ONV PSE3101AC User manual

USER GUIDE
POE & Optical Transmission
International Standard Intelligent POE injector

Statement
Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd
All Rights Reserved
®
!
Packing List
Please kindly check the following items:
1. POE injector 1 piece
2. Power cable 1 piece
3. Machine parts 1 set
4. User Manual /Warranty Card/conformity certificate
Note
If any shortage or damage found, please contact us in time.
This document contains proprietary information that is protected by copyright. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written
permission of Optical Network Video Technologies (Shenzhen) Co., Ltd.
is the registered trademark of Optical Network Video Technologies (Shenzhen) Co., Ltd. The information
and product specifications within this document are subject to change at any time, without notice and without obli-
gation to notify any person of such change.

Product overview
Product Introduction
ONV’s POE injectors completely abide by IEEE802.3af/IEEE802.3at/LTPoE++(super hight power) protocols,
15.4watts/30watts/95watts as port output maximum power . Basing on the existing network interface and no need
change anything, using a Cat5 & Cat5e UTP and more advanced UTP to supply the power source to small-power
network devices, meanwhile and offering data transmission . This will decrease the use of external power cables ,
bringing down the cost , guaranteeing the network running stably .
Low cost to realize power over Ethernet , no need to change existing network,POE injectors can easily realize power over Ethernet so that saving the purchasing of
POE switch and power cable , which brings down the cost of network devices for the users . This series includes 1000Mpbs speed rate POE products ,supports
10/100/1000Mpbs transmission speed rate.To reduce the equipment cost at the same time, will not reduce the data transmission rate, which brings
high-effective , high-speed , high-quality experience to the users.
Note
The words “POE injector”etc. referred in this user guide , if no special explanations, it will mean International
Standard Intelligent POE injector , Hereinafter referred to as POE injector .
Feature
!
Be Compliant with IEEE802.3, IEEE802.3u, IEEE802.3af /IEEE802.3at standard
Offer 10/100Mpbs , 10/100/1000Mbps adaptive RJ45 port , support POE function
2 x N pieces 10/100Mpbs copper cable RJ45 port +1 piece AC female jack (AC110-245V input) or 1 piece DC female jack
(DC24-36V /48-57Vinput );
Single POE port can support power up to 15.4watts(af) or 30watts(at)/95watts(LTPoE++)
Supply the power to the powered devices that are compliant with IEEE802.3af /at standard
CE mark, commercial , FCC, Part 15 Class B , RoHS;
The small, compact, quiet design with free heat dissipation is suitable for desk-mounted and wall-mounted type .
Support lightning protection for network port and power input port , up to level 2 lightning protection
Panel indicators monitoring work status & help , fault analysis.
High-performance full load power characteristic

Technical Structure and Port Description
25mm
80mm
76mm
CA
BD AC 220V 50Hz
B
D
279mm
PoE
1234
44m m
195mm
Eth erne t
PoE
Eth erne t
A
123
C
Power Sourcing Equipment
Power over Ethernet midspan injectoe 4 ports
PWR
4
AC 220V 50 Hz
B
D
440mm
44mm
280mm
A
C
12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
PoE Out
Ethernet in
PoE Out
Ethernet in
PoE Out
Ethernet in
PoE Out
Ethernet in
AC 220V 50Hz
B
D
279mm
PoE
1234
44m m
195mm
Eth erne t
PoE
Eth erne t
A
123
C
Power Sourcing Equipment
Power over Ethernet midspan injectoe 4 ports
PWR
4
5678
567 8
AC 220V 50 Hz
B
D
440mm
44mm
280mm
A
C
12345678910 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PoE Out
Ethernet in
PoE Out
Ethernet in
Single-port POE injector
DC power input type
A. Ethernet input RJ45 port B. POE output working indicator
C.POE output RJ45port D. DC24~36V/48~57V input
Single-port POE injector
AC power input type 4-port POE Mid-span injector
A. POE output RJ45 port B. Ethernet input RJ45 port
C. POE output working status indicator D. AC100-220V 50/60Hz input port
8-port POE Mid-span injector
A. POE output RJ45 port B.Ethernet input RJ45 port
C.POE output working status indicator D. AC100-240V 50/60Hz input port
16-port POE Mid-span injector
A. POE output RJ45 port B.Ethernet input RJ45 port
C.POE output working status indicator D. AC100-240V 50/60Hz input port
24-port POE Mid-span injector
A. POE output RJ45 port B.Ethernet input RJ45 port
C. POE output working status indicator D. AC100-240V 50/60Hz input port
A.Ethernet input RJ45 port
B.Working status indicator
C.POE output RJ45 port
D. AC100-240V
50/60Hz input port
PoE Injector
A C
B

