One Forall Audio Zapper User manual

URC-6540
URC-6541
Retain For Future Reference
Sorgfältig aufbewahren
A conserver soigneusement
USERGUIDE&CODEBOOK.... . . . . .. . . . . .. . . . . .. . . . . . .. . . . . .p. 2
BEDIENUNGSANLEITUNG&EINSTELLCODES ....p. 22
MODED’EMPLOI& LISTEDES CODES ...... . . . . ... . . . . .p. 42
Universal Remote
Universal-Fernbedienung
Télécommande Universelle
UK
D
F

2WWW.ONEFORALL.COM
Table of Contents
ABOUT YOUR AUDIO ZAPPER 3
FEATURES AND FUNCTIONS 5
INSTALLING THE BATTERIES 7
INSTALLATION 8
Direct Set-Up 8
Key Lock/Unlock 10
Input Select Toggle 11
Search Method 12
Quick Code Reference 15
ADVANCED FEATURES 16
Mode Reassignment 16
Learning Feature 17
TROUBLE SHOOTING 20
Helpful Hints 20
Consumer Help-Line 21
SET-UP CODES 62
UK

WWW.ONEFORALL.COM 3
About your AUDIO ZAPPER
Thank you for purchasing the AUDIO ZAPPER
universal remote control (URC-6540 or URC-6541).
Your Zapper package contains:
• The AUDIO ZAPPER Remote Control
• The AUDIO ZAPPER User Guide and Codebook
The User Guide and Code Book explains in simple
steps how to set-up and operate your new
universal remote control. You may need this guide
again in the future, so please be sure to keep it.
Your AUDIO ZAPPER requires 2 new "AAA/LR03"
Alkaline batteries.
Your AUDIO ZAPPER is a perfect solution for
replacing the basic functions of your lost or broken
audio remote control. You can operate the basic
functions of your Amplifier/Tuner, CD Player, Mini
Disc Player, and Audio Cassette Player. The AUDIO
ZAPPER is also ideal for use in place of your
complicated audio remote. With the Learning
feature, you can easily customize the AUDIO
ZAPPER for your favorite functions.
The illustration and the chart on the following
pages describe the features and functions of the
AUDIO ZAPPER universal remote control.

4WWW.ONEFORALL.COM
About your AUDIO ZAPPER
Device
Keys
Volume
- Volume +
Programme +/
Track +
Programme
- /
Track -
Mute
MAGIC Power
Transport
Keys

Features and Functions
WWW.ONEFORALL.COM 5
Function
LED
The LED (Light Emitting Diode)
flashes as soon as you press any
valid key. It is also used during
set-up for user feed back.
Magic Key
The MAGIC key is used to set-up
your AUDIO ZAPPER and to access
special features.
Power Key
The Power key will turn your
Amplifier/Tuner both on and off
when in the TUN mode. This key
may also open and close your CD
tray when in the CD mode.
Device Keys
The TUN, CD, TAPE, and MD keys
select the component of your
system to be controlled. Pressing
the TUN key allows the remote to
control the basic functions of your
Amplifier/Tuner. After pressing
the CD key, you can operate the
basic functions of your CD player.
After pressing the TAPE key, the
transport keys operate your Audio
Cassette Player. After pressing the
MD key, you can operate the basic
functions of your Mini-Disc player.
Mute Key
The Mute key operates the same
function as the Mute key on your
original remote control.
Volume +/-, Programme +/- Keys
The Volume keys control the
volume level of your HI-FI.
After pressing the TUN key, the
Programme +/ - keys change the
pre-set stations up and down on
your Tuner.
MAGIC
CD
TUN
TAPE
MD

