●Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these
instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for
future reference.
●We recommend that you take test shots to get accustomed to your camera before taking important photographs.
●In the interest of continually improving products, Olympus reserves the right to update or modify information
contained in this manual.
SZ-31MR

2
EN
Checking the contents of the box
Checking the contents of the box
Strap Stylus pen Lithium Ion Battery
(LI-50B)
USB cable
(CB-USB8)
Digital camera
or
Other accessories not shown:
Warranty card
Contents may vary depending
on purchase location. AV cable
(CB-AVC3)
USB-AC adapter
(F-2AC)
OLYMPUS Setup
CD-ROM
Pull the strap tight so that it does not come loose.
Attaching the camera strap
Attaching the camera strap

3
EN
1
2
7
6
5
8
9
10
16
14
15
13
18
17
11
12
3
4
19
20
21
23
22
24
Names of Parts
Names of Parts
Camera unit
1nbutton
2Indicator lamp
3Shutter button
4Zoom lever
5Strap eyelet
6Connector cover
7Multi-connector
8HDMI micro connector
9Battery/card compartment
cover
10 Battery/card compartment
lock
11 Mode dial
12 Flash switch
13 AF illuminator
Self-timer lamp
14 Flash
15 Microphone
16 Speaker
17 Lens
18 Tripod socket
19 Monitor
20 Rbutton (record movies)
21 qbutton (switching between
shooting and playback)
22 Abutton (OK)
23 Wheel controller
INFO button (changing
information display)
Dbutton (erase)
24 mbutton

4
EN
Monitor
Shooting mode display
Shooting mode display
1/100 F3.01/100 F3.0
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
PP
44 00:34
00:34
16 M
Date
N ORM
1080
10111218 1315 141617
27 2526
18
2
1
3
4
5
6
7
8
9
19
21
20
22
23
24
1Flash ...........................p. 19
Flash standby/flash charge
.................................p. 61
2Macro/super macro.....p. 31
3Self-timer.....................p. 31
4Exposure compensation
.................................p. 32
5White balance .............p. 32
6ISO..............................p. 33
7Drive............................p. 33
8Image size (still images)
...........................p. 34, 68
9Recording with sound
(movies) ...................p. 42
10 Image size (movies)
...........................p. 38, 69
11 Remaining recording time
(movies) ...................p. 17
12 Movie recording icon...p. 17
13 Metering ......................p. 39
14 Date stamp..................p. 41
15 Compression (still images)
...........................p. 38, 68
16 Number of storable still
pictures (still images)
...........................p. 16, 68
17 Current memory ..........p. 67
18 Battery check ........p. 13, 62
19 Histogram....................p. 19
20 Image stabilization
(still images)/Digital image
stabilization (movies)
.................................p. 40
21 Touch screen mode
.............................p. 9, 39
22 World time...................p. 54
23 AF target mark ............p. 17
24 Shooting mode......p. 16, 23
25 Aperture value.............p. 17
26 Shutter speed..............p. 17
27 Camera shake warning

5
EN
Playback mode display
Playback mode display
’12/02/26’12/02/26 12:3012:30
16 M
2.02.0F3.0F3.01/10001/1000
AUTO
WB
AUTO
WB
100
ISO
100
ISO
N
ORM
’12/02/26 12:30
1010
3D3D
4/304/30
100-0004100-0004
PP
00:12/00:3400:12/00:34
1010
3D3D
4/304/30
16 M
2.02.0F3.0F3.01/10001/1000
AUTO
WB
AUTO
WB
100
ISO
100
ISO
N
ORM
100-0004100-0004
PP
191817 21 2220
1
27 25 24 23
1 10 11 11 16 76 9843 5 2
1 10 11 76 9843 52
1415 13 12
12
12
1415 13 12 26
Still image Movie
●Advanced display
●Standard display
1Battery check ........p. 13, 62
2Photo with movie clip ..p. 36
33D image.....................p. 35
4Eye-Fi transferred .......p. 48
5Protect.........................p. 47
6Adding sound........p. 42, 44
7Favorite.......................p. 43
8Upload.........................p. 47
9Print reservation/number of
prints ........................p. 58
10 Current memory ..........p. 67
11 Frame number/total number
of images (still images)
.................................p. 20
Elapsed time/total recording
time (movies) ...........p. 21
12 Touch screen mode.......p. 9
13 Date and time........p. 15, 54
14 Viewing favorites.........p. 43
15 Grouped image ...........p. 36
16 Volume..................p. 20, 50
17 ISO..............................p. 33
18 Shutter speed..............p. 17
19 Shooting mode......p. 16, 23
20 Aperture value.............p. 17
21 Histogram....................p. 19
22 Exposure compensation
.................................p. 32
23 Shadow Adjustment
Technology...............p. 38
24 White balance .............p. 32
25 Compression (still images)
...........................p. 38, 68
26 File number
27 Image size
...............p. 34, 38, 68, 69

