One Forall LITE URC-2589 User manual

Retain For Future Reference
“LITE”
USER GUIDE & CODE BOOK
Universal Remote
URC-2589

ABOUT YOUR ONE FOR ALL LITE 3
THE KEYPAD 5
INSTALLING THE BATTERIES 7
SETTING UP THE LITE
Setting Up Your Device 8
Using the AUX Key 9
ADVANCED FEATURES
Reassigning the Device Keys 10
Teletext and Fastext 11
The Lite Key 11
Menu Control 12
Controlling Colour and Brightness 13
Punch-Through 14
Preventing Accidental Code Changes 14
TROUBLE-SHOOTING
Searching for Your Code 15
Code Blink Out 16
Helpful Hints 17
Consumer Help-Line 18
SET-UP CODES
Quick Code Reference 19
Televisions 20
Video Recorders 23
Satellite Receivers 25
Cable Converters 27
2
Table of Contents
Note: If you’re having problems operating all the
functions of your device, don’t worry, your ONE FOR ALL
may just need customising for your model type. Just call
our consumer help-line and we’ll get you on the right track.

Your ONE FOR ALL Lite Package contains:
Your ONE FOR ALL Lite Remote
Your ONE FOR ALL Lite Manual
Your manual is divided into two parts: set-up instructions and
device codes. You will need your manual to set up your new
ONE FOR ALL Lite so please be sure to keep it.
Your ONE FOR ALL Lite needs four new AAA/LR03 alkaline
batteries.
Your ONE FOR ALL Lite can operate four devices:
a Television, a Video Recorder, a Satellite Receiver and
a second Television, Video or Satellite Receiver. Your ONE FOR
ALL Lite can also operate Cable Converters.
3
About Your ONE FOR ALL Lite

4
Device
Keys
Mute
Volume
-/-- Key
Rewind
Record
Stop
Pause
Fast Forward
Magic
Menu
Channel
Lite Key
Power
LED
Number
Keys
Teletext Keys
Play
About Your ONE FOR ALL Lite

Key Function
LED LED
The LED (Light Emitting Diode) flashes red
to show the remote is working.
Power
The Power key controls the same function as
on your original remote.
Device Keys
The TV, VCR, SAT and AUX keys select the
home entertainment device to be
controlled. For example pressing the TV key
allows the remote to control the functions
of your Television, after pressing VCR you
can operate your Video Cassette Recorder
and the SAT key operates your Satellite
Receiver or Cable Converter. The AUX key
operates a second Television, Video Recorder
or Satellite Receiver.
Lite Key
The Lite key allows you to illuminate the
entire ONE FOR ALL keypad at the press of a
button. See page 11 for more details.
Volume, Programme
The Volume and Programme keys control
the two most frequently used functions of
your Television and Satellite Receiver. They
operate just as those on your original remote.
These keys are also used to operate menu
feature of your device. See page 13 for
more details.
Mute
The Mute key operates the same function it
did on your original remote.
MAGIC Key
The MAGIC key is used to set up your ONE
FOR ALL Lite and to access special functions.
Number Keys
The Number keys (0-9, 10, 20) provide
functions just like your original remote, such
as direct access programme selection. If your
original remote uses one/two digit input
switching (-/-- symbol), this function can be
obtained by pressing the -/-- key, which is the
same as the 10 key.
5
Stop
Fast Forward
Menu
Channel
Lite Key
Power
LED
Teletext Keys
The Keypad
0
9
10
20
-/--

Key Function
Video Recorder Keys
After pressing the VCR key, the Video
Recorder keys operate the functions of your
Video Recorder. To prevent accidental
recording, the Record key must be pressed
twice to start recording.
Teletext Keys
After pressing the TV key, the Rewind and
Fast Forward keys are used to operate the
main teletext functions. The symbols below
the keys are for teletext. The Text keys are
used to access the teletext functions of your
Television. Of course, your Television must be
teletext capable. For an explanation of the
teletext symbols, please refer to page 11 of this
manual. For a detailed explanation on how
teletext works, please refer to the manual
of your Television set.
After pressing the TV key, the Video
Recorder keys marked red, green, yellow
and blue, allow you to access the fastext
functions of your television. Again, your
television must be fastext capable to
operate these functions. For a more detailed
explanation of teletext and fastext, please
refer to the manual of your television set.
6
(red)
(blue)
(yellow)
(green)
The Keypad