Features and Functions
6WWW.ONEFORALL.COM
Function
If Magic is first pressed, the
programme +/ - keys will search
up and down for the next
available station of your tuner.
After pressing the CD key, the
Programme +/– keys change the
track of your CD player up and
down. If Magic is first pressed,
the Programme +/- change the
disc up and down if this function
is available for your CD player.
Transport Keys
The Play key will cause your CD,
MD, or Audio Cassette to begin to
play, depending upon what mode
key you have selected. If Magic is
first pressed, the Play key will
cause the device to begin to
record, when applicable.
The Stop and Pause keys operate
the same function as on your
original remote control.
After pressing the CD key, the FF
and REW keys will search forward
and reverse through the song that
is playing.
After pressing the TAPE key, the
FF and REW keys will operate as
fast forward and rewind.
F Key (Function Key)
The F key allows you to select the
input of your Amplifier/Tuner.
Even if your original remote
control has a separate key for
each output (Tuner, CD, Tape,
etc.), the AUDIO ZAPPER’s F key
will send a different output
selection with each key press.
F

Installing the Batteries
WWW.ONEFORALL.COM 7
The AUDIO ZAPPER needs 2 new "AAA/LRO3"
alkaline batteries.
Remove the battery cover from
the back of the AUDIO ZAPPER by
pressing down on the tab.
Match the batteries to the +/-
marks inside the battery case,
then insert the batteries.
Press the battery cover back into
place.
Important notes:
- It is best that you do not use rechargeable
batteries.
- On the inside of the battery compartment door
you will find a label on which to write your set-
up codes after your ZAPPER is set up for your
devices. Please write down your codes for easy,
future reference.
- Upon removing the batteries, your set-up codes
and advanced programming will be retained.
1
2
3

Direct Set-Up
8WWW.ONEFORALL.COM
Setting Up Your Amplifier/Tuner
The following instructions allow you to set-up your
Audio System whether it be a Micro-System, Mini-
System, or separate components.
Find your HI-FI code in the Set-Up code section
(starting on page 62). Codes are listed by brand
name. The most popular code is listed first. Make
sure that your HI-FI set is switched on.
Press and release the TUN key.
Press and hold down MAGIC
until the red light blinks twice (the
light will blink once then twice).
Enter your 6-digit code
according to the chart below.
The red light will blink twice.
Example: To enter Pioneer code 121312 you
would press: Vol+, Vol
- , Vol+, Ch+, Vol+, Vol -.
Now, aim the AUDIO ZAPPER at your HI-FI set
and press POWER. If your HI-FI set switches
off, turn your HI-FI set back on manually and
try all the other keys on the AUDIO ZAPPER
Keypad and fill in the "Set-Up table".
If all functions do not work properly, you should
lock those functions that do work properly (refer
to page 10 for Key Lock instructions), then try the
next code in the list.
If all functions on the keypad work, except for
input select please refer to page 11 for the Input
Select Toggle.
Write the codes for your HI-FI in the boxes
inside the battery compartment and on
page 15 for easy future reference.
1
2
3
4
MAGIC
TUN
______
VOL (+) = 1
VOL ( -) = 2
CH (+) = 3
CH ( -) = 4

Direct Set-Up
WWW.ONEFORALL.COM 9
Example for setting up a Pioneer Mini-System
One Amplifier/Tuner Set up code 121312
programmed on the TUN device key controls four of
the function keys (Power, Volume +, Volume -, and
F). These keys should be locked according to the
instructions on page 10.
These functions will remain after locking each key.
A second Amplifier/Tuner code 111143 could then
also be programmed on the TUN device key to
control the Programme + and Programme – for the
Tuner.
Set-Up Table
Audio Zapper Key TUN code TUN code
121312 111143
POWER X
Programme (+) X
Programme (-) X
Volume (+) X
Volume (-) X
F (input) X
Audio Zapper Key Code: Code: Code:
POWER
Programme (+)
Programme (-)
Volume (+)
Volume (-)
F (input)

