Olympus WS 100 - 64 MB Digital Voice Recorder User manual

U1-BZ8099-02-INST-E1 2005.4.15
sYou can switch the time indication between the 12-hour system and the 24-hour system by pressing the
FOLDER/MENU button while you are setting the hour or minute.
sYou can change the order of the date indication by pressing the FOLDER/MENU button while you are
setting the year, month, or day.
(Example: February 14, 2005)
- 2 - - 4 -- 5 -
4Hold
Setting the HOLD switch to the HOLD
position.
All operation buttons are disabled. This
feature is useful when the recorder has
to be carried in a handbag or pocket.
Remember to reset the HOLD switch
when using the recorder.
Notes
sThe recorder functions as follows with
the HOLD switch set to the HOLD
position:
– If the recorder is playing, the display
goes dark when playback of the
current file has completed.
– If the recorder is recording, the
display goes dark when the recorder
stops recording automatically upon
running out of free memory.
U1-BZ8099-02
AP0504
Current folder
- 3 -
4To Pause Recording
To Pause
Press the REC button during recording.
➥“PAUSE” appears on the display and the recording/playing lamp
flashes.
To Resume Recording
Press the REC button again.
➥Recording will resume at the point of interruption.
Notes
sIf “FULL” appears on the display, you cannot record. In such a case, erase unnecessary files or download
to PC.
sIf the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations.
Put a notebook or other item between the table and the recorder for clearer recording.
sEven if you press the FOLDER/MENU button, the display will not change to current recording time if the
remaining recording time is 5 minutes or less.
sA beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds
while recording.
sWhen remaining recording time is less than 60 seconds, the recording/playing display lamp starts flashing
in red. When the recording time is decreasing to 30 or 10 seconds, the lamp flashes faster.
sThe recorder will enter Stop mode if it has been left paused for 60 minutes or longer.
sIn case of difficult acoustic conditions or low speaker’s voice, recording in HQ or HQ is recommended.
Also, usage of an external microphone (sold separately) could improve the quality of recordings.
sThe input level cannot be adjusted on this recorder. When you connect the recorder to an external
device, execute a test recording and adjust the output level of the external device.
1
Lightly press down on the
arrow and slide the battery
cover open.
2
Insert size-AAA alkaline battery,
observing the correct polarity.
3
Close the battery cover completely
by pressing to the direction A,
then sliding to the direction B.
Time/Date screen appears. The hour
indicator flashes, indicating the start of the
Time/Date setup process. (See “Setting
Time/Date (TIME)” for details)
An optional Ni-MH Rechargeable battery (BR401) from Olympus can be used for the recorder.
Replacing the Battery
When appears on the display, replace the battery as soon as possible. Size-AAA
alkaline battery is recommended. When the battery is depleted, appears on the
display, and the recorder shuts off.
sWhen replacing the battery, make sure that you turn the POWER switch OFF before replacing them.
sIf it takes longer than 15 minutes to replace the dead battery, you may have to reset the time when you
load a fresh battery.
4Inserting a Battery
1
Press and hold the MENU
button for 1 second or longer.
2
Press the FF or REW button
until “TIME” flashes on the
display.
3
Press the PLAY button.
The hour indicator flashes.
4
Press the FF or REW button
to set the hour.
5
Press the PLAY button to
select the minute.
The minute indicator flashes.
6
Press the FF or REW button to
set the minute.
Repeat steps 5 and 6 to continue to set
the year, month and date in the same way.
7
After setting the date, press
the PLAY button.
This completes the time/date setup
procedure.
4Setting Time/Date (TIME)
If you have set the time and date, information as to when a sound file was recorded is
stored automatically with that file.
When using the recorder for the first time, or after the battery has been taken out for a
log period of time, the hour indication will flash. In such a case, be sure to set the time
and date by following steps 4 through 7 described below.
4Notes on the Folders
The recorder provides five folders, A, B, C, D and E.