6
EN
Camera Settings
Using the dial and the direct buttons
Frequently used functions can be accessed using the direct buttons.
Mode dial
Changing the shooting mode (p. 23)
Zoom lever (p. 18, 22)
Shutter button (p. 16, 61)
Rbutton (record movies) (p. 17)
qbutton (switching between
shooting and playback)
(p. 17, 20, 49)
mbutton (p. 8)
H(left)
G(down) /Dbutton (erase) (p. 21)
F(up) /INFO button
(changing information display) (p. 19, 22)
I(right)
Abutton
Wheel controller
The wheel controller can also be
used to change the selections.

7
EN
The FGHI symbols displayed during image selection
and menu navigation indicate the roles played by the
buttons on the wheel controller (p. 6).
X
MENU
Back
Y/M/D
Y M D Time
-- --
:.. 2012 02 26
N
ORM
‘12/02/26 12:30
N
ORM
16 M
‘12/02/26 12:30
MENU
Sel. Image Back
Single Print More
4/30
100-0004
4/30
100-0004
On-screen operation guides indicate the roles played by
the mand Abuttons and zoom lever.
Operation guide
Sel. Image (1)
Erase/Cancel
OK
MENU
4/304/30
MENU
Back
MENU
Camera Menu 1 Back
ResetReset
Compression Normal
Shadow Adjust Auto
Touch Shutter Off
Digital Zoom Off
AF Mode Face/iESP
ESPESP/
Operation guide
Using the Menu
Use the menu to change camera settings.
There may be menus that are unavailable depending on other related settings or the shooting mode.
Function menu
Function menu
Press Hduring shooting to display the function menu. The function menu provides access to frequently used shooting
settings.
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
MENUMENU
16 M
Flash Auto
PP
44
N
O
R
Shooting
Function menu
Selected option
Shooting mode
Setup menu
To select the function menu
Use FG to select a menu and use HI to select a menu option. Press the Abutton to set the function menu.

8
EN
1Press the mbutton.
●The setup menu is displayed.
MENU
Camera Menu 1 Back
ResetReset
Compression Normal
Shadow Adjust Auto
Touch Shutter Off
Digital Zoom Off
AF Mode Face/iESP
ESPESP/
2Press Hto select the page tabs. Use FG to
select the desired page tab and press I.
File Name Reset
MENU
Settings Menu 2 Back
NTSC
English
Off
Power SavePower Save
NTSC/PAL
Pixel Mapping
X
Page tab
File Name
MENU
Settings Menu 2 Back
NTSC
Reset
English
Off
Power SavePower Save
NTSC/PAL
Pixel Mapping
X
Submenu 1
3Use FG to select the desired submenu 1 and
then press the Abutton.
MENU
Settings Menu 2
File Name
Back
Power SavePower Save Off
Pixel Mapping
NTSC/PAL NTSC
Reset
English
X
Power SavePower Save
Pixel Mapping
MENU
Settings Menu 2 Back
File NameFile Name
Reset
NTSC/PAL
X
On
Off
Submenu 2
4Use FG to select the desired submenu 2 and
then press the Abutton.
●Once a setting is selected, the display returns to
the previous screen.
There may be additional operations. “Menu Settings”
(p. 38 to 55)
MENU
Settings Menu 2 Back
File Name
Power SavePower Save On
Pixel Mapping
NTSC/PAL NTSC
Reset
English
X
5Press the mbutton to complete the setting.
Setup menu
Press the mbutton during shooting or playback to display the setup menu. The setup menu provides access to a
variety of camera settings, including options not listed in the function menu, display options, and the time and date.

