One Forall OARI06G User manual

5SERS'UIDEs'UIDEDELUTILISATEURs
'UÓADEL5SUARIO
OARI06G
6-Device Universal Remote with
One For All SmartControl
Télécommande universelle
6 appareils avec One For All
SmartControl
Control Remoto Universal para 6
Dispositivos con SmartControl de
One For All
%NGLISH
Introduction................................................ 2
Installing Batteries ................................... 2
Programming Your Remote....................... 3
One For All SmartControl .......................... 9
Advanced Features................................... 15
Volume Lock........................................... 15
Learning ................................................. 16
Mode Reassignment .............................. 17
Macros .................................................... 18
Checking the Programmed Codes......... 19
Resetting the Remote............................ 20
Troubleshooting....................................... 20
12 Month Limited Warranty.................... 62
&RANAIS
Introduction.............................................. 22
Installation des piles .............................. 22
Programmation de la télécommande..... 23
One For All SmartControl ........................ 29
Fonctionnalités avancées......................... 35
Verrouillage du volume......................... 35
Apprentissage ........................................ 36
Réaffectation du mode.......................... 37
Macros .................................................... 38
Vérification des codes programmés...... 39
Réinitialisation de la télécommande .... 40
Dépannage ............................................... 40
Garantie limitée de 12 mois .................... 62
%SPA×OL
Introducción ............................................. 42
Instalación de las Baterías ..................... 42
Programación del control remoto........... 43
SmartControl de One For All................... 49
Características avanzadas ........................ 55
Bloqueo de Volumen ............................. 55
Aprendizaje............................................ 56
Reasignación de Modos......................... 57
Macros .................................................... 58
Verificación de Códigos Programados.. 59
Restablecimiento del Control Remoto.. 60
Resolución de Problemas......................... 60
Garantía Limitada de 12 Meses............... 63

2
)NTRODUCTION
The One For All SmartControl Universal Remote
revolutionizes home entertainment by making it easier than
ever to control everything in your home theater. This remote
controls 3 activities—watch TV, watch movie, and listen to
music—involving up to 6 devices in your home theater. The
One For All SmartControl Remote automatically puts you
in control of the right devices to change channels, control
volume...virtually everything you need to do when you’re
watching TV, watching a movie, or listening to music. The
One For All SmartControl Remote also lets you power the
devices you need for each activity in a few simple steps.
And with One For All SimpleSet setup, programming the
remote is as easy as 1-2-3...no PC required (see the One For
All SimpleSet guide that came with this remote for more
information).
)NSTALLING"ATTERIES
1. On the remote control’s back, push down on the top of
the battery cover. Then slide the battery cover out.
2. Insert 4 new AAA
alkaline batteries (not
included). Match the
+ and – marks on the
batteries to the + and
– marks in the battery
case, then insert the new
batteries.
3. Slide the battery cover
back into place. The tab
should click when the
cover is locked.
NOTE: When batteries are low, the device indicators will
dim and eventually not light up at all. This means you
should change the batteries.
Battery Precautions:
s$ONOTMIXOLDANDNEWBATTERIES
s$ONOTMIXALKALINESTANDARDCARBONZINCORRECHARGEABLE
(nickel-cadmium) batteries.
s!LWAYSREMOVEOLDWEAKORWORNOUTBATTERIESPROMPTLY
and recycle or dispose of them in accordance with Local and
National Regulations.
AAA x 4