Your ONE FOR ALL Lite needs four new AAA/LR03 alkaline
batteries.
Remove the battery cover from the back
of your ONE FOR ALL Lite.
Match the batteries to the + and - marks
inside the battery case, then insert the
batteries.
Press the battery cover back into place.
7
Installing the Batteries
Note: In order to avoid having to reprogramme your ONE
FOR ALL after you remove the batteries, you will need to
insert new batteries within 3 minutes. Also it is best that
you do not use rechargable batteries.
2
3
1

Setting Up Your Device
To set up the ONE FOR ALL Lite for your Device:
Find your Television code in the
Set-Up Code section (starting on page
20). Codes are listed by brand name. The
most popular code is listed first. Make
sure your Television is switched on.
Press and release your ONE FOR ALL
Lite's TV key, then press and hold
down the MAGIC key until the red
light blinks twice (the light will blink
once then twice).
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
Now, aim your ONE FOR ALL Lite at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL Lite is ready to run your Television.
Write your code in the three boxes on page 19, for quick, easy
reference.
To control your Television, press TV first.
8
Setting Up The Lite
1
2
4
3
Important notes:
- To set up your Video Recorder or Satellite, follow the
same instructions above, only press the VCR or SAT key
during step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.
- If your Television, Video or Satellite does not respond,
follow steps 1 through 4 with each code listed for your
brand. If none of the codes listed for your brand operate
your device, then try the search method described on
page 15, even if your brand is not listed at all.
- If you change programmes on your Television through
your Video Recorder, press VCR and not TV, before you use
the programme keys.
- If your Video’s original remote control does not have a
POWER key, press PLAY instead of POWER when searching
for your code.

Using the AUX Key:
The AUX key on your ONE FOR ALL Lite can be used to control
a second Television, Video Recorder or Satellite Receiver.
To set up the AUX key to control a second TV:
Press and hold down the MAGIC key
until the red light blinks twice (the light
will blink once, then twice).
Press 9 9 2 TV AUX.
Find your Television code in the Set-Up
Code section (starting on page 20). Codes
are listed by brand name. The most
popular code is listed first. Make sure
your Television is switched on.
Press and release your ONE FOR ALL
Lite's AUX key, then press and hold
down the MAGIC key until the ONE
FOR ALL Lite's red light blinks twice.
Enter your three-digit TV code using
the number keys. The red light will blink
twice.
Now, aim your ONE FOR ALL Lite at your
Television and press POWER. If your
Television switches off, your ONE FOR
ALL Lite is ready to run your Television.
When you want to control your second
TV, press AUX first.
9
Setting Up Your Device
1
2
3
4
5
6
Important notes:
- To set up your Video Recorder or Satellite, follow the
same instructions above, only press the VCR or SAT key
during step 2.
- To set up your Cable Box, follow the instructions above
only press the SAT key during step 2.
- If you change programmes on your Television through
your Video Recorder, press VCR and not TV, before you use
the programme keys.
- If your Video’s original remote control does not have a power
key, press PLAY instead of POWER during step 6.

Changing the Device Keys
If you want, you can change any of the device keys (TV, VCR,
SAT or AUX) to operate another type of device. The chart
below lists how to change the keys and to set up that device:
To Change: Press:
to MAGIC*992 VCR TV,
then TV MAGIC*Code
to MAGIC*992 SAT TV,
then TV MAGIC*Code
to MAGIC*992 TV VCR,
then VCR MAGIC*Code
to MAGIC*992 SAT VCR,
then VCR MAGIC*Code
to MAGIC*992 TV SAT,
then SAT MAGIC*Code
to MAGIC*992 VCR SAT,
then SAT MAGIC*Code
to MAGIC*992 TV AUX,
then AUX MAGIC*Code
to MAGIC*992 VCR AUX,
then AUX MAGIC*Code
to MAGIC*992 SAT AUX,
then AUX MAGIC*Code
* Hold down the MAGIC key until the red light blinks twice.
To reset a device key to its original function, press:
TV key * 992 T V T V
VCR key * 992 V C R V C R
SAT key * 992 S A T S A T
AUX key * 992 A U X A U X
* Hold down the MAGIC key until the red light blinks twice.
10
Advanced Features
SAT
MAGIC
MAGIC
MAGIC
MAGIC
SAT
SAT
SAT
SAT
SAT
SAT