9
EN
Using the Touch Panel
Use the touch panel by touching the screen with your finger.
●The touch panel can be used for operations marked with ]in this manual.
●Using a screen protector or gloves may cause poor operability.
●Use a stylus pen (supplied) when it is difficult to operate with your finger.
Using for the live guide (p. 23)
Using for the live guide (p. 23)
In Mmode, the live guide can be set
1Touch M.
●Touch an item to set the level.
2Drag the level bar slider vertically to set the
level, and touch N.
●Touch Oto end the live guide.
Clear & Vivid
Flat & Muted
Using for the shooting mode
Using for the shooting mode
By touching the screen, the subject to be focused on can
be set or the picture can be taken.
Every time [is touched, the operation is changed.
●[: The subject that is touched is focused on and
the picture is taken automatically.
●^: The subject that is touched is AF locked.
Press the shutter button to take the picture.
Touch _to release the AF lock. Focus lock ends
when the shutter is released.
16M
44
N ORM
00:3400:34
LIVE
GUIDE
LIVE
GUIDE
1080
Using for the playback mode
Using for the playback mode
The displayed image can be changed or enlarged.
Advancing and rewinding one frame at a time:
Drag the screen to left to advance one frame, and
drag the screen to right to rewind one frame.
’12/02/26’12/02/26 12:3012:30
4/30
4/30
Zoom:
Touch to enlarge the image.
●When the enlarged image is dragged, the
displayed image is also moved.
Index:
Touch `to play back the image in index view.
●Touch the image to play back the image in single-
image view.
00:0000:00’12/02/26’12/02/26
Playback (grouped image, panorama image,
movie, Photo with Movie Clip, sound recorded
with an image):
Touch \.
●Touch Kto expand the grouped images.

10
EN
Menu Index
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
MENUMENU
16 M
Flash Auto
PP
44
N
O
R
7
8
2
6
5
9
MENU
Camera Menu 1 Back
ResetReset
Compression Normal
Shadow Adjust Auto
Touch Shutter Off
Digital Zoom Off
AF Mode Face/iESP
ESPESP/
a
b
c
d
e
0
3
4
f
1
1Shooting mode
P(Program Auto) .............p. 16
M(iAUTO)...................p. 23
.(Photo with Movie Clip)
........................................p. 28
-(Multi Recording) .......p. 29
P(Magic Filter) ..........p. 25
p(Panorama)..................p. 26
Q(Beauty) .................p. 25
s(Scene) ...................p. 24
2Flash.................................p. 19
3Macro ...............................p. 31
4Self-timer ..........................p. 31
5Exposure compensation...p. 32
6White balance...................p. 32
7ISO ...................................p. 33
8Drive .................................p. 33
9Image Size .......................p. 34
0z(Camera Menu 1)........p. 38
Reset
Compression
Shadow Adjust
Touch Shutter
AF Mode
ESP/n
Digital Zoom
az(Camera Menu 2)........p. 40
Image Stabilizer
AF Illuminat.
Rec View
Pic Orientation
Icon Guide
Date Stamp
Super-Res Zoom
bA(Movie Menu) ..............p. 38
Image Size
IS Movie Mode
R(Movie sound recording)
Wind Noise Reduction
cq(Playback Menu) ........p. 43
Slideshow
Favorites
Photo Surfing
Edit
Erase
R(Protect)
Upload Order
dx(Settings Menu 1)..........p.48
Memory Format/Format
Backup
Eye-Fi
Print Order
USB Connection
qPower On
Sound Settings
ex(Settings Menu 2)..........p.50
File Name
Pixel Mapping
s(Monitor)
TV Out
Power Save
l(Language)
X(Date/time)
fx(Settings Menu 3)..........p.54
World Time
Reset Database
Beauty Settings
Touch Calibration

