OpenEye MV Series User manual

1. Connect the network cable intended for remote
connections to the Client Network Port.
2. Connect the supplied keyboard and mouse using the
USB ports.
3. Connect a monitor using the HDMI®port.
4. Connect the cameras to PoE ports, or the external
camera network.
5. Plug the supplied power cord into the recorder and
connect it to a power source.
MV-SERIES CLOUD MANAGED APPLIANCE
This guide will assist you with the initial setup of your cloud managed appliance and recording software. This guide includes hardware
setup, software setup, and connecting your appliance to the Web Services Portal.
Power
Supply
Client
Network
Port
Keyboard and
Mouse
HDMI®
Monitor
PoE IP Camera
Connection
On / Off
Switch
1
1. Go to Setup , and navigate to the Remote Services
tab.
2. Click Web Services.
3. Type your Recorder Name & Registration Code.
CONNECTING TO OPENEYE WEB SERVICES
NOTE Reference the OWS Software Manual for
instructions on fi nding your Recorder
Registration Code.
4. Click Connect.
GETTING STARTED
QUICK START GUIDE
Log in to the software using the default credentials:
Username: admin
Password: 1234
Complete the First Time Wizard for basic system setup.
APEX SOFTWARE CREDENTIALS
Reset
HDMIx 2 USB3.0 1357
246 8
2
3
4
5
8 | 16 Channel
Reset
Button
CLIENT 13 15
10 12 14 16
911
Remote Communication Port 80 (8888 used if 80 is blocked)
Client Network Port IP Address DHCP
On-board PoE Ports 1-8 DHCP IP Range:192.168.50.11 - 192.168.50.100 Static IP Range: 192.168.50.101 - 192.168.50.127
Ports 9-16 DHCP IP Range:192.168.50.131 - 192.168.50.220 Static IP Range: 192.168.50.221 - 192.168.50.253
Copyright ©2021 OpenEye. All Rights Reserved. Information contained in this
document is subject to change without prior notice. OpenEye does its best to provide
accurate information but cannot be held responsible for typos or mistakes.
37578AB
Network Settings
Apex Server software makes it easy to add and confi gure IP
cameras. MV-Series Apex recorders will automatically detect
and add OpenEye and ONVIF Profi le S Compliant IP cameras set
to DHCP connected to the on-board PoE switch.
NOTE Third party cameras may need to be confi gured
using a third party program before being
added to the Apex appliance. Cameras that don’t
support ONVIF can be confi gured to record via
RTSP streaming.
CAMERA MANAGEMENT

This product must be powered only from the type of power source indicated on the label. If uncertain of the type of power supply to the
building, consult product dealer or local power company.
This equipment must be connected to a properly grounded outlet.
This device is to be connected only to PoE networks without routing to the outside plant.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Maintenance must be performed by qualifi ed personnel only.
NOTICES
Copyright ©2021 OpenEye. All Rights Reserved. Information contained in this
document is subject to change without prior notice. OpenEye does its best to provide
accurate information but cannot be held responsible for typos or mistakes.
37578AB
Total POE Power Budget
8-Port 120W Max
16-Port 200W Max
Max Per Port 30W*
Warning Notes:
*Port will be disabled if power demand exceeds 30W