Omron SC21 User manual

i
Introduction
Thank you for purchasing the OMRON “Network card SC21” (this product hereafter).
This document contains the information you need for using safely this product.
Please read carefully before installation and use.
About Disclaimers
We may not respond to the compensation for any damages even if they are caused by the
use of our products, including the abnormalities and failures of the equipment, connection
devices, and software.
Request for using
●Pleaseread the safety precautions described in the beginning carefully before use.
●To transfer or sell this product to a third party, attach all the documents and other
accessories contained in the product package to this product. It is supposed that this
product is to be used in accordance with the conditions specified in the attached
documents.
●When disposing of this product, please handle correctly according to the disposal
method of each local government.
●Store this document near this product so it can be referenced whenever required.
About export of this product
When you take out (export) this product overseas, check the web page “About export” of
our division.
It is necessary the information such as applicant’s information, product types, scheduled
number of exported products, final destinations and end user’s information.
[Web page] http://www.omron.co.jp/ese/ups/support/export.html
●The document may not be reproduced in whole or in part without the express written
permission.
●The contents of the document may change in the future, without notice.
●The warranty is attached at the end of this document.
●Check the latest information of the product on our Website
(http://www.omron.co.jp/ese/ups/).
●Windows and other names are the registered trademarks or trademarks of United
States Microsoft Corporation in the United States and other countries.
●Other company names and product names are the trademarks, or registered
trademarks belong to their respective owners.
© OMRON Corporation. 2018 All Rights Reserved

ii
Safety Precautions
Safety
Precautions
The following describes important instructions for using
this product safely. Please read carefully before installing
or using the unit.
●The symbols and respective meanings regarding the safety of this Instruction
Manual are as follows.
Caution This symbol indicates that incorrect use may cause
injury or property damage.
※
Property damage represents extended damage to houses,
household effects, livestock, and pets.
This indicates prohibition (what you must not do).
For example, indicates that disassembling is prohibited.
This indicates obligation (what you must do).
For example, indicates that an earth ground connection is
required.
Note that even a point described with the Caution symbol could result in a serious event
depending on the situation.
Make sure of paying attention to these symbols containing critical indications.
Observe the contents of this manual and the UPS such as the use
conditions and environments.
When attaching or removing the product, place the UPS on a stable
and in the direction which does not to tip over. Do not drop this
product.
●Dropping or toppling the unit may cause injury.
●If you drop this product, stop using it and have it inspected and repaired.
Provide secure grounding for the UPS.
●For a 3P wall outlet, directly connect the AC input plug of the UPS to it.
●When a power outlet is 2P, after attaching a 3P-2P conversion plug for AC
input plug, perform grounding. Or perform grounding from connection terminal
of the UPS.
●In case of a terminal block connection, perform grounding from connection
terminal.
●Without an earth connection, the unit can fail or cause an electric shock due to
the electric leakage.

iii
When attaching and removing this product, always turn OFF the power
switch of the UPS and connected device, and disconnect the AC input
plug from the wall.
● Not doing so may cause a failure of the unit and connected device.
When attaching, unpacking and removing this product, do not touch
the parts on the basal plate.
● Doing so may cause injury.
● This product uses the parts sensitive to static electricity.
Do not touch especially the connector and other parts.
● If parts become high temperature, it is possible to get burned.
Do not leave the place to become the high temperature and a strong
place of the direct lays of the sun.
● Battery gets very hot, and there is a danger of explosion or fire.
Do not make it wet or put water on it.
● Electric shock or fire can occur.
● When you soak in water, please stop use of this product immediately, and
request check and repair.
Do not throw the unit into a fire, do not disassemble or heat up the
unit.
● The unit may explode or cause a fire.
Do not disassemble, modify or repair this product by yourself.
● Doing so may cause injury or a fire.
Do not connect a LAN cable to the EMD connector of this product.
● If it is connected by mistake, the network equipment may fail.
For the USB connector of this product, do not connect other than a
specified USB equipment.
● Not doing so may cause a failure of the unit and connected device.
Do not connect the connector (type A) mounted this product and the
mini USB connector (Mini-B) with a USB connector.
● Not doing so may malfunction to the unit or connected equipment.
The removed battery should not be put on the place which infants’
hand reaches.
● There is a risk that the infant swallow.
+ and – of a battery are not short-circuited with wire etc.
● There is a risk of starting generation of heat and a fire.