11
EN
Preparing the Camera
Preparing the Camera
Inserting the battery and card
1
2
Insert the battery with the Cmark toward the battery
lock knob.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
2
1
Battery/card compartment lock
Battery/card
compartment cover
Battery lock knob
Write-protect switch
Insert the card straight until it clicks into place.
When using the camera, be sure to close the battery/
card compartment cover.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
Turn off the camera before opening the battery/card
compartment cover.
Always use SD/SDHC/SDXC cards or Eye-Fi card
with this camera. Do not insert other types of memory
cards. “Using the card” (p. 67)
Do not touch the contact area of the card directly.
This camera can be used without a card by storing
images in its internal memory.
3
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
cards” (p. 68, 69)
To remove the card
To remove the card
12
Press the card in until it clicks and comes out slightly,
then remove the card.
2
1

12
EN
Charging the battery with the
included USB-AC adapter
The included F-2AC USB-AC adapter (hereafter
referred to as USB-AC adapter) differs depending
on the region where you purchased the camera. If
you received a plug-in type USB-AC adapter, plug it
directly into AC outlet.
The included USB-AC adapter has been designed to be
used for charging and playback. Do not take pictures
while the AC adapter is connected to the camera.
When charging completes, be sure to unplug the
USB-AC adopter from the outlet.
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
1
Connecting the camera
Connecting the camera
AC outlet
USB cable
(supplied)
Multi-connector
Connector cover
Computer
(on and running)
2
The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 3.5 hours).
If the indicator lamp does not light, the USB-AC
adapter is not connected to the camera correctly,
or the battery, camera, or USB-AC adapter may be
broken.
Indicator lamp
On: Charging
Off: Charged

13
EN
When to charge the batteries
When to charge the batteries
Charge the battery when the error message shown below
appears.
Flashes in red
Battery Empty
Computer Software Installation and
Product Registration
Installation of [ib] computer software is available on
Windows computers only.
Windows
Windows
1Insert the supplied CD in a CD-ROM drive.
Windows XP
●A “Setup” dialog will be displayed.
Windows Vista/Windows 7
●An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
If a “User Account Control” dialog is displayed, click
“Yes” or “Continue”.
2Register your Olympus product.
●Click the “Registration” button and follow the on-
screen instructions.
The camera must be connected to the computer for
user registration. “Connecting the camera” (p. 12)
If nothing is displayed on the camera screen even after
connecting the camera to the computer, the battery
may be exhausted. Leave the camera connected
to the computer until the battery has charged, then
disconnect and reconnect the camera.
3Install OLYMPUS Viewer 2 and [ib] computer
software.
●Check the system requirements before beginning
installation.
●Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
OLYMPUS Viewer 2
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista/ Windows 7
Processor
Pentium 4 1.3 GHz or better
(Core2Duo 2.13GHz or better required
for movies)
RAM 1 GB or more
(2 GB or more recommended)
Free Hard
Drive Space 1 GB or more
Monitor
Settings
1024 x 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)

