Omega OBMF266FI User manual

Instruction Manual
Bottom Mount Fridge Freezer
Fully Integrated 266L
OBMF266FI

2
Thank you for purchasing an Omega appliance
Tailored for the modern aesthetic and lifestyle of busy people, your new Omega Appliance will make a
welcome addition to the family.
Omega caters to style-savvy customers who look for balance between stunning form and clever function.
This means a combination of sleek, chic, sophisticated design yet effortless functionality.
And we source from the best. The best craftsmanship. The best innovation. From the best international
design-houses.
All brought together under an appliance that stands for design-led balance.
Please take the time to read through the following instruction manual to familiarise yourself with the
installation, operation requirements and maintenance to ensure optimum performance.
Further Information
For important information about your Omega Appliance such as warranty registration, manuals, features,
and specifications please visit omegaappliances.com.au (if you are in Australia) and
omegaappliances.co.nz (if you are in New Zealand) or contact our Customer Care team on the below email
or phone numbers.
Registering Your Warranty
For peace of mind you can register your warranty at omegaappliances.com.au. Further information on the
Warranty can be found at the end of this manual.
Contact Us
Our customer service team is here to help you with any question or concern.
Both teams are on call Monday to Friday 8.30am to 5.00pm and of course you can always send an email at
your convenience.
Australia Contact Details
Monday to Friday 8.30am –5.00pm
Email: [e-mail]
Phone: [phone]
New Zealand Contact Details
Monday to Friday 8.30am –5.00pm
Email: [e-mail]
Phone: [phone]
To stay up to date and find simple and easy recipes, follow us on our socials:
facebook.com/omegaappliances
instagram.com/omegaappliances_aus

3
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE AP P LIAN CE.
It is important that you retain these instructions, proof of purchase as well as other important documents about
this product for future reference.
The manufacturer will not be responsible for any damage to property or to persons caused by incorrect
installation or improper use of the appliance.
Due to continual product development, Omega reserves the right to alter specifications and appearances without
notice.
Contents
Important Safety Warnings.............................................................................................................................................. 4
Warnings for Disposal………………………………………………………………………………………………………………………………………………...5
Installation Instruction ..................................................................................................................................................... 6
Operation Instruction..................................................................................................................................................... 13
Care and Maintenance ................................................................................................................................................... 15
Trouble Shooting ............................................................................................................................................................ 16
New Zealand Product Warranty Statements of Standard Warranty Conditions......................................................... 17
Disposal Information
Most of the packaging materials are recyclable. Please dispose of these materials through your local recycling
depot or by placing them into appropriate collection containers.
If you wish to discard this product, please contact your local authorities and ask for the correct method of
disposal.

4
Important Safety Warnings
Read the safety precautions and assembly instruction section of this booklet carefully before removing the contents of
this carton.
1. This appliance is not to be use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
2. The appliance must be disconnected from the source of electrical supply before attempting the installation of
accessory.
3. WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
4. WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than
those recommended by the manufacturer.
5. WARNING: Do not damage the refrigerant circuit.
6. WARNING: Do not use electrical appliances inside the food storage compartments of the appliance.
7. When disposing of this appliance, please do so according to local regulations as it contains flammable gas and
refrigerant.
8. Do not store explosive substances such as aerosol cans with flammable propellant in this appliance. Do not
modify this appliance.
9. This appliance is intended to be used in household and similar applications such as:
-Staff kitchen areas in shops, offices and other working environment.
-Farm house.
-By clients in hotels, motels and other residential type environments.
-Bed and breakfast type environments.
-Areas for communal use in blocks of flats or in launderettes.
10. WARNING: Power plug must be accessible after installation.
11. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or a
similarly qualified person in order to avoid a hazard.
12. Follow the installation requirements in this manual. Avoid prolonged exposure to direct sunlight.
13. When positioning the appliance, ensure the supply cord is not trapped or damaged.
14. Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
15. This appliance must be correctly installed by a suitably qualified person, strictly in accordance with the
manufacturer’s instructions. Please see the specific section of this booklet that refers to installation.
16. Do not place hot items on plastic areas of appliance. Do not refreeze food once defrosted. Store pre‐packed
frozen food in accordance to the manufactures instructions. Take care when freezing liquids as sealed
containers can explode under pressure.
17. The refrigerant isobutene (R600a) contained within the refrigerant circuit of the appliance is a natural gas with a
high level of environmental compatibility, which is nevertheless flammable.
18. During transportation, installation and servicing of the appliance ensure that none of the components of the
refrigerant circuit are damaged.
19. Avoid open flames and sources of ignition.
WARNING: Risk of fire / flammable materials