To change the folder selection, press the FOLDER button while the
recorder is stopped. Each recorded file is stored in a folder. Using folders
to classify files makes it convenient to find files you want to access
later. Up to 199 messages can be recorded per folder.
4
Recording from External Microphone or Other Devices
The external microphone and other devices can be connected and the
sound can be recorded.
sWhen the external microphone is connected to the microphone jack of the
recorder, the built-in microphone will not operate.
sWhen connecting an external microphone or other external equipment to the
microphone jack, choose adequate equipment, such as a mono microphone (optional).
- 1 -
4How to Use the Strap
4Power Supply
Power on…Turn the POWER switch ON.
If the POWER switch on the backside of this recorder is
turned OFF, it is not possible to use any of the functions.
Turn the POWER switch ON before operation.
Power off…Turn the POWER switch OFF.
Standby Mode and Display Shut Off
If the recorder is stopped for 5 minutes or longer during recording or playing, it goes into
Standby (power-save) mode, and the display shuts off. To exit Standby mode and turn on
the display, press any button.
Earphone jack
Microphone jack
Strap hole
4LCD Display Information
You can select an option for the display of the recorder. This help review and confirm different
recorder settings and file information.
RecordingGetting Started Playing Back
AB
1
Press the FOLDER button to
choose folder.
2
Press the FF or REW button
to choose the file that you
want to play.
3
Press the PLAY button to
start playback.
The recording/playing lamp turns green, and the
elapsed playing time is indicated on the display.
4
Press the VOL (+) or VOL (–)
button to select the proper
sound volume.
The display shows the volume level. You
can choose between 0 to 30.
1
Press the FOLDER button to
choose a folder.
2
Press the REC button to start
recording.
The recording/playing lamp turns red, and
recording starts.
sIf you start recording after inserting the
earphone into the earphone jack on the
recorder, you can hear the sound being
recorded. The sound volume on the recording
monitor can be adjusted by pressing the VOL
(+) or VOL (–) button.
3
Press the STOP button to
stop recording.
New recordings are saved as the last file
in the folder.
4Identification of Parts
POWER switch
b
c
d
a
e
aCurrent folder
bCurrent recording
mode
cCurrent file number
dRecording time
eRemaining recording
time (REMAIN)
a
b
To audio input
terminal of
other devices
aCurrent file number
bPlaying time
DIGITAL VOICE RECORDER
WS-100/WS-200S
EN
INSTRUCTIONS
Thank you for purchasing an Olympus
Digital Voice Recorder.
Please read these instructions for information
about using the product correctly and safely.
Keep the instructions handy for future reference.
To ensure successful recordings, we recommend that
you test the record function and volume before use.
Recording/playing lamp
Display (LCD panel)
FOLDER/MENU button
ERASE button
INDEX button
Built-in speaker
Battery cover
Built-in Microphone*
REC (Record) button
STOP button
PLAY button
FF (Fast Forward) button
REW (Rewind) button
VOL (+) button
VOL (–) button
4Canceling Playback
To Stop
Press the STOP button.
➥The recorder stops in the middle of the file being played.
To Resume Playback
Press the PLAY button again.
➥Playback will resume at the point of interruption.
sThe recorder stops when it reaches the end of the file. Continue pressing the FF button to proceed with the
cue from the beginning of the next file.
sThe recorder stops when it reaches the beginning of the file. Continue pressing the REW button to proceed
with the review from the end of the previous file.
sWhen the index mark is shown in the middle of a file, it will stop temporarily in the position of the index mark.
4Changing Playing Speed
You can change the playing speed by pressing the PLAY button while
the recorder is playing back.
sWhen the slow playback mode is selected, the “S.PLAY”appears and, for the fast playback mode,
“F.PLAY”appears on the display while the recorder is playing back.
sThe recorder stops playing when you press the STOP button while playing back in the slow/fast mode,
or when it reaches to the end of the file. If you once press the STOP button and start playback again,
the recorder will play back files in normal speed as well.