3
English
0ROGRAMMING9OUR2EMOTE
The One For All SmartControl Universal Remote makes
programming your remote as easy as 1-2-3 with One For All
SimpleSet setup. The One For All SimpleSet Guide that came
with this remote tells you how to use One For All SimpleSet
setup to get started.
If you have problems using One For All SimpleSet setup to
program the remote for one or more of your devices, you can
use one of the other programming methods described in the
following sections: Direct Code Setup or Code Search.
What Mode Should I Use For My Device?
You can set up the following devices within the 6 device
MODESTVDTCSATCBLDVDAUDIOMEDIAANDDVRAUX
Just select the corresponding device modes using the left
and right arrow keys.
mode code
listing device type
tv TV Television / HDTV / LCD / Plasma /
Projector / Rear Projector
dtc
sat/cbl
Satellite 3ATELLITE2ECEIVER3ET4OP"OX
IPTV / DVB-S / DVB-T / SAT/HDD
Cable #ABLE#ONVERTER3ET4OP"OX
IPTV / DVB-C
Video
Accessories
Media Centres / AV Accessories /
AV Selectors
dvd DVD
DVD Player / DVD-R / Blu-Ray /
DVD Home Cinema / DVD Combo /
DVD-HDD
audio
Audio
Accessories Audio / Miscellaneous Audio
Audio
Amplifiers
Audio / Amplifier / Active
Speaker System
Audio
Receivers
Audio / Audio Receiver-Tuner/
Amplifier / (DVD) Home Cinema
media
Video
Accessories
Media Center / Game Console /
0LAYSTATION8BOX
Audio
Accessories
Mp3 Players / iPod docks /
Miscellaneous Audio
Audio
Amplifiers
Audio / Amplifier / Active
Speaker System
Audio
Receivers
Audio / Audio Receiver-Tuner-
Amplifier / (DVD) Home Cinema
dvr/aux
Video
Accessories
Game Console / Playstation 2 /
8BOX-EDIA#ENTER
DVD
DVD Player / DVD-R / Blu-ray / DVD
Home Cinema / DVD Combo /
DVD-HDD
continues on next page...

4
3. Press and hold the
SETUP key until the blue
ring flashes twice.
4. Use the device select
keys to highlight the
device you want to
PROGRAMFOREXAMPLE
for a TV, highlight TV).
If your device turns off:
That’s it! You’ve programmed the remote for this device.
Test other functions with the remote to make sure they
WORKFOREXAMPLETHEPLAYPAUSEREVERSEFORWARDKEYS
WITHA$6$PLAYER)FTHEYDONTTRYTHENEXTCODELISTED
for your brand.
If your device does NOT turn off:
2EPEATSTEPSTRYINGTHENEXTCODELISTEDFORYOUR
brand.
If you can’t find a code that operates your device, try the
CODESEARCHMETHODDESCRIBEDNEXT
$IRECT#ODE3ETUP
1. Manually turn on your
device (your TV, DVD
player, etc.).
2. Find the code for your device in the Code List. Codes are
listed by device type and brand name. The most popular
code is listed first. Make sure your device is switched on
(not on standby).
Important: If you’re programming a DVD player, game
console (like a PS2), or MP3 player/dock, make sure
there’s something playing before you start programming
the remote.
5. Enter the first code
listed for your device
type and brand (for an
(ITACHI46FOREXAMPLE
you’d press 1 1 4 5)
6. Point the remote at the
front of the device and
press .
Note: If the device’s
original remote doesn’t
have a power key, press
the (pause) key in this
step instead.

5
English
#ODE3EARCH
1. Manually turn on your
device (your TV, DVD
player, etc.).
2. Press and hold the
SETUP key until the blue
ring flashes twice.
3. Use the device select
keys to highlight the
device you want to
PROGRAMFOREXAMPLE
for a TV, highlight TV).
Important: If you’re programming a DVD player, game
console (like a PS2), or MP3 player/dock, make sure
there’s something playing before you start programming
the remote.
7. Press the SETUP key to
save your settings.
That’s it! You’ve
programmed the remote
for this device. Test
other functions with the
REMOTETOMAKESURETHEYWORKFOREXAMPLETHEPLAY
pause/reverse/forward keys with a DVD player). If they
don’t, repeat steps 1–7 above. When the device switches
off in step 5, do not press setup. Instead, keep pressing
(channel up) over and over until the device turns back
on. Then press SETUP and test the remote.
codes from its library to the selected device, starting with
the most popular code first. Every press of (channel
up) will send a new code. If you go past the code that
performed the test function, you can go back by pressing
(channel down).
4. Press 9 9 1. The blue
ring flashes twice.
5. Press .
Note: If the device’s
original remote doesn’t
have a power key, press
the (pause) key in this
step instead.
6. Press (channel up)
over and over until your
device switches off.
NOTE: In the search
mode, the remote
control will send IR