iv
If you notice abnormal sound or smell or smoke, immediately turn off
the power switch of the connected UPS and disconnect the AC input
plug from a wall outlet.
● If you notice such a condition, stop using the unit and contact the shop of
purchase or our company for inspection and repairs.
A liquid cannot be touched even if a liquid is on an internal board.
● If it adheres to eyes or the skin, please wash away with a lot of clean water
immediately, and receive a medical examination of a doctor.
About disposal of this product
● Dispose of this product correctly by putting it in a plastic bag according to the
separating rules prescribed by municipalities.
● For corporations, dispose of this product as industrial wastes.
This symbol mark is for intending to separate Waste Electrical and
Electronic Equipment Directive (WEEE) from general household
wastes and discard it. Please cooperate with reusing and recycling
products for reducing the reclamation quantity of Waste Electrical
and Electronic Equipment Directive (WEEE) and the influence on
the environment. For proper disposal, please contact the near
retailer or agent where you bought this product. This symbol mark
and recycling system are applied only to the EU Member States and
are not applied to countries in other regions.

v
CONTENTS
Introduction....................................................................................................................i
Safety Precautions .......................................................................................................ii
About disposal of this product....................................................................................iv
CONTENTS..................................................................................................................v
About this product.........................................................................................................1
Enclosed items ...........................................................................................................1
Names and functions of parts .....................................................................................1
Supported models, software .......................................................................................2
Supported UPS model ........................................................................................... 2
Recommended web browser ................................................................................. 2
Supported wireless LAN adapter............................................................................ 2
Operation confirmed USB memories...................................................................... 2
Attaching to a UPS .......................................................................................................3
Network Setting ............................................................................................................4
Changing with terminal soft ........................................................................................5
Changing with Telnet ..................................................................................................8
Changing network settings of a computer (In case of Windows10) ........................ 8
Changing network settings of this product with Telnet. ......................................... 10
Web monitor ...............................................................................................................11
How to logout ....................................................................................................... 12
Enabling Telnet ...........................................................................................................13
Confirm the USB serial port. .......................................................................................14
■In case of Windows10..................................................................................... 14
■When a UPS serial port is not recognized normally, ....................................... 15
Specifications .............................................................................................................16
安全上的注意事项.......................................................................................................18
保修协协条款..............................................................................................................22
保修单.........................................................................................................................24

1
About this product
Enclosed items
Please check whether there is any damage in the appearance of this product, or all the
accessories are included. When a packing article has faults and shortage, please ask the
store where you purchased it.
*1: Paste the serial number seal on the warranty on page 19. (The other is for spare.)
Names and functions of parts
①Setup port Use the port for setting (mini-B 5 pins) / USB cable that comes with this
product.
②Restart button This product is restarted.
③Status lamp ※This product does not use it.
④Power lamp Green / It turns on when it is possible to communicate.
⑤Act lamp Yellow / It turns on during transferring of data.
⑥100/10 lamp Green / Lighting: 100M, Lighting-out: 10M
⑦USB port USB Wi-Fi adapter, USB memories, etc are connected.
⑧EMD port ※This product does not use it.
⑨Network port RJ45 port / LAN are connected.
UPS Connection Pin
Bracket
Screw Hole
SC21 (1 piece) USB cable (1 piece) Setup guide
(This document/ with
warranty)
Identifica
tion tag
(1 piece)
Compliance sheet
(1 piece)
Serial number seal
(2 pieces) *1
①
②③ ④ ⑤ ⑥
⑦ ⑧
⑨

2
Supported models, software
(As of June, twenty-eighteen.)
Supported UPS model
Japanese model Chinese model European
model
100V model BN75R/BN150R/BN300R
BN150XR
BN50T/BN75T/BN100T/BN150T
BN220T/BN300T
BL50T/BL75T/BL100T
BU75RW/BU100RW/BU200RW
/BU300RW
BU60RE/BU100RE
BU150R
BU50SW/BU75SW/BU100SW/BU150SW
BU100RWCH/BU300RWCH
BU100RECH
BU75SWCH/BU150SWCH
---------------
200V model BU1002RW
BU1002SW/BU3002SW
BU1002SWCH/BU3002SWCH
BU1002SWCL/BU3002SWCL
BU1002SWG
BU3002SWG
Recommended web browser
Windows
Internet Explorer 11
Mac
Safari 11 or more
Linux Firefox ESR 52 or more
Supported wireless LAN adapter
EW-7811Un made by EDIMAX
Operation confirmed USB memories
RUF3-AL032G made by BUFFALO
GH-UF3TA32G made by GREEN HOUSE

3
Attaching to a UPS
Attach this product to the card slot behind a UPS.
Since the position of the card slot differs for each model, refer to the UPS instruction
manual for details.
When you perform insertion and removal of this product, be sure to turn off a UPS
pull out "AC input" plug from a commercial power supply receptacle.
①Remove two screws and cover (or existing card).
②Insert this product and push it to fix certainly the terminal behind the card to the UPS’s
connector.
Confirm the inserting direction, and do not push it in forcefully.