4Locating the Beginning of the File
While the recorder is playing back, pressing the FF or REW button forwards or rewinds to
the beginning of the previous or next file respectively. If an index mark is encountered
midway, playback begins at that point. (See “Index Marks”for details)
4Listening with Earphones
You can listen to files by connecting earphones to the earphone jack.
If an earphone is connected, the speaker doesn't emit sound.
When connecting stereo earphones, the playback will be in stereo. (Only
when playing back stereo files.)
sTo avoid irritation to the ear, insert the earphone after turn down the volume level.
sWhen you listen with the earphone during playback, do not raise the volume too
much. It may cause hearing impairment and decrease in hearing ability.
4Forwarding and Rewinding
Fast Forward
Press and hold the FF button while playing a file.
➥When you release the FF button, the recorder will resume
normal playback.
Rewind
Press and hold the REW button while playing a file.
➥When you release the REW button, the recorder will resume
normal playback.
Normal speed Slow playback
(-25%)
Fast playback
(+50%)
sThe battery compartment can be detached from the main unit.
sThe main unit can be connected to a PC USB port or a USB hub.
Note
Under no circumstances insert any other parts than the main unit into the battery compartment. This may
result in battery leakage, overheating, fire or explosion.
State of the
recorder
While in stop
mode
While in
record mode
While in
playback mode
Operation
Press and hold
the STOP button
Press the FOLDER/
MENU button
Press the FOLDER/
MENU button
Display
While holding the button down, the number of all files
lights up and the remaining recording time and the
remaining memory space are displayed by turns.
The display switches between current recording time and
remaining recording time.
Playing time →Remaining playing time →Recording date
of the file →Recording time of the file →Playing time . . .
*The microphone built in the
WS100 is located only on one
side, and the sound will be
recorded with mono.
Battery compartment
USB terminal
Main unit
For customers in North and South America
USA RFI
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian RFI
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the Canadian Depart-
ment of Communications.
Cet appareil numérique ne dépasse pas les limites de Catégorie B pour les émissions de
bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur
l’Interférence Radio du Département Canadien des Communications.
For customers in Europe
“CE”mark indicates that this product complies with the European
requirements for safety, health, environment and customer protection.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection
of waste electrical and electronic equipment in the EU countries. Please do not throw
the equipment into the domestic refuse. Please use the return and collection systems
available in your country for the disposal of this product.
Applicable Product : WS-100/WS-200S

U1-BZ8099-02-INST-E1 2005.4.15
- 6 -- 7 -- 8 -- 9 -- 10 -
Erase
sThe recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected
item is not applied.
sIf you press the STOP or REC button during a menu setup operation, the recorder will stop and apply
the items that were set to that point.
1
Press the FOLDER button
to choose a folder.
2
Press the FF or REW button
to choose the file you want
to erase.
3
Press the ERASE button for
less than 3 seconds.
The “ERASE”indicator flashes.
4
Press the ERASE button
again.
“DONE”blinks for two seconds and
the deletion will be complete.
4Erasing
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
Erasing One File at a Time
1
Press the FOLDER button
to choose a folder.
2
Press and hold the ERASE
button for 3 seconds or
longer.
The “ERASE”indicator flashes.
3
Press the ERASE button
again.
“DONE”blinks for two seconds and
the deletion will be complete.
Erase All Files from a Folder
4Formatting the Recorder (FORMAT)
If you format the recorder, all function settings will return to their defaults.
All files stored in the recorder will be deleted.
If you have important files that you want to save, connect the recorder to a computer and
transfer those files from the recorder to the computer before formatting the device.
1Press the MENU button.
2Press the FF or REW button to choose “FORMAT”.
3When the PLAY button is pressed, “nO”is displayed.