6
4OUROFTHE2EMOTE
SETUP Puts the remote into programming
mode, to set up the remote to control
your devices or to customize other
remote capabilities to your home theater.
FORMAT In tv or dtc/sat/cbl mode, this key changes
screen format. In dvd or audio mode, it
triggers open/close or eject.
Blue ring
indicator

7
English
-ASTER Switches on / off your home
entertainment device. Using One For All
SmartControl, this key switches on/off all
devices within the activated combination
– simply by pressing it for 2 seconds.
The device select keys let you switch
the device you’re controlling with the
remote. Use the arrows to highlight the
device you want to operate. Then use the
other remote keys to control that device.
These three One For All SmartControl
keys automatically put you in control
of the right devices to change channels,
control volume and playback—everything
you need to do when you’re...
watching TV ( ),
watching a movie ( ), or
listening to music ( ).
See the section on One For All
SmartControl for more information.
AUDIOand
VIDEOHELP
These keys help you find the correct
audio/video inputs for One For All
3MART#ONTROLACTIVITIES&OREXAMPLE
when you’re watching a movie, you
can press these to find the right
audio and video inputs on your home
entertainment devices.
These transport keys control your PVR/
DVR, VCR, DVD, or CD player. They
can also control Video On Demand (if
available from your cable or satellite
provider).
Notes:
Press the record key ( ) twice to start
recording a DVD, PVR/DVR, or VCR
program.
The LIST key works differently depending
which mode you’re in. In tv, dtc/sat/cbl
or dvd mode, it works as a program / list
key. In audio or media mode, it works as
a shuffle / random key.
The volume keys raise and lower volume.
The mute key turns the sound off or on.
The arrow keys move the cursor in
program guides and menu screens. Use
OK to choose options from your selected
device’s menu or guide.
Blue ring
indicator
Provides feedback during programming
and remote setup.
Use the channel up and down keys to
SELECTTHENEXTHIGHERORLOWERCHANNEL

8
The go back key works differently
depending which mode you’re in. In tv,
dtc/sat/cbl, or dvd mode, it takes you to
the previous channel. In audio mode, it
repeats a track.
Red, 9ELLOW,
Green, "LUE
The color keys access advanced functions
available on some satellite receivers,
CABLEBOXESAND"LURAYDISCPLAYERS
INFO Displays the current channel and
program/disc information.
MENU Displays the selected device’s main menu.
guide Displays the selected device’s program
guide or setup menu.
FAV Cycles through your favorite channels on
YOURCABLEBOXORSATELLITERECEIVER
ONDEMAND Accesses your program provider’s video-
on-demand interface. This key may not
work with all program providers. Test
the key, and if it doesn’t take you to your
program provider’s on-demand service,
you can program this key to access the
service. See the Macros section for more
information.
EXIT This key works differently depending
which mode you’re in. In dtc/sat/cbl or
dvd mode, it takes you back a screen or
EXITSAMENU)NTVORDTCSATCBLMODEIT
TURNSCAPTIONINGTEXTOFF
1 – 9, 0The number keys enter channels directly.
In audio mode, use the number keys to
select audio sources 1 through 10.
ENTERn When accessing digital TV channels (such
as 59.1), use this key to separate the main
channel (like 59) from the subchannel (in
this case, 1). You can also use this key to
confirm channel entry.
INPUT Use this key to scroll between source
inputs of your device. This key also
accesses other video sources in dtc/sat/
cab mode.