Key Lock/Unlock
10 WWW.ONEFORALL.COM
The Key Lock feature allows you to retain a
function from the currently programmed code.
The locked keys remain even after another code
has been programmed on the same device key.
To Lock a function:
Press and release the device key
(TUN, CD, TAPE or MD).
Press and hold down MAGIC
until the red light blinks twice (the
light will blink once then twice).
Next, press Programme -,
Programme +, Programme -
(the LED will blink twice).
Now press the function that you
would like to lock (the LED will blink
twice). For example, Programme +.
To Unlock a function:
Press and release the device key.
Press and hold down MAGIC
until the red light blinks twice (the
light will blink once then twice).
Next, press Programme -,
Programme +, Programme -
(the LED will blink twice).
Now press the function that you
would like to unlock (the LED will
blink four times).
Please note that steps 1-4 must be
repeated for each function that you wish
to lock or unlock.
1
2
3
4
MAGIC
TUN
TUN
1
2
3
4
MAGIC

Input Select Toggle (F Key)
WWW.ONEFORALL.COM 11
The F (Function) key is designed to select the input of
your HiFi. The Input Select Toggle allows you to use
the F (Function) key to cycle through your inputs.
If the F key is not changing the input:
Press and hold down MAGIC
until the light blinks twice (the
light will blink once then twice).
Press Programme -, Programme +,
Volume - (The light blinks twice).
The Input Select Toggle is now programmed.
Setting Up a CD Player, Mini-Disc Player or
Cassette Player
To program a CD Player, Mini-Disc Player, or Audio
Cassette Player use the following instructions.
Insert a CD, Mini-Disc, or Audio Cassette into the
appropriate player. Ensure that the output of your
Amplifier/Tuner is selected for the device that you
are going to program.
Press and release the CD, MD, or TAPE key.
Press and hold down MAGIC
until the red light blinks twice (the
light will blink once then twice).
Enter your 6-digit code
according to the chart below.
Codes are listed on pages 62-71.
The red light will blink twice.
VOL (+) = 1
VOL (-) = 2
CH (+) = 3
CH (-) = 4
Press PLAY to verify that you have
programmed the correct code.
1
2
1
2
3
4
MAGIC
MAGIC
______

Search Method
12 WWW.ONEFORALL.COM
If your Audio System does not respond to the AUDIO
ZAPPER after trying all the codes listed for your
brand, try searching for your code. You may also try
the Search Method when your brand is not listed at
all. To search for your Amplifier/Tuner code:
Turn on your Amplifier/Tuner.
Press the TUN key on the AUDIO
ZAPPER.
Then, press and hold the MAGIC
key until the LED blinks twice (the
LED will blink once then twice).
Next, press the Programme - key
three times.
Next, alternate between TUN and
POWER until your Amplifier/Tuner
turns off. You may have to press
these keys many times, so be
patient. Remember, you must aim
the AUDIO ZAPPER at your device
the entire time you are searching
for your code.
When your device turns off, press
and release MAGIC.
The AUDIO ZAPPER should now be ready to
operate your device. Turn your device back on
manually and try all the remote's functions to
ensure they are working properly. If some of the
AUDIO ZAPPER’S commands are not operating
correctly, you can lock the keys that do function
correctly (see page 10), then try the search method
again. In this method you should alternate
between TUN and the key that is not functioning
correctly in order to find the correct code for that
function.
For example, the search may reveal a code that
controls the Power and the Volume, but not the
stations of your Tuner. You would then manually
place your Amplifier in the Tuner mode, then
alternate between TUN and Programme+ during
the second search.
1
2
TUN
3
MAGIC
6
MAGIC
4
5
TUN