Indicator description:
Indicator Status Description
Power indicator: P Working
Power off
PoE indicator: PoE
(Green LED)
Connected PD device, working properly
Short circuit or Current overload
No connected PD device or No power supply
ON
Blink
OFF
ON
OFF
Connect to power
Smart managed PoE switch adopts AC 100-240V, 50/60Hz.
1.Please check the power supply specification matches with the required;
2.Connect switch power wire to AC power socket, shown as in the following figure.
Power Supply Connection Figure Mounting Kits Installation Figure Rack Installation Figure
L Angle Iron
Screw
After installation, please check:
If there is enough space for heat sink; if the power socket is suitable for switch specification; if the power, switch and rack are
properly grounded and if the connection between switch and other network equipments are normal.
Note: 1)Please make sure that powered devices conforms to IEEE802.3af/at
2)PoE injector that supports LTPoE++ high power standard can achieve super high power supply function
!

Installation guide
Please install with the supporting devices.
Installation
Please confirm the following things before installation:
1. Whether POE port power supply power meet the power requirement of the connected devices or not .
2. Whether the POE standard requirements and power supply mode match with the powered devices or not ,
Mid-span : 4,5+; 7,8-/ End-span : 1,2+; 3,6-;
3. Whether the power of the matched power adapter is consistent with the label specification requirement of
the Ethernet switch
Please install the POE injectors as per following steps :
1. Put POE injectors on big enough and steady desk
2. Use the power adapter to connect with power input port , and use power cable to connect the power socket.
3. Connect network devices with the Ethernet port via network cable
!
Power
If initialization is inconsistent with the above, please check the power.
Note
!Note
1. Don’t put any heavy goods on the POE injectors and make sure POE injectors get excellent ventilation and heat
dissipation environments
2. Please turn off the power before hot plugging
Connect with power cable , insert jack , turn on the power . After startup, the LEDs shows following conditions :
1. Power LED indicator is on all the time
2. After the POE port connects with PD , POE indicator is ON.

Connection Diagram
AC Power
Power
PoE Mid-span
PSE31016
PoE
Ethernet
PoE Wireless
PoE IP Camera
PoE IP Camera
Data+power Data+powerData+power
Power
Ethernet Switch

