I. Manual Introduction
This manual is a part of the article to which it is referred. Please read the
instructions carefully as they provide important information on SAFETY
DURING USE AND MAINTENANCE PROCEDURES. Descriptions and
images contained in the publication are not binding. We have the right to
modify any information for enhancement purposes without any obligation to
update this manual. Graphics and images contained in this manual are only
examples and may be different from actual products.
II. Application Scope
It is mainly use for hospital.A container for sterilizing and sterilizing storage
dressings or surgical instruments.
III. Features
1.Stainless steel tensile storage tank
2. Diameter:
17cm: JM-D1-17
20cm: JM-D1-20
23cm: JM-D1-23
26cm: JM-D1-26
30cm: JM-D1-30
3. ①Movable handle:Humanized handle design, easy to use, strong
load-bearing.
②Fixed lock catch:The upper cover is designed with 2 fixed buckles, which
can be fastened easily and tightly, and the cover is tightly combined with the
groove body.
③Seal latch:Closed latch prevents bacteria from entering.
④Tank vent:Surrounded by dense ventilation holes, closed state, moisture
sterilization.
⑤Bottom vent:The bottom of the five sets of breathable holes, easy
ventilation, high pressure disinfection, high temperature.
4. Heavy loading capacity.
IV. Notes
1. Operators must read this manual carefully, follow the instructions and
familiarize with the correct operating and maintenance procedures.
2. Prohibited illegal and barbaric action and overload operation, to avoid
improper use and damaging.
V. Warning and Caution
DO NOT USE IN ROUGH WAY. KEEP IT DRY AND CLEAN.
VI. Maintenance
1. Keep clean as routine (Incl.disinfect).
2. Check if any parts are loose and tighten them as required.
VII. Storage
Store this in the place of damp proof and non-corrosion environment
VIII. Transport
1. Be transferred by common transporting tools: ship, plane, train, truck.
2. No throwing or dropping when transshipment.