Search Method
WWW.ONEFORALL.COM 13
Important notes:
- When you want to control your device, press
the device key first (TUN, CD, TAPE, or MD).
- To search for the code for your CD Player or
Audio Cassette Player, follow the same
instructions above, only press the CD or TAPE
key during step 2 and alternate between CD or
TAPE and the PLAY key while performing the
search.
- During step 5, you may have to press these
keys many times (up to 150!), so be patient.
Remember, you must aim the AUDIO ZAPPER
at your device the entire time you are
searching for your code.
After you have used the Search Method, you can
find out which code the AUDIO ZAPPER responded
to by blinking back the code. It's handy to know
your Amplifier/Tuner, CD Player, MD Player, and
Audio Cassette codes for future reference.
Remember, you can only blink back your code after
the AUDIO ZAPPER is operating your device.
To blink out your TUN code:
Press the TUN key on the AUDIO
ZAPPER.
Then, press and hold the MAGIC
key until the LED blinks twice (the
LED will blink once then twice).
Next, press Programme-,
Programme-, Programme+.
For the first digit of your 6-digit
code, press Volume+ and count
all the red blinks.
For the second digit, press
Volume - and count all the red
blinks.
1
TUN
2
MAGIC
3
4
5

Search Method
14 WWW.ONEFORALL.COM
For the third digit, press
Programme+ and count all the
red blinks.
For the fourth digit, press
Programme- and count all the
red blinks.
For the fifth digit, press MUTE
and count all the red blinks.
For the sixth digit, press PLAY and
count all the red blinks.
Now you have your 6-digit code.
Write the codes for your devices
in the boxes in the battery
compartment and on page 15 for
easy, future reference.
Important note: To blink out the code for
your CD Player, MD Player or Audio Cassette
Player, follow the same instructions above,
only press the CD, MD or TAPE key during
step 1.
7
8
9
10
6

WWW.ONEFORALL.COM 15
Quick Code Reference
■■■■■■■■■■■■
■■■■■■■■■■■■
■■■■■■■■■■■■
■■■■■■■■■■■■
■■■■■■■■■■■■
The pages 62-71 list the codes for your equipment.
The most popular codes for each brand are listed
first.
Write down the codes for your devices in the
boxes below and in the battery compartment
for quick and easy reference.
Device Type Code
______________________
______________________
______________________
______________________
______________________

16 WWW.ONEFORALL.COM
Advanced Features
Mode Reassignment
As the TUN, CD, and MD device keys all provide
access to Amplifier/Tuner, Amplifier, CD and MD
codes, it is not necessary to reassign device keys
unless you would like to operate a second Audio
Cassette Player. You could, as an example, use the
MD key to operate Deck B of your Audio Cassette
Player.
To reassign the MD device key as a second Audio
Cassette device key:
Press and hold down MAGIC
until the light blinks twice (the
LED will blink once then twice).
Press Programme -, Programme -,
Volume + (The LED blinks twice).
Press the TAPE key.
Press the MD key. (The LED blinks
twice).
You can now program an Audio Cassette Player on
the MD key (see page 11).
Note: To reset the key back to its original mode, press
the MD key twice after step 2.
1
MAGIC
2
3
TAPE
4
MD

WWW.ONEFORALL.COM 17
Advanced Features
Learning Feature
The AUDIO ZAPPER comes with a complete library
of preprogrammed codes. After you have set up
the AUDIO ZAPPER for your device, you may find
that there are one or more keys which you had on
your original remote which do not have a place on
the AUDIO ZAPPER keypad.
As a convenience, the AUDIO ZAPPER offers a
special Learning feature that allows you to copy
any function from your original audio remote
control onto the keypad of the AUDIO ZAPPER.
To use the Learning feature, please follow the
instructions below. You can learn a function from
your original remote control onto any key of the
AUDIO ZAPPER except for the MAGIC key and the
device keys (TUN, CD, TAPE, and MD). If you
require to learn more per mode, you will need to
place the learned function on a shifted key. Please
see the next section titled Shifted Learning.
Before you start:
- Make sure your original remote control is
working correctly.
- Make sure your AUDIO ZAPPER nor your original
remote control are pointing at your device.
Place both remote controls (the AUDIO
ZAPPER and your original) on a flat
surface. Make sure the ends which you
normally point at your device are facing
each other. Keep the remotes at a
distance of 2 to 5 cm.
Press and hold down the MAGIC key until
the light blinks twice (the light blinks once
then twice).
Press Programme -, Volume -, Volume +
(the light will blink twice).
Press the device key (on the AUDIO
ZAPPER remote) to select the mode to
which you want to copy the learned function.
1
2
3
4

