Omni Instruments Frigga A90 User manual

Frigga A90 (Single-use)
New Generation of Temperature Logger
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

Appearance Instruction
Note：The AC code（Activation code）is in the back of devices.
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

Instructions
Throughout the transportation, please maintain Frigga A90 in
seal state. (Do not tear open the package).
1. Start：
Long press “Start/Stop” button till red
& blue LED indicators flash, the
device is ready. Start delay is 30 min.
(In this stage blue led will flash every
10 sec.), after delay time, the LED
stop and the device start to record the
temperature data. (Using default
thresholds).
Usage method is same as
traditional USB logger.
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

2. Setting：
Thresholds can be changed via cloud
platform. On the page “Device
Setting”, we can:
●Change the temperature thresholds
●Add alarm notification personnel
●Share equipment to someone
●Set up automatic flight mode
3. Transport：
Put the device into the goods
and begin to transport.
Setting position notification●
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

4. Monitoring：
Whether you set up the equipment or not, you also can monitor
the temperature, location, route on the cloud platform.
●When the temperature is over limit, the cloud platform will
notify the relevant person by mail or SMS.
●Notify the presupposed person when the equipment reaches
the designated location.
●When the equipment arrives near the designated airport, the
device will enter the flight mode automatically.
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

5. Stop：
Three ways to end journey:
①Long press “Start/Stop”
button till red & blue LED
indicators flash, the device
is ending.
②Tear open the wrapping,
plug in the logger into PC.
③Via cloud platform, inform
the device to stop, and the
device will respond within
one hour in a good signal
environment.
②
③
①
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

6. Report：
①When stop record data, device will generate PDF
report automatically. Via USB connect with PC, can
access it directly.
②On the Frigga cloud platform, the whole transportation
data will be backed up, and can be viewed through
device ID and transportation time.
Report Data
②
①
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

Cautions
8
Please read the following notes carefully before
using:
⚫When you find that the device didn’t upload the data to
cloud, Please confirm that the device is working
properly or whether the device is in flight mode.
⚫Please confirm that the device is working in the
measurement range.
⚫Do not use external force to impact the device.
⚫Do not take apart the device by yourself.
⚫Please keep the device away from fire.
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]

Key Features
Omni Instruments Ltd
Website: www.omniinstruments.co.uk
Email: [email protected]
Fax: [phone]
Tel: [phone]
Local Tel: [phone]