4
AC adaptor Jack (J1): Accepts connection of an
external AC adaptor.
AC adaptor Jack (J2): Used to distribute the voltage
to your pedal chain.
Input Jack: Connect your instrument cord or the ouput
of another effect pedal if you are linking pedals together.
Output Jack: This output jacks will deliver the
effected sound to your amplifier, or to an input jack of
another effect.
Send Jack: Send the instrument signal to an external
effect loop.
Return Jack: Receive an external signal from an
external effect loop.
Pedal: Depress to turn on/off the pedal.
Level: Adjusts the level of the RETURN jack. The center
position is set to 0 dB. Turning it to the left decreases
the total volume and turning it to the right increases the
total volume up to 15 dB (max).
Treble: Adjusts the amount of treble of the RETURN
jack. Turning it to the left decreases the treble amount
and turning it to the right increases the treble amount.
Led Indicador: Indicates the pedal status.
When led is green, the power supply is okay and
indicates your BL-1 is under bypass mode.
When led is red, your instrument signal is being sent to
an external looping effect.
Pedal Descriptions