9
English
/NE&OR!LL3MART#ONTROL
Once you’ve set up the remote to operate your devices,
YOUREREADYTOCHANGETHEWAYYOUEXPERIENCEHOME
theater forever. The One For All SmartControl Universal
Remote makes it so easy to control everything in your home
theater that you’ll almost forget you’re using a remote at all.
This remote controls 3 activities—watch TV, watch movie,
and listen to music—involving up to 6 devices in your home
theater. One For All SmartControl simplifies your home
THEATEREXPERIENCEINTHREEWAYS
s /NE&OR!LL3MART#ONTROL$EVICE#ONTROLAUTOMATICALLY
puts you in control of the right devices to change
channels, control volume...virtually everything you need
to do when you’re watching TV, watching a movie, or
listening to music.
s /NE&OR!LL3MART#ONTROL!UDIO6IDEO(ELPKEYSMAKE
it easy to get the picture and sound you want on your
video and audio devices.
s /NE&OR!LL3MART#ONTROL-ASTER0OWERLETSYOUPOWERTHE
devices you need for each activity in a few simple steps.
3ETTING5P/NE&OR!LL3MART#ONTROL
Before you use One For All SmartControl for the first time,
take a look at the devices you use when you watch TV, watch
a movie, or listen to music. Then customize the remote to fit
your home theater.
To set up Watch TV settings:
1. Find the combination below that matches the devices
you use when you watch TV in your home theater.
1TV and SATCBLDTC
2TV and SATCBLDTC and AUDIO
3TV and AUDIO
4TV
 &OREXAMPLEIFYOUUSEASATELLITERECEIVERTOCHANGE
channels and your TV to control volume, you should use
combination 1. If you use a satellite receiver to change
channels and an audio receiver to control volume, use
combination 2.
2. Press and hold the
SETUP key until the blue
ring flashes twice.
3. Press the key. The
blue ring flashes twice.
4. Press the number key
for the combination
that matches your home
theater (see step 1). The
blue ring flashes twice.

10
2. Press and hold the
SETUP key until the blue
ring flashes twice.
3. Press the key. The
blue ring flashes twice.
4. Press the number key
for the combination
that matches your home
theater (see step 1). The
blue ring flashes twice.
That’s it! You’re ready to use One For All SmartControl to
control your home theater when you watch movies. To find
out how to use One For All SmartControl, see the Using One
For All SmartControl section on page 12. To set up One For
!LL3MART#ONTROLFOR,ISTENINGTO-USICCONTINUETOTHENEXT
section.
That’s it! You’re ready to use One For All SmartControl to
control your home theater when you watch TV. To find out
how to use One For All SmartControl, see the Using One For
All SmartControl section on page 12. To set up One For All
SmartControl for Watching Movies and Listening to Music,
CONTINUETOTHENEXTSECTION
To set up Watch Movie settings:
1. Find the combination below that matches the devices
you use when you watch movies in your home theater.
1TV and DVD
2TV and DVD and AUDIO
3TV and DVRAUX
4TV and DVRAUXand AUDIO
5TV
 &OREXAMPLEIFYOUUSEA$6$PLAYERTOPLAYADISCAND
your TV to control volume, you should use combination
1. If you use a DVD player to play a disc and an audio
receiver to control volume, use combination 2.

11
English
2. Press and hold the
SETUP key until the blue
ring flashes twice.
3. Press the key. The
blue ring flashes twice.
4. Press the number key
for the combination
that matches your home
theater (see step 1). The
blue ring flashes twice.
That’s it! You’re ready to use One For All SmartControl to
control your home theater when you listen to music. To find
out how to use One For All SmartControl, see the Using One
For All SmartControl section on page 12.
To set up Listen to Music settings:
1. Find the combination below that matches the devices
you use when you listen to music in your home theater.
1AUDIO and MEDIA
2AUDIO and DVD
3AUDIO and DVRAUX
4AUDIO
 &OREXAMPLEIFYOUUSEAMEDIASERVERTOSTOREAND
playback music and your audio receiver to control
volume, you should use combination 1. If you use a DVD
player to play music and an audio receiver to control
volume, use combination 2.

12
TV
SAT/CBL/DTC
SAT/CBL/DTC
SAT/CBL/DTC
TV
So, if you’re watching TV and you use the satellite receiver to
change channels and the TV to change volume, the channel
keys are “locked” to your satellite receiver and the volume
keys are “locked” to your TV—you don’t have to do anything
to switch between them. They automatically operate the
right device. You won’t mistakenly change channels on the
TV!
5SING/NE&OR!LL3MART#ONTROL
Once you’ve set up the remote for your home theater, you
can use One For All SmartControl to control the right devices
automatically whenever you want to watch TV, watch
movies, or listen to music. All you have to do is press a key!
4OUSE/NE&OR!LL3MART#ONTROL Press the key for the
activity you want to do with your home theater.
Press to watch TV.
Press to watch movies.
Press to listen to music.
The keys to control different parts of your home theater
automatically control the right devices for what you’re doing
right now.
4HEDIAGRAMHERESHOWSANEXAMPLEOFHOW/NE&OR
All SmartControl works for the Watch TV activity (using
configuration 1; see page 9 for details on different
configurations).