5
Warnings for Disposal
Refrigerant and cyclopentane foaming material used for the refrigerator are flammable. Therefore when the
refrigerator is scraped, it shall be kept away from any fire source and be recovered by a special recovering
company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the
environment or any other harm.
When the refrigerator is scraped, disassemble the doors, and remove gasket of door and shelves, put the doors
and shelves in a proper place, so as to prevent trapping hazard.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

6
Installation Instruction
Unpacking the appliance
Before use, remove all packing materials, including bottom cushions, foam pads and tapes inside of the
refrigerator; tear off the protective film on the doors and the refrigerator body.
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery places to prevent
rust or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with
water so as not to affect the electrical insulation properties of the refrigerator.
The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and sturdy.
Product Details
NOTE: Information in the Instruction Manual is only for reference. The physical product may differ. Before installation
and adjusting of accessories, it shall be ensured that the refrigerator is disconnected from power.
Electrical Details
Rated Voltage/Frequency
220~240V/50Hz
Rated Defrost Power (W)
180（230V）
Rated Current (A)
0.8
Refrigerant
R600a
Insulation Blow Gas
Cyclopentane
Energy Efficiency Class
2 stars

7
Adjusting the door opening
1. Power off the refrigerator, and remove all objects from the door trays.
2. Remove the upper hinge and hole caps of refrigerator door.
3. Remove the refrigerator door, the bottom hinge and the hole cover.

8
4. Exchange the R:bottom hinge and R:upper hinge , then install them according to below steps, and install the top
hole caps. Remove the two fixed blocks of refrigerator door and rotate them for 180° and install them on other side
of refrigerator door.
5. Remove the upper hinge of freezer door.
6. Remove the freezer door, the bottom hinge and the hole caps.
7. Exchange the F: bottom hinge and F: upper hinge, then install them according to below steps, and install the top
hole cover and lower hole caps.
8. Remove the two fixed blocks of freezer door and rotate them for 180° and install them on other side of freezer
door

9
9. The unit will look like below after above 8 steps.
Note: Pictures shown above are for reference only, actual configuration may differ.

10
Cabinet size requirements
Installation
Push the refrigerator into the cabinet and adjust it to make sure the edge fold of top baffle completely touch
the top edge of the cabinet, and the limit hook of supporting leg completely touch the bottom edge of the
cabinet.

11
Fix the supporting leg with screws, then install the screw caps.
Fix the top baffle to the top of the cabinet inner with screws, then install the screw caps.
Open the lower door of cabinet the maximum angle, and open the lower door of the refrigerator to the
corresponding position. Sliding the block to make sure inner edge align with the lower door edge of
refrigerator, then fix the block to the door of cabinet with screw and install screw caps. Fix the upper
refrigerator door to the cabinet door in the same way.

12
Take out the sealing strip from accessory bag, and press it in the gap between the cabinet and the
refrigerator. Installation is completed.
Remove the decorative cover on the left side of the beam in the refrigerator and take out the middle beam
fixing block, screws and plastic inserts in the attachment. Then insert the plastic inserts into two upper holes of
the middle beam (or the lower holes), and then fix the middle beam fixing block to two lower holes (or the
upper holes) of the middle beam with screws, When the screw is half tightened, move the fixing block to the
cabinet and tighten the screws. Finally, tighten the fixing block on the cabinet with the small screws. The
installation is completed. (This item is optional for the middle beam fixing block)
•WARNING: Power plug or switch must be accessible after installation.

13
Operation Instruction
Changing light lamp
Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or
similar qualified person.
Using your appliance
Before initial start, keep the refrigerator still for half an hour before connecting it to power supply.
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for above 4 hours in
summer when the ambient temperature is high.
Ensure enough space for convenient opening of the doors and drawers.
Energy saving tips
The appliance should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the
compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance. This cuts down
on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners interfere
with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.
Functions and Display
Key A: Set key (Temperature setting button of refrigerator
compartment)
Display Screen:
Display:
-Once initially powered on, the display screen is on full display
for 3s, and then the refrigerator runs according to setting 3.
-Normal operation display
In case of a failure, the corresponding LED blinks.
In case of no failures, it shows the actual temperature setting of
refrigerator. Note: Above picture is for reference only

14
Temperature Setting
Each time the temperature setting button A is pressed once, the temperature setting changes one time.
After the temperature setting has been completed, the refrigerator will run according to the set value after 30s.
The shift regulation is:
Lock/Unlock
When the temperature control panel is in lock mode, it needs to long press temperature setting key for 3
seconds for unlocking the panel; all LEDs will blink for 2 second when panel is unlocked.
When the temperature control panel is in unlock state, if there is no operation on control panel within 30
seconds, it will enter into lock state automatically.
Power off function
Entry mode: In the unlocking state, set the key SET for 10s (when the display and control of the refrigerator
are all off, the SET button will take effect when the key is released). After 30s, the refrigerator will enter the
power off function mode, all loads are turned off, and the display and control of the refrigerator will be all off the
power off mode.
Exit mode: In power off mode, press the SET key to exit the power off mode and the refrigerator will return to
normal control.