18 WWW.ONEFORALL.COM
Advanced Features
Press the key (on the AUDIO ZAPPER
remote) where you want to place the
learned function (the LED will flash rapidly).
Press and hold the key (on your original
remote) that you want to copy until the LED
on the AUDIO ZAPPER blinks twice.
If you want to copy other functions within
the same mode, simply repeat steps 5 and 6
pressing the next key you want to copy by
learning. If you would like to continue
learning but in a different mode (with
another original remote), repeat steps 4-6.
To exit the learning mode, press and hold
MAGIC until the LED blinks twice.
Learning is mode specific. To access your
learned function, press the appropriate
device key first.
Shifted Learning
You can also learn a function on a key of the
AUDIO ZAPPER without sacrificing the original
AUDIO ZAPPER function. A Shifted Learning
function can be put on any key EXCEPT the
following: Device keys, Magic key.
To install a Shifted Learning function, simply
follow steps 1-8 on the previous page. During step
5, press MAGIC one time beforeyou press the key
where you are placing the learned function.
To access the shifted function, press Magic and
then the key you have learned on.
5
6
7
8
9

WWW.ONEFORALL.COM 19
Advanced Features
To delete a learned function:
It is possible to delete all learned functions or only
individual learned functions.
To delete individual learned functions, follow the
steps as outline below.
Press and hold MAGIC until the light blinks
twice (the light will blink once then twice).
Press Programme -, Volume -, Volume -
(the LED will blink twice).
Press the device key in which the function
will be deleted.
Press twice on the learned key which will
be deleted (the LED will blink twice).*
If there is another key which you wish to
delete, repeat steps 2-4.
The original functions of the AUDIO ZAPPER
will now be present.
* To delete a Shifted Learned function, press
MAGIC before you press the learned key to be
deleted (during step 4).
To delete all learned functions across all modes:
Press and hold MAGIC until the light blinks
twice (the light will blink once then twice).
Press Programme -, Volume +, Volume -
(the light will blink four times).
Notes:
- During steps 2-8 (pg 17-18), you have approximately 10
seconds to conduct each step. If there is a gap of more
than 10 seconds between two steps, you will have to
start over at step number 2.
- If you learn a function on a key that already performs a
function, the original AUDIO ZAPPER feature
automatically becomes shifted. You can press MAGIC and
then the key to access it.
- The Learning feature is mode specific. Therefore you can
place one learned feature per mode on the same key.
- The AUDIO ZAPPER can learn approximately 16 functions.
- You can replace a learned function by placing another
learned function on top.
- Learning should not be done in direct sunlight or under
incandescent lights.
- Make sure you are using new batteries before following
the instructions above.
- Upon changing the batteries, your learned functions will
be retained.
1
2
3
4
5
6
1
2

20 WWW.ONEFORALL.COM
Trouble Shouting
Helpful Hints
Problem:
The red light does not
blink when you press
a key?
The AUDIO ZAPPER
does not respond after
pressing a key?
The AUDIO ZAPPER
does not operate your
device?
Your brand is not listed
in the AUDIO ZAPPER
code section?
The AUDIO ZAPPER
is not performing
commands properly?
A function does not
work after trying all
the codes?
Solution:
Replace batteries with 2
new "AAA/LR03"
alkaline batteries.
Make sure you are using
new batteries and are
aiming the
AUDIO ZAPPER at
your device.
A) Try all the codes listed
for your brand.
B) Try the search method.
Try the search method.
A) Try all the codes listed
for your brand.
B) Try the search method.
A) Try all the codes listed
under your brand as
well as the Key Lock on
page 10.
B) Use the learning
feature on page 17 if
your original remote is
operating correctly.