13
English
One For All SmartControl also
makes it easy to adjust your home
theater devices so that you’re
watching and listening to the
right signal. The HELP keys directly
below the activity keys automatically switch the inputs on
the devices you use to watch and listen to movies, TV, or
music.
3OFOREXAMPLEIFYOUHAVEA$6$PLAYINGTHATYOUWANTTO
watch, but you don’t see the picture on your TV, the One For
!LL3MART#ONTROL!UDIO6IDEO(ELPKEYSMAKEITEASYTOlX
One For All SmartControl Audio/Video Help Keys
4OUSETHEAUDIOVIDEOHELPKEYS
1. Make sure you’re in the right One For All SmartControl
mode—press the One For All SmartControl key
corresponding to the activity you’re using (watch TV,
watch movie, or listen to music).
2. Press the help key for the signal you’re missing.
 )FYOURENOTHEARING
THERIGHTAUDIO press
the AUDIO help key. If
you still don’t hear the
audio you want, press the
AUDIO help key again.
You might need to press
this key several times to
find the right signal.
)FYOURENOTSEEING
THERIGHTVIDEOpress
the VIDEO help key. If
you still don’t see the
video you want, press the
VIDEO help key again.
You might need to press
this key several times to
find the right signal.
If the Audio/Video Help keys aren’t working...
You might need to customize them for your devices. Different
home entertainment devices handle inputs in different ways,
and not every device will respond to the default commands
the SmartRemote sends to switch inputs.
4OCUSTOMIZETHEHELPKEYSFORYOURDEVICES
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press the key for the activity you’re having problems
WITH&OREXAMPLEIFAHELPKEYDOESNTWORKWHEN
you’re watching TV, press the key.
3. Press the help key that’s not working (AUDIO or
VIDEO). The blue ring flashes twice to confirm you’ve
customized it for your device.
If the help keys don’t work when you’ve customized them
for your devices, and you’d like to change the audio/
video help keys back to their regular input commands, just
perform the steps 1–3 again. The help keys go back to their
default commands.
Note: If the help keys are going to the wrong A/V input(s)
(or if they’re doing something other than changing inputs)
you may be using the wrong code. Repeat the One For All
SimpleSet procedure or try the next code within the Direct
Code Set Up procedure.

14
One For All SmartControl Master Power
One For All SmartControl also lets you turn all the devices
you use in an activity on and off with a single key press. For
EXAMPLEIFYOUUSEYOUR46ANDSATELLITERECEIVERTOWATCH
TV, all you have to do is press and hold the -ASTER key
for 2 seconds to turn these devices on or off once you’ve
pressed the key for the watch TV activity.
4OUSE/NE&OR!LL3MART#ONTROL-ASTER0OWER
1. Make sure you’re in the right One For All SmartControl
mode—press the One For All SmartControl key
corresponding to the activity you’re using (watch TV,
watch movie, or listen to music).
2. Point the remote control
at the devices and press
the -ASTER key for
at least 2 seconds.
NOTES
Your devices turn on or off in the order of the
combination listed in the One For All SmartControl setup.
After the master power sequence has been completed,
the remote control will be able to send other commands.
If one or more devices does not have a POWER key, the
power off/on sequence may be slightly delayed when the
remote control signals the device(s). This action is normal.
If you need to individually power devices on or off, select
that device (using the left or right device key) and press
the POWER key.
Excluding a device from Master Power
You can keep devices separate from the One For All
3MART#ONTROL-ASTER0OWERCOMMANDFOREXAMPLEIFYOU
want to turn your TV on and off by itself, independently of
your watch TV or watch movie activity.
4OEXCLUDEADEVICEFROMMASTERPOWER
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press the key for the activity you want to modify.
&OREXAMPLEIFYOUWANTTOTURNADEVICEONANDOFF
independently when you’re watching TV, press the
key.
3. Use the device selection keys to highlight the device
you want to turn on/off independently.
4. Press .
This device will no longer be turned on or off by the master
power command in this activity.
If you want to include the device in One For All
SmartControl Master Power again, just repeat steps 1–4.