15
Care and Maintainence
General cleaning
Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and
energy saving.
Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth
dampened with soapy water or diluted detergent.
The interior of the refrigerator should be cleaned regularly to avoid odor.
Please turn off the power before cleaning interior, remove all foods, drinks ,shelves, drawers, etc.
Use a soft cloth or sponge to clean the inside of the refrigerator, with two tablespoons of baking soda and a
quart of warm water. Then rinse with water and wipe clean. After cleaning, open the door and let it dry naturally
before turning on the power.
For areas that are difficult to clean in the refrigerator (such as narrow sandwiches, gaps or corners), it is
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined with some
auxiliary tools (such as thin sticks) to ensure no contaminants or bacterial accumulation in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior of the
refrigerator or contaminated food.
Clean the bottle frame, shelves and drawers with a soft cloth dampened with soapy water or diluted detergent.
Dry with a soft cloth or dry naturally.
Wipe the outer surface of the refrigerator with a soft cloth dampened with soapy water, detergent, etc., and
then wipe dry.
Do not use hard brushes, clean steel balls, wire brushes, abrasives (such as toothpastes), organic solvents
(such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may damage the fridge
surface and interior. Boiling water and organic solvents such as benzene may deform or damage plastic parts.
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect electrical
insulation after immersion.
Defrosting
This refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed
due to change of season or temperature may also be manually removed by disconnection of the appliance from power
supply or by wiping with a dry towel.
Please unplug the refrigerator for defrost and cleaning.

16
Trouble Shooting
You may try to solve the following simple problems by yourself. If they cannot be solved, please contact customer
service.

17
New Zealand Product Warranty Statements of Standard Warranty Conditions
Nothing herein contained shall be construed in any way as
excluding or limiting your rights under the Consumer
Guarantee Act 1993. OUR WARRANTY
This product is also covered by the manufacturer's warranty
set out in this document (Our Warranty).
Our Warranty is for a period of forty eight (48) months from
the date of purchase.
This is in addition to (and does not exclude, restrict or
modify) any rights or remedies to which you may already be
entitled to under the New Zealand Consumer Guarantee act
1993 relating to this product.
Our warranty (which is subject to the conditions below)
covers rectification free of charge of any fault arising from
defective materials or components or faulty workmanship.
The product will be repaired or replaced at the option of
Omega.
Our warranty is subject to the following conditions:
1. That the purchaser contacts Omega prior to any product
repair.
2. That the purchaser carefully follows all instructions
provided with the product and complies with all relevant
electrical & plumbing regulations when installing the
product.
3. That the purchaser carefully follows the instructions
provided in the owner's handbook relating to the proper
use and care of the product and does not use the
product for any purpose other than the DOMESTIC use
for which it has been designed.
WHAT IS COVERED: By Our Warranty
During the warranty period, Omega or its authorised Service
Centre will, at no extra charge, if your appliance is readily
accessible without the need of special equipment and subject
to the terms and conditions of this warranty, repair or replace
any parts which it considers defective.
WHAT IS NOT COVERED: By Our Warranty
1. Products installed damaged or incomplete or not in
compliance with the relevant electrical & plumbing
regulations in their State.
2. Normal wear and tear e.g. cleaning, light globes, filters
etc.
3. Failure resulting from power surges and electrical
storms.
4. Insect or vermin infestation.
5. Unauthorised repairs or use of non- genuine Omega
parts.
6. Any failure caused by the product not being used in
accordance with the instruction and the installation
manual provided with the product.
7. Misuse or abuse, including failure to properly maintain or
service.
8. The clearing of blockages in pumps and hoses.
9. Damage which occurs during delivery or installation.
10. Claims to product surface coating due to liquid or solid
spill-overs, accidental damage or damage caused from
cleaning products not recommended by Omega.
HOW TO CLAIM YOUR WARRANTY
Please refer to our website address below for Omega to
register your warranty online.
If you are contacting Omega regarding any warranty claims
and spare parts inquiries, please make sure you have the
following information on hand:
1. Product Name/Model Number
2. Serial Number/s
3. Purchase Date (as per invoice or proof of purchase)
4. Purchased From
5. Warranty Registration Number
www.omegaappliances.co.nz
Omega is division of Monaco Corporation Limited (Member
of Shriro Australia PTY LTD)
Phone: [phone]
Email: [email protected]

1