4Press FF or REW to select “yES”, and press the
PLAY button.
After “ARE yOU SURE”is displayed, “nO”will be displayed.
5Press FF or REW to select “yES”, and press the
PLAY button.
“DONE”displays when formatting ends.
sIt may take up to several tens of seconds to finish the initialization. Do not remove the battery or detach
the battery compartment from the recorder during that time. Otherwise data may be damaged.
sNever format the recorder from a PC.
sWhen the recorder is formatted, all the stored data, including locked files, are erased.
Other Functions
sThe recording time shown above is for one continuous file. The available recording time may be shorter
than specified if several files are recorded. (Use the remaining time and recorded time only as references.)
sHQ is only available for the WS-200S.
4Recording Modes (MOdE)
The recording mode can be chosen from HQ (stereo high quality
sound recording) and HQ (high quality sound recording), SP (standard
recording), and LP (long-term recording).
In Menu mode selection... HQ, HQ, SP, LP
Current recording mode
Notes
sAn erased file cannot be restored.
sThe file set to erase lock will not be erased.
sIf operation is not executed for 8 seconds during the setting, it will return to the stop
status.
sCompletion of erasing may take several tens of seconds. Do not remove the battery or
detach the battery compartment from the recorder during in that time. Otherwise data
may be damaged.
4Connecting to Your PC
Apart from using this unit as a recorder, you can use it as an external memory for your
computer, as a storage device.
sYou can save the voice files recorded with this recorder on your PC as back-up.
sYou can save images, text data, etc. on this recorder.
sThe recorder will record in WMA (Windows Media Audio) format.
sThe audio files recorded by this recorder can be played back on your computer using Windows Media
Player. You can also transfer the WMA files downloaded with Windows Media Player to your recorder
and enjoy them (excluding files with copyright protection).
Notes
sNEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data
will be destroyed.
sBe sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
sRefer to the user's manual for your PC regarding the USB port or USB hub on your PC.
sUse the supplied USB extension cable depending on situations.
PC: IBM PC/AT compatible PC
Operating System: Microsoft Windows Me/ 2000 Professional/XP Professional,Home Edition
USB port: One free port
1Before you detach the recorder, turn the
POWER switch OFF and make sure that the
display is turned off.
If you detach the recorder before the display is turned off,
data may be damaged.
2Connect the recorder’s USB terminal to a PC USB port
or USB hub.
While connecting to the PC, “PC”is displayed blinking.
Once “PC LINK”is displayed, you can save or read the data.
While transmitting data, “bUSy”is displayed, and the recording/
playing lamp flashes.
3Transfer the audio files to your computer.
Connect the recorder to your computer and launch Explorer. The
recorder will be recognized as a removable disk.
Each of the five folders is named as DSS_FLDA, B, C, D and E.
The audio files are saved in these folders.
All the audio files recorded by this recorder will be in .WMA format.
( i.e. V_200001.WMA)
You can copy them to any folder on your computer. Double click
the audio file, and Windows Media Player will be launched and
start playing back.
If you are using Windows 2000, Windows Media Player must be
installed on the PC.
4Before you detach the recorder from the PC, carry out
“Remove Removable Media Device”and make sure
that the display is turned off.
Using the recorder on your PC
1
Press and hold the MENU
button for 1 second or longer
while the recorder is stopped.
2
Press the FF or REW button
to select what you would like
to set up.
3
Press the PLAY button to
select the item to be set up.
4
Use the FF or REW button to
change the setting.
5
Press the PLAY button to
confirm the setting.
6
Press the STOP button to
close the menu.
4Basic Operation of the Menu Mode
Using the menu function, you can change various settings according to your preference.
Erase lock indicator
Menu
➜
4Locking Files (LOCK)
Locking a file keeps important data from being accidentally erased.
Locked files are not erased when you choose to erase all files from a folder.
In Menu mode selection... On, OFF
On: Locks the file and prevents it from being erased.