15
English
!DVANCED&EATURES
The One For All SmartControl Remote is customizable to
almost any home theater setup. It can learn new commands
from your original remote controls and condense multi-step
actions to a single key press. This section tells you how to
customize the following features of the remote:
s 6OLUMELOCK
s ,EARNING
s -ODEREASSIGNMENT
s -ACROS
s #ODEVERIlCATION
s /PERATIONALRESET
6OLUME,OCK
Volume lock lets you set the remote’s volume controls
(volume up/down and mute) to operate the same device
YOUR46FOREXAMPLEREGARDLESSWHICHDEVICEMODETVDTC
SATCBLDVDAUDIOMEDIAANDDVRAUXISSELECTED
4OLOCKVOLUMECONTROLSTOONEDEVICE
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 3. The blue ring flashes twice.
3. Use the device select keys to highlight the device you
WANTTOLOCKVOLUMETO&OREXAMPLEIFYOUWANTTHE
volume controls to always operate the TV, select TV.
4. Press the SETUP key to save your settings. The blue ring
flashes twice.
The remote’s volume controls are now locked to the device
you selected in step 3. No matter which mode you’re in, the
volume keys and mute will always control this device.
4OTURNVOLUMELOCKOFF
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 3. The blue ring flashes twice.
3. Press (volume up). The blue ring flashes 4 times.
The remote’s volume controls will now operate the active
device (if that device has volume controls).
4OREMOVEADEVICEFROMVOLUMELOCK
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 3. The blue ring flashes twice.
3. Use the device select keys to highlight the device you
WANTTOREMOVEFROMVOLUMELOCK&OREXAMPLEIF
you want to control the volume of your audio receiver
separately, select AUDIO.
4. Press (volume down). The blue ring flashes 4 times.
The device you removed from lock will send out its volume
controls independently.

16
,EARNING
Learning lets you copy one or more functions from your
ORIGINALREMOTECONTROLTOTHISREMOTE&OREXAMPLEIFYOUR
audio receiver remote has a key that this remote doesn’t
have, you can copy (or learn) that key from the original
remote to this one.
Before You Start
s 9OURORIGINALREMOTECONTROLSMUSTBEINWORKINGORDER
for learning to work properly.
s ,EARNEDKEYSAREMODESPECIlCSOEACHKEYCANSTOREA
unique function for each mode.
s ,EARNEDKEYSCANBEUSEDINMACROSSEEh5SING
Macros”).
s $ONOTUSETHEFOLLOWINGKEYSFORLEARNINGSETUP or
2ECORDs+EY
s ,EARNINGCAPACITYISAPPROXIMATELYKEYSDEPENDING
on the individual functions being learned.
s .OTALLKEYSCANBELEARNED3OMEREMOTESHAVEKEYS
that use commands that are incompatible with this
remote.
s &OROPTIMUMLEARNINGAVOIDHIGHLEVELSOFAMBIENTLIGHT
such as natural sunlight or energy-efficient fluorescent
lights.
NOTE: Please have your original remote controls handy
before programming learning. Be sure to press each
teaching key within 5 seconds of the previous entry.
Otherwise, this remote exits the learning mode.
4OLEARNFUNCTIONSFROMYOURORIGINALREMOTES
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 7 5. The blue ring flashes twice.
3. Use the device select keys to highlight the kind of device
YOUWANTTOUSEWITHTHELEARNEDFUNCTION&OREXAMPLE
if you want learn a function to use with your audio
receiver, select AUDIO.
4. Place both remote controls on a flat surface. Make sure
that the ends you normally point at your device are
facing each other. The remotes should be 1–2 inches from
each other.
1–2
inches
5. Press the key on the One For All SmartControl remote
you want to use for the learned function. The indicator
for the device you chose in step 3 flashes rapidly.
 &OREXAMPLEIFYOUWANTTOUSETHEREDKEYFORTHENEW
function, press the red key.
6. Press the key on the original remote you want to learn.
The blue ring on the One For All SmartControl remote
flashes twice to confirm that you’ve learned the function.
To copy other functions within the same mode, repeat
steps 5 and 6, using a different key on the One For All
SmartControl remote.

