OnSky DreamBe User manual

Quick Guide
(Version 1.2)
DreamBe™
Continuous & Contactless Health Monitor for Babies
Peace of Mind for Parents
(OH-DreamBe -1)

DISCLAIMER
01
OnSky Health
NOT A MEDICAL DEVICE. THE PRODUCTS ARE NOT MEDICAL DEVICES AND ARE
NOT INTENDED TO BE USED AS MEDICAL DEVICES, AND ARE NEITHER REGULATED
NOR APPROVED BY THE U.S. FOOD AND DRUG ADMINISTRATION. THE PRODUCTS
ARE NOT DESIGNED TO DETECT, DIAGNOSE, PREVENT, TREAT OR CURE ANY
DISEASE OR OTHER MEDICAL CONDITION. THE PRODUCTS AND SERVICES ARE
NOT A SUBSTITUTE FOR MEDICAL TREATMENT OR ADULT SUPERVISION AND CARE.
YOU ACKNOWLEDGE, UNDERSTAND, AND AGREE THAT YOUR USE OF THE
SERVICES AND THE PRODUCTS IS ENTIRELY AT YOUR OWN RISK.
v1.2 October 2022 OnSky Health Copyright © 2022

The OH-DreamBe -1 consists of the following devices:
02
OnSky Health
The Health Display The Pad
OH-DreamBe-1
v1.2 October 2022 OnSky Health Copyright © 2022

1. OnSky Health App
03
OnSky Health
OnSky Health
For Android devices, please
download “OnSky Health” app
on Play Store.
For iOS devices, please download
“OnSky Health” app on Apple Store.
v1.2 October 2022 OnSky Health Copyright © 2022

2. Positioning Pad
04
OnSky Health
Option 1: Put Pad on top of pillow.
Place the Pad on the mattress
above head level, on top of pillow.
Option 2: Put Pad under pillow.
Put a pillow on top of the bed sheet and the Pad.
Note about Orientation: The USB cable should be on
the top of the Pad (top of bed).
Place the Pad on the mattress at head level.
Put a bed sheet over the mattress and also
cover the Pad.
v1.2 October 2022 OnSky Health Copyright © 2022

05
OnSky Health
User can cover Pad with bed sheet.
Distance between the Pad and
body should be less than 2 feet as
recommended.
Option 3: Put Pad next to pillow.
Place the Pad under mattress at
head level.
Option 4: Put Pad under mattress.
v1.2 October 2022 OnSky Health Copyright © 2022

3. Connect Power Adapter and USB
06
OnSky Health
Connect the Pad to the Health Display through USB port.
The Health Display can be placed on the wall or on a nightstand for easy
access (as shown in the above image)
Connect power adapter to wall outlet, then connect it to Health Display
to power it up.
USB Cable
Power Cable
v1.2 October 2022 OnSky Health Copyright © 2022

4. Register Account
07
OnSky Health
(Note: Skip this step if there is user ID and password in the back of the Health Display)
For first-time user, you have to register an account.
Open the “OnSky Health” app.
Click “Register” on the app.
Fill out your account information:
a. First Name.
b. Last Name.
c. Email: your email address.
d. Password: make sure to write it down somewhere to remember
in the future.
e. Confirm Password.
Read the Terms and Conditions, then check on
“I accept the agreement” to agree.
Click on “Sign Up”, this completes the account registration.
v1.2 October 2022 OnSky Health Copyright © 2022

08
OnSky Health
v1.2 October 2022 OnSky Health Copyright © 2022

5. Log in
09
OnSky Health
To log in, you need to get to the Log-In page above. You can also get out of
the app and then re-open the “OnSky Health” app.
Enter the email address and password.
(Note: the email address that you entered for registering account is section above.
If User ID and password are labeled in the back of the Health Display, then use them.)
Then click “Log In”.
v1.2 October 2022 OnSky Health Copyright © 2022

6. Add DreamBe to Account
10
OnSky Health
(Note: Skip this step if there is user ID and password in the back of the Health Display)
Once the user logs in to the account, on the Device page, click “+” => Enter the
last 5 digits which are labeled at the back of the Health Display => Click “Finish”
=> Click “OK”.
v1.2 October 2022 OnSky Health Copyright © 2022

7. Connecting WIFI network
11
OnSky Health
Use a pen or pencil to press the button “WIFI CONFIG” at the bottom of the Health Display.
The WIFI’s light becomes orange.
Use OnSky Health app on your mobile device.
Click on “Setting” at the bottom right of home page.
v1.2 October 2022 OnSky Health Copyright © 2022

12
OnSky Health
Click on “WIFI”.
v1.2 October 2022 OnSky Health Copyright © 2022
Settings Button

Enter password of your WIFI router
=> press “CONFIRM/CANCEL” then
wait for WIFI connection.
(Note: Use 2.4Ghz WIFI of your
router because the Health Display
only supports2.4Ghz)
13
OnSky Health
v1.2 October 2022 OnSky Health Copyright © 2022

When WIFI is successfully connected to the Health Display, a message
will pop up and you will see a blue light at the bottom of the Health
Display. If you see red light, then you can wait at least 3 minutes and
repeat the steps above
14
OnSky Health
Blue light
v1.2 October 2022 OnSky Health Copyright © 2022

8. Calibration
15
OnSky Health
Go to Settings on Health Display, Click on “Calibration”.
First Calibration: Click on “Empty Bed”. Follow the instructions.
Note: leave the bed empty without any person or pet. When you hear a beep,
it means the First Calibration is done.
Second Calibration: Click on “User Laying on Pillow”. Follow the instructions.
Lay down on pillow, breath normally, stay still, and do not talk. It will take
about 1 minute to finish. When you hear a beep, then the Second Calibration is
completed.
v1.2 October 2022 OnSky Health Copyright © 2022

9. User Information
16
OnSky Health
Go to “Settings” on the App,
Click on “User Information”.
Fill out the user information:
First name and Last name.
Other information is optional.
Click “Save” then “Next”.
v1.2 October 2022 OnSky Health Copyright © 2022

10. Urgency Information (for first responders)
17
OnSky Health
Go to “Settings” on the App, click on “Urgency”.
Fill out all the names and telephone numbers. You can enter up to 3 people
as first responders. For each person, click the “Save” icon as shown below.
v1.2 October 2022 OnSky Health Copyright © 2022

11. Config Sync Display
18
OnSky Health
This is to synchronize your Health Display with your cell phone.
Go to Settings on your app. Click on “Config Sync Display”, then click on “Sync”.
v1.2 October 2022 OnSky Health Copyright © 2022

12. Add more DreamBe
19
OnSky Health
If you have more than one DreamBe set (for multiple family members),
you can put them into one account for easy access.
Log in to the “OnSky Health” app (follow step 5 above).
Add another DreamBe (follow step 6 above).
Connecting WIFI network for this DreamBe by following step 7 above.
This DreamBe will share the same User Information and Urgency information
as the first DreamBe, but data will be independent and separated.
v1.2 October 2022 OnSky Health Copyright © 2022