OFF: Unlocks the file and allows it to be erased.
When the microphone senses that sounds have reached a preset
volume, the built-in Variable Control Voice Actuator (VCVA) starts
recording automatically, and stops it when the volume drops.
Particularly helpful for extended recording, the VCVA not only conserves
memory by turning off recording during silent periods, but also makes
playback more efficient and convenient.
In Menu mode selection... On, OFF
sUsing the FF and REW buttons, the VCVA level can be adjusted in 15 levels.
s The recording/playing lamp is lit during recording. When the recorder is in Standby
mode, the recording/playing lamp flashes and “VCVA”flashes on the display.
VCVA indicator
4Index Marks
Index marks can be placed in a file during recording or playback to provide and quick and
easy way of keeping track of important sections in the file.
1Press the INDEX button during recording (pause recording) or playback to set
an index mark.
An index number appears on the display.
Clearing an Index Mark
Press the ERASE button while the index number appears on the display.
sUp to 16 index marks can be set in a file.
sSequential index marks numbers are reassigned automatically.
sIndex marks cannot be set or cleared in a locked file.
sIndex marks can be placed only on to the files recorded by this recorder or Olympus IC recorder.
4Display (LCD panel)
17
8
9
0
2
3
5
4
6
1Folder indicator
2Record mode indicator
3Microphone sensitivity display
4VCVA (Variable Control Voice Actuator) indicator
5Erase lock indicator
6Current time/date, recording date (REC DATE), remaining
recording time (REMAIN), menu display, file length
7Battery indicator
8Index indicator
9Stereo display
0Current file number
4Microphone Sensitivity (MIC)
Microphone sensitivity is adjustable to meet your recording needs.
In Menu mode selection... HI, LO
HI: High-sensitivity mode that records sounds in all directions.
LO: Low-sensitivity mode suited for dictation.
sTo ensure successful recording, make a test recording to choose appropriate
microphone sensitivity before recording.
sIf you choose “HI”, we recommend setting the recording mode to HQ or
HQ to best take advantage of the higher sensitivity.
sIf you choose “HI”, background noise may be high depending on the recording conditions.
Microphone
sensitivity display
4Menu List
HQ
SP
HI
LO
OFF AM/PM
On
nO
yES
OFF
On
On
OFF
OFF
On
LP
HQ
➜: Press the FF or REW button./➞: Press the PLAY button./■: Initial setting
4Continuous Playback (All PLAY)
This function allows you to listen to all your recordings of one folder in
one go without any stop between the files.
In Menu mode selection... On, OFF
On: Continuous playback.
OFF: Returns to normal playback mode.
sAfter the last file in the folder plays, “END”appears on the screen and playback
stops automatically.
4System Sounds (bEEP)
The recorder beeps to alert you to button operations or warn you of
errors. System sounds may be turned off.
In Menu mode selection... On, OFF
Month/Day/Year
File to be erased
Folder to be erased
For safe And Correct Usage
•Do not leave the recorder in hot, humid locations such as inside a closed automobile
under direct sunlight or on the beach in the summer.
•Do not store the recorder in places exposed to excessive moisture or dust.
•Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
•Do not place the recorder on top of or near electric appliances such as TVs or refrigerators.
•Avoid sand or dirt. These can cause irreparable damage.
•Avoid strong vibrations or shocks.
•Do not disassemble, repair or modify the unit yourself.
•Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart).
•Keep the unit out of the reach of children.
Batteries
Warning
•Under no circumstances insert any other parts than the main unit into the battery compart-
ment. This may result in battery leakage, overheating, fire or explosion.
•Batteries should never be exposed to flame, heated, short-circuited or disassembled.
•Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.
•Never use any battery with a torn or cracked outer cover.
•Keep batteries out of the reach of children.
•If you notice anything unusual when using this product such as abnormal noise, heat,
smoke, or a burning odor:
1remove the batteries immediately while being careful not to burn yourself, and;
2call your dealer or local Olympus representative for servicing.