17
English
7. Press and hold the SETUP key to save your settings. The
blue ring flashes twice.
The key(s) on the SmartRemote you pressed in step 5 will
NOWEXECUTETHEFUNCTIONSYOULEARNEDFROMYOURORIGINAL
remote.
4ODELETEALEARNEDFUNCTIONANDRESTOREAKEYS
ORIGINALFUNCTION
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 7 6. The blue ring flashes twice.
3. Use the device select keys to highlight the device mode
where the learned function is stored.
4. Find the key with the learned function. Press it twice to
restore its original function.
-ODE2EASSIGNMENT
If you need to control a second TV, VCR, DVD player, or other
device, you can reassign one of the One For All SmartControl
remote’s device modes to control that kind of device.
&OREXAMPLEIFYOUWANTTOCONTROLASECOND46CHOOSEA
DEVICEMODEYOURENOTALREADYUSINGLIKEDVRAUXIFYOU
don’t have a separate DVR). Then follow the instructions
here to use that device mode to control your second TV.
4OREASSIGNADEVICEMODE
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 2. The blue ring flashes twice.
3. Use the device select keys to highlight the kind of device
YOUWANTTOUSEFORTHISDEVICEMODE&OREXAMPLEIFYOU
want to use this device mode for a second TV, highlight
TV.
4. Press the SETUP key.
5. Use the device select keys to highlight the device mode
YOUWANTTOCHANGE&OREXAMPLEIFYOUWANTTOUSETHE
DVRAUXMODEFORASECOND46HIGHLIGHTDVRAUX.
6. Press the SETUP key. The blue ring flashes twice.
This device mode is ready to be used for the new device type.
Now follow “One For All SimpleSet”, “Direct Code Setup” or
the“ Code Search” to program your the remote to operate
the device.
4ORESETADEVICEMODETOITSORIGINALDEVICETYPE
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 2.
3. Use the device select keys to highlight the device mode
YOUWANTTORESETTOITSORIGINALDEVICETYPE&OREXAMPLE
TORESETTHEDVRAUXMODETOCONTROLA$62HIGHLIGHT
DVRAUX.
4. Press the SETUP key twice. The blue ring flashes twice.
This device mode is ready to be used for its original device
type. Now follow “One For All SimpleSet”, “Direct Code
Setup” or the“ Code Search” to program your the remote to
operate the device.

18
-ACROS
The One For All SmartControl remote can condense multi-
step activities to a single keypress. These are called “macros”.
&OREXAMPLEYOUCOULDMAKETHEONDEMAND key perform
a series of steps when you’re finished watching a DVD: (1)
stop the DVD, (2) turn the DVD player off, and (3) turn your
TV off.
Note: A macro can contain up to 15 steps.
4OSETUPA-ACRO
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 5. The blue ring flashes twice.
3. 0RESSTHEKEYYOUWANTTOUSETOEXECUTETHEMACRO
 &OREXAMPLEIFYOUWANTTHEONDEMAND key to trigger
the steps to stop a DVD, turn the DVD player off, and
turn off the TV, press the ONDEMAND key in this step.
4. Use the device select keys to highlight the device mode
for the first step in the macro.
 &OREXAMPLEIFTHElRSTSTEPISTOSTOPA$6$HIGHLIGHT
DVD.
5. Press the key for the first command in the sequence.
 &OREXAMPLEIFTHElRSTSTEPISTOSTOPA$6$PRESSTHE
(stop) key.
6. If there are more commands for this device, press the
KEYSFORTHENEXTCOMMANDS)FTHEREARENTGOTOSTEP
7.)
 &OREXAMPLEIFYOUWANTTOTURNTHE$6$PLAYEROFFAFTER
you stop the disc, press the key.
When you’re finished with commands for this device, go
to step 7.
7. Use the device select keys to highlight the device mode
FORTHENEXTDEVICEYOUWANTTOUSEINTHEMACRO
 &OREXAMPLEIFTHENEXTSTEPINTHEMACROISTOTURNOFF
the TV, highlight TV.
8. 0RESSTHEKEYFORTHENEXTCOMMANDINTHESEQUENCE
 &OREXAMPLEIFTHENEXTSTEPISTOTURNOFFTHE46PRESS
the key.
9. If there are more commands for this device, press the
KEYSFORTHENEXTCOMMANDS
If you’re finished with this macro, go to step 10.
If you want to use another device in this activity, repeat
steps 7 and 8.
10.Press and hold the SETUP key until the blue ring flashes
twice.
Congratulations! You have successfully programmed a macro.
Now when you press the key you designated as this macro
key, the remote will send the steps you programmed.
4OUSEAMACRO
1. Make sure the remote is pointed at the devices this
macro uses.
2. Press the key you designated for the macro.
Leave the remote pointed at the devices for several
seconds. The macro may take a few seconds to finish.