14
EN
[ib]
Operating
System
Windows XP (Service Pack 2 or later)/
Windows Vista / Windows 7
Processor
Pentium 4 1.3 GHz or better
(Core2Duo 2.13GHz or better required
for movies)
RAM
512 MB or more
(1 GB or more recommended)
(1 GB or more required for movies —
2 GB or more recommended)
Free Hard
Drive Space 1 GB or more
Monitor
Settings
1024 x 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)
Graphics A minimum of 64 MB video RAM with
DirectX 9 or later.
* See online help for information on using the software.
4Install the camera manual.
●Click the “Camera Instruction Manual” button and
follow the on-screen instructions.
Macintosh
Macintosh
1Insert the supplied CD in a CD-ROM drive.
●Double-click the CD (OLYMPUS Setup) icon on
the desktop.
●Double-click the “Setup” icon to display the “Setup”
dialog.
2Install OLYMPUS Viewer 2.
●Check the system requirements before beginning
installation.
●Click the “OLYMPUS Viewer 2” button and follow
the on-screen instructions to install the software.
You can make user registration via “Registration” in
OLYMPUS Viewer 2 “Help”.
OLYMPUS Viewer 2
Operating
System Mac OS X v10.4.11–v10.6
Processor Intel Core Solo/Duo 1.5 GHz or better
RAM 1 GB or more
(2 GB or more recommended)
Free Hard
Drive Space 1 GB or more
Monitor
Settings
1024 x 768 pixels or more
Minimum 32,000 colors
(16,770,000 colors recommended)
* Other languages can be selected from the language
combo box. For information on using the software, see
online help.

15
EN
3Copy the camera manual.
●Click the “Camera Instruction Manual” button to
open the folder containing the camera manuals.
Copy the manual for your language to the
computer.
Language, date, time, and time zone
You can choose the language in which menus and
messages are displayed in the monitor. In addition, the
time and date you enter here appears in a variety of roles,
including in date stamps and the names of the image files
containing pictures taken with the camera.
1After turning the camera on with the n
button, select a language using FGHI and
press the Abutton.
The menus can be used to change the selected
language. [l] (p. 53)
2Use FG to select the year for [Y].
X
MENU
Back
Y/M/D
YMDTime
-- -- -- --
:.. 2012
Date and time setting screen
3Press Ito save the setting for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- -- -- --
:.. 2012
4As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order), and then
press the Abutton.
For precise time setting, press the Abutton as the
time signal strikes 00 seconds.
To change the date and time, adjust the setting from
the menu. [X] (Date/time) (p. 54)
5Use HI to select the [x] time zone and
then press the Abutton.
●Use FG to turn daylight saving time ([Summer])
on or off.
’12.02.26 12:30
Summer
Seoul
Tokyo
The menus can be used to change the selected time
zone. [World Time] (p. 54)

16
EN
]
Shooting with the optimum aperture
value and shutter speed (
P mode)
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
1Set the mode dial to P.
2Press the nbutton to turn on the
camera.
Pmode indicator
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
44
N
ORM
16 M
00:3400:34
1080
Number of storable still pictures (p. 68)
3Hold the camera and compose the shot.
Horizontal grip
Vertical grip
Monitor
When holding the camera, be careful that your
fingers or other objects do not obstruct the flash or
microphone.
4Press the shutter button halfway down to
focus on the subject.
●When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
●The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
Shooting, Playback, and Erasing
Shooting, Playback, and Erasing

17
EN
Shooting movies
1Press the Rbutton to start recording.
RECREC
0:000:00 0:00:340:00:34
720
RECREC
0:000:00 0:00:340:00:34
Displayed in red
during shooting
Recording
time
Continuous
recording length
(p. 69)
Sound is recorded with movies.
The effects for the current shooting mode also apply
to movies. Some shooting mode effects may not
apply to movies.
You can shoot still images during movie recording.
“Shooting still images while recording a movie” (p. 30)
2Press the Rbutton again to stop recording.
PP
1/400 F3.01/400 F3.0
AF target mark
Press halfway
Shutter speed Aperture value
“Focusing” (p. 63)
5To take the picture, gently press the shutter
button all the way down while being careful
not to shake the camera.
1/400 F3.01/400 F3.0
PP
Image review screen
Press fully
To view images during shooting
To view images during shooting
Pressing the qbutton enables playback of images. To
return to shooting, either press the qbutton or press the
shutter button halfway down.
To turn off the camera
To turn off the camera
Press the nbutton again.