Model description with details
www.onv.com.cn
Tel:[phone] Fax:[phone] Email:[e-mail]
Address: Room 1003, Block D , Tairan building , Chegongmiao, Futian district ,Shenzhen ,China
Factory address:No 5, A building, SenYuTai S&T park, Longhua road, BaoAn district,Shenzhen, China
PSE3101AC: single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3af, AC110-245V input , POE port output power : 15.4watts, total power : 16watts.
PSE3101AC-at: single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3at ,AC110-245V input , POE port output power : 25.5wattstotal power : 30watts.
PSE3101 G: single-port 10/100/1000Mbps POE injector , singe port supports POE IEEE802.3af ,AC110-245V input , POE port output power : 15.4watts, total power : 16watts.AC
PSE3101 G-at: single-port 10/100/1000Mbps POE injector , singe port supports POE IEEE802.3at ,AC110-245V input , POE port output power : 25.5watts, total power : 30watts.AC
PSE3101DC: DC input single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3af ,DC8-32V input , POE port output power : 15.4watts, total power : 16watts.
PSE3101DC : DC input single-port 10/100/1000Mbps POE injector , singe port supports POE IEEE802.3af ,DC8-32V input , POE port output power : 15.4watts, total power : 16watts.G
PSE3101DC-at: DC input single-port 10/100Mbps POE injector , singe port supports POE IEEE802.3at ,DC24-36V input , POE port output power : 25.5watts, total power : 25.5watts.
PSE3101DCG-at: DC input single-port 10/100/1000Mbps POE injector , singe port supports POE IEEE802.3at ,DC24-36V input , POE port output power : 25.5watts, total power : 25.5watts.
PSE3104: 4-port 10/100Mbps POE mid-span injector , IEEE802.3af ,Voltage input: 48~57VDC power:AC100~240V,50/60Hz, POE port power : 15.4watts , total power : 60watts
PSE3104-at: 4-port 10/100Mbps POE mid-span injector , IEEE802.3at , POE port power : 25.5watts , total power : 120wattsVoltage input: 48~57VDC power:AC100~240V,50/60Hz,
PSE3104G: 4-port 10/100/1000Mbps POE mid-span injector , IEEE802.3af , POE port power : 15.4watts , total power : 60wattsVoltage input: 48~57VDC power:AC100~240V,50/60Hz,
PSE3104G-at: 4-port 10/100/1000Mbps POE mid-span injector , IEEE802.3at , POE port power : 25.5watts , total power : 120wattsVoltage input: 48~57VDC power:AC100~240V,50/60Hz,
PSE3108: 8-port 10/100Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 15.4watts , total power : 120watts
PSE3108-at: 8-port 10/100Mbps POE mid-span injector , IEEE802.3at ,Voltage input: 48~57VDC power:AC100~240V, POE port power : 25.5watts , total power : 220watts
PSE3108G: 8-port 10/100/1000Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 15.4watts , total power : 120watts
PSE3108G-at: 8-port 10/100/1000Mbps POE mid-span injector , IEEE802.3at , Voltage input: 48~57VDC power:AC100~240V,POE port power : 25.5watts , total power : 220watts
PSE31016: 16-port 10/100Mbps POE mid-span injector , IEEE802.3af ,Voltage input: 48~57VDC power:AC100~240V, POE port power : 15.4watts , total power : 240watts
PSE31016-at: 16-port 10/100Mbps POE mid-span injector , IEEE802.3at , Voltage input: 48~57VDC power:AC100~240V,POE port power : 25.5watts , total power : 440watts
PSE31016G: 16-port 10/100/1000Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 15.4watts , total power : 240watts
PSE31016G-at: 16-port 10/100/1000Mbps POE mid-span injector , IEEE802.3at , Voltage input: 48~57VDC power:AC100~240V,POE port power : 25.5watts , total power : 440watts
PSE31024: 24-port 10/100Mbps POE mid-span injector , IEEE802.3af ,Voltage input: 48~57VDC power:AC100~240V, POE port power : 15.4watts , total power : 440watts
PSE31024G: 24-port 10/100/1000Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 15.4watts , total power : 440watts
PSE3401: 10/100Mbps POE mid-span injector , IEEE802.3af ,Voltage input: 48~57VDC power:AC100~240V, POE port power : 60watts , total power : 440watts
PSE3401G: 10/100/1000Mbps POE mid-span injector , IEEE802.3af ,Voltage input: 48~57VDC power:AC100~240V, POE port power : 60watts , total power : 440watts
PSE3501: 10/100Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 95watts , total power : 440watts
PSE3501G: 10/100/1000Mbps POE mid-span injector , IEEE802.3af , Voltage input: 48~57VDC power:AC100~240V,POE port power : 95watts , total power : 440watts