19
English
#HECKINGTHE0ROGRAMMED#ODES
The One For All SmartControl remote uses different codes
to control different devices. You can set up those codes by
using One For All SimpleSet, Direct code setup, or the Code
search. If you ever need to find out what code you’re using
to control a different device, follow the steps below.
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Use the device select keys to highlight the device whose
CODEYOUWANTTOCHECK&OREXAMPLETOlNDTHE46
code, highlight TV.
3. Press 9 9 0. The blue ring flashes twice.
4. Press 1and count how many times the blue ring flashes.
This is the first digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
5. Press 2and count how many times the blue ring flashes.
This is the second digit of your code—write it down in
the space below. Note: If the blue ring does not flash at
all, the digit is “0”.
6. Press 3and count how many times the blue ring flashes.
This is the third digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
7. Press 4and count how many times the blue ring flashes.
This is the fourth digit of your code—write it down in the
space below. Note: If the blue ring does not flash at all,
the digit is “0”.
8. To check the codes of other devices, repeat steps 1–7 and
highlight a different device in step 2.
tv
sat/cbl/dtc
dvd
media
audio
DVRAUX
4OCLEARAMACROANDGOBACKTOTHEKEYSORIGINAL
FUNCTION
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 9 5.
3. Press the macro key you want to clear.
4. Press and hold the SETUP key until the blue ring flashes
twice.
The macro you programmed to this key is now cleared, and
the key goes back to its original function.

20
4ROUBLESHOOTING
The ONE FOR ALL is not performing commands
properly.
You may be using the wrong code.
s )FYOUUSED/NE&OR!LL3IMPLE3ET2EPEAT/NE&OR!LL
SimpleSet (see the 1-2-3 Programming guide).
s )FYOUUSED$IRECT#ODE3ETUP4RYTHENEXTCODELISTEDFOR
your brand (see page 4).
s )FYOUUSEDTHE#ODE3EARCHMETHOD3TARTTHESEARCH
again to locate the proper code (see page 5).
My brand is not listed in the Code List.
Try the Code Search.
The device indicator is dim or doesn’t light up at all.
Replace batteries with four new AAA alkaline batteries.
The device indicator blinks when I press a key, but
home entertainment device does not respond.
Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet away.
The unit does not control home entertainment devices
or commands are not working properly.
Try One For All SimpleSet programming again. If the remote
STILLDOESNTCONTROLYOURDEVICETHEWAYYOUEXPECTTRYTHE
$IRECT#ODE3ETUP+EEPTRYINGCODESFROMTHECODELISTUNTIL
you find the one the controls your device the way you want
it to.
The One For All SmartControl keys aren’t working with
my home theater.
You must set up the One For All SmartControl remote to
work with your home theater before you can use these keys.
See page 9 for more information.
The audio/video help keys don’t work with my home
theater.
Make sure you’re in One For All SmartControl mode (press
one of the activity keys to make sure). The audio/video
help keys work in One For All SmartControl mode only. If
these keys still don’t work, you might need to set up One
For All SmartControl (see page 9), reconfigure One For All
SmartControl (see page 9), or reconfigure the way the help
keys work (see page 13).
The channel, volume, or playback keys are controlling
the wrong device in One For All SmartControl mode.
You might need to reconfigure One For All SmartControl. See
page 9 for more information.
2ESETTINGTHE2EMOTE
Resetting the remote erases all macros, volume lock, One For
All SmartControl setup information, and learned functions.
4ORESETTHEREMOTE
1. Press and hold the SETUP key until the blue ring flashes
twice.
2. Press 9 8 0. The blue ring flashes twice.