Troubleshooting
Q1 Nothing happens when a button is pressed.
A1 •The HOLD switch may be set to HOLD.
•The batteries may be depleted.
•The batteries may be inserted incorrectly.
Q2 No sound or quiet sound is heard from the speaker while playing back.
A2 •The earphone plug may be plugged into the recorder.
•The volume may be set to the minimum level.
Q3 Recording is not possible.
A3 By pressing the STOP button repeatedly while the recorder stops, check if the
display shows:
• The remaining recording time in the selected folder may have reached“00:00”.
•The number of files is 199.
Check if the display shows “FULL”by pressing the REC button.
Q4 The playback speed is too fast (slow).
A4 The recorder may be set to Fast (slow) Playback.
Specifications
Recording medium: Built-in flash memory
Recording time: WS-200S: 128 MB
HQ mode: Approx. 4 hours 20 minutes
HQ mode: Approx. 8 hours 50 minutes
SP mode: Approx. 17 hours 25 minutes
LP mode: Approx. 54 hours 50 minutes
WS-100: 64 MB
HQ mode: Approx. 4 hours 20 minutes
SP mode: Approx. 8 hours 40 minutes
LP mode: Approx. 27 hours 20 minutes
Microphone: Electret Condenser Microphone (monaural)
Speaker: Built-in ø16 mm round dynamic speaker
Maximum power: 100 mW
Earphone jack (stereo): ø3.5 mm diameter, impedance 8 Ω
Microphone jack: ø3.5 mm diameter, impedance 2 kΩ
(WS-200S: stereo)
(WS-100: monaural)
Power supply: AAA (LR03 or R03) battery or
Ni-MH rechargeable battery
Continuous battery use time (LP): Alkaline battery: Approx. 13 hours
Ni-MH rechargeable battery: Approx. 12 hours
Dimensions: 94 (L) ×40 (W) ×15.1 (T) mm
Weight: WS-200S: 54 g (including battery)
WS-100: 54 g (including battery)
* Battery life is measured by Olympus. It varies greatly according to the type of batteries
used and the conditions of use.
* Your recorded contents are for your personal use or pleasure only. It is prohibited to record
copyrighted material without permission of the copyright holders according to copyright law.
* Specifications and design are subject to change without notice for improvement of performance.
Accessories (Optional)
Ni-MH Rechargeable Battery Charger: BU-400 (Europe only)
Ni-MH Rechargeable Battery: BR401
Connecting cord (Earphone jack ↔Microphone jack): KA333
Stereo microphone: ME51S (for WS-200S)
Noise Cancellation monaural microphone: ME12
Electret condenser microphone: ME15
Telephone pickup: TP7
sHQ is only available for the WS-200S.
sWS-200S is set to HQ by default.
sWS-100 is set to HQ by default.
4Using The Variable Control Voice Actuator (VCVA)
➜
The support service will not cover if your PC has been updated from Windows 95 or 98 to Windows Me/
2000/XP. Any failure on a self-modified PC will not be covered under the operational warranty.
General Precautions
Read this manual carefully to ensure that you know how to operate it safely and correctly.
Keep this manual in an easily accessible location for future reference.
•The warning symbols indicate important safety related information. To protect yourself and oth-
ers from personal injury or damage to property, it is essential that you always read the warnings
and information provided.
Warning regarding data loss
Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction,
or during repair work. For important recorded content, we recommend you to write it down some-
where or make a back-up by downloading to a PC.
HQ HQ SP LP
WS-200S
WS-100
Model Mode
Approx.4 hours 20 minutes Approx.8 hours 50 minutes Approx.17 hours 25 minutes Approx.54 hours 50 minutes
Approx.27 hours 20 minutes Approx.8 hours 40 minutes Approx.4 hours 20 minutes
USB terminal