opticis SPIDER OHD15 User manual

Revision History
1.CONTENTS
SPