9oneida-air.com
Assembly Instructions (Continued)
FIG. 6
6 If you did not purchase the Leg Extensions,
proceed to Step 9.
e Leg Extensions must be positioned at
the correct clearance height for your waste
containment and lter setup [FIG. 6].
. Position 1: For 35 gallon drum with
Universal Drum Dolly.
. Position 2: For 55 gallon drum and/or
Stacking Sound Filter.
. Position 3: For 55 gallon drum, Universal
Drum Dolly, and/or Stacking Sound Filter.
Note: Finger tighten only at this time. We
recommend that the leg extensions be assembled
laying down and then raised into position later
on.
7 Using the previously selected positioning
holes, align the Lower Leg (A) and the Leg
Extension (G) as well as the Mid Brace (B) in
the lower hole. read two Carriage Bolts (F1)
to hold it in place [FIG. 7a]. Secure with two
Washers (F2), and two Nylock-Nuts (F3) [FIG.
7b].
Note: Finger tighten only at this time. We
recommend that the leg extensions be assembled
laying down and then raised into position later
on.
FIG. 7b
FIG. 7a
A
G
B
Position 1
Position 2
Position 3
