Onkyo UWF-1 User manual

Getting Connected
UWF-1
Wireless USB LAN Adapter
Manual Setup
Auto Setup
Wireless Setup
Manual Setup (View Network)
Auto Setup (Select from Router)
Wireless Setup
Manual Setup
sample network name
sample network 2
sample network 3
Manual Setup
Choose “Manual Setup (View Network)”
Choose your network
Display Screen Diagrams
Choose Manual Setup if your system requires a Security Code
to connect, or choose Auto Setup if your router has Automatic
Security Setup (WPS).
ENTER
Manual or Auto Setup?
Use your receiver’s remote control or front panel controls
to navigate the display menu choices.
Refer to the display screen diagrams at left and
below for help implementing your UWF-1’s wireless
capacity. Further details are in your UWF-1’s manual.
Connect the UWF-1 to the USB port on your network-capable
Onkyo receiver; Press USB on the receiver’s faceplate to
select USB input.

SSID : *****
Security : WEP
Key :
Default Key ID:
OK
Choose “Key”to type in Password
SSID : *****
Security : WPA
Key :
OK
WEP or WPA?
Choose “Key”to type in Password
Your wireless LAN security setting will automatically show as WEP or WPA.
Follow appropriate directions below, depending on which (WEP or WPA) shows on your display.
WEPWPA
Manual Setup Manual Setup
Manual Setup
Enter Wireless Password.
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 - = `
[ ] / : “ < > ? Back Space OK
a
Manual Setup
Enter Wireless Password.
a b c d e f g h i j k l m
n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0 - = `
[ ] / : “ < > ?
Back Space OK
a
a
SSID : *****
Security : WEP
Key : ***** (your password)
Default Key ID:
OK
Password shows up next to “Key”
Now select “Default Key ID”
SSID : *****
Security : WPA
Key : **** (your password)
OK
Password shows up next to “Key”
Now select “OK”
Manual Setup Manual Setup

1
2
3
4
Select Number
(Most common setting is #1.)
Now Connecting
Connecting . . .
Manual Setup Manual Setup
SSID : *****
Security : WEP
Key : ***** (your password)
Default Key ID: 1
OK
Default Key ID shows “1.”
Now select OK.
Connected.
Now Connecting
Connecting . . .
Manual Setup
Manual Setup
SSID: (your network name)
Security: (WPA)
Signal: (%)
Status: Connected
Refresh
Back
Status
SSID: (your network name)
Security: (WEP)
Signal: (%)
Status: Connected
Refresh
Back
Status
WEP WPA

Auto Setup works only with a router that has
Automatic Security Setup (WPS).
Auto Setup
Select “Press button” and then press ENTER
Press Button
PIN Code
Auto Setup
Press Button
PIN Code
Auto Setup
Manual Setup
Auto Setup
Wireless Setup
Connect the UWF-1 to the USB port on your network-capable Onkyo
receiver; Press USB on the receiver’s faceplate to select USB input.
ENTER
Use your receiver’s remote control to navigate the display
menu choices.
Select “Auto Setup”
Press button or PIN code method
Your wireless LAN security settings will require one of these methods. Follow appropriate
directions below, depending on which method your wireless LAN security settings require.
Select “PIN Code”and then press ENTER
OK
OK
Press Button PIN Code

Please select “OK” after pushing WPS button of the
Access Point.
Auto Setup
Connected.
PIN Code: ######
Please select “OK”after inputting this PIN Code
Access Point.
Auto Setup
OK
For information on the registration process, please refer
to the instruction manual provided with your Access
Point device.
Connecting . . .
Connecting . . .
Connected.
Auto Setup
Connecting . . .
Connecting . . .
Auto Setup
OK
Now Connecting Now Connecting
SSID: (your network name)
Security: ( )
Signal: (%)
Status: Connected
Refresh
Back
Status
SSID: (your network name)
Security: ( )
Signal: (%)
Status: Connected
Refresh
Back
Status
Press Button PIN Code