18
EN
Using the zoom
Turning the zoom lever adjusts the shooting range.
W side T side
4.64.6
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16 M
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16 M
N
ORM
44
N
ORM
PP PP
10.010.0
Zoom bar
Optical zoom: 24x
Super-Res Zoom: 2x
Digital zoom: 4x
To take larger images
To take larger images
[Digital Zoom]/[Super-Res Zoom]
[Digital Zoom]/[Super-Res Zoom]
The type and amount of zoom can be identified from
the appearance of the zoom bar. The display differs
depending on the options selected for [Digital Zoom]
(p. 40), [Super-Res Zoom] (p. 42), and [Image Size]
(p. 34).
Optical zoom:
Image size Zoom bar
16M
Optical zoom range
Other
The magnification ratio changes
depending on the image size setting.*1
[On] selected for [Super-Res Zoom]:
Image size Zoom bar
16M/16:9 L
Super-resolution zoom range
[On] selected for [Digital Zoom]:
Image size Zoom bar
16M
Digital zoom range
Other
The magnification
ratio changes
depending on the
image size setting.*1
Digital zoom range
*1 If [Image Size] is less than the full resolution, after
reaching the maximum optical zoom, the camera will
automatically resize and crop the image to the selected
[Image Size], then enter the digital zoom range if [Digital
Zoom] is [On].
Photographs taken with the zoom bar displayed in
red may appear “grainy.”

19
EN
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
1Press F(INFO).
●The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 4)
PP
N ORM
PP
PP
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16 M
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16 M
N
ORM
44
0.00.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
16 M
00:3400:34
720
00:3400:34
720
00:3400:34
720
N ORM
PP
44
Normal
Movie information
No information
Detailed
Reading a histogram
Reading a histogram
If the peak fills too much of the frame, the
image will appear mostly white.
If the peak fills too much
of the frame, the image
will appear mostly black.
The green section shows luminance distribution within
the screen’s center.
Using the flash
The flash functions can be selected to best match the
shooting conditions.
1Slide the flash switch to raise the flash.
To turn off the flash
To turn off the flash
Press the flash down back into the camera.
2Select the flash option in the function menu.
0.00.0
MENUMENU
16 M
Flash Auto
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
3Use HI to select the setting option, and
press the Abutton to set.
Option Description
Flash Auto The flash fires automatically in low-light
or backlight conditions.
Redeye Pre-flashes are emitted to reduce the
occurrence of red eye in your photos.
Fill In The flash fires regardless of the
available light.
Flash Off The flash does not fire.

20
EN
]
Viewing images
1Press the q button.
Number of frames/
Total number of images
’12/02/26 12:3012:30
4/30
4/30
’12/02/26
Playback image
2Turn the wheel controller to select an image.
●It can be performed by pressing HI.
Displays
previous
image
Displays next
image
Keep turning the wheel controller to fast forward or
reverse. It can be performed by holding HI.
The display size of the images can be changed.
“Index view and close-up view” (p. 22)
To play sound recordings
To play sound recordings
To play sound recorded with an image, select the image
and press the Abutton.
During audio playback
Press FG to adjust volume.
To play back grouped images
To play back grouped images
Multiple Images are displayed as a group depending on
the shooting conditions. “Playing back grouped images”
(p. 36)
T
’12/02/26’12/02/26 00:0000:00
4/30
4/30
Grouped images
To play back movies
To play back movies
Select a movie, and press the Abutton.
During playbackMovie
’12/02/26’12/02/26 00:0000:00
4/30
4/30
Turn the zoom lever to the T side to display the movie
index. Use FGHI to select the frame to start
playback.
Pausing and
restarting
playback
Press the Abutton to pause playback.
During pause, fast forward or reverse,
press the Abutton to restart playback.
Fast forward Press Ito fast forward. Press Iagain
to increase the fast forward speed.
Rewind
Press Hto rewind. The speed at which
the recording rewinds increases each
time His pressed.
Adjusting
the volume
Turn the wheel controller or use FG to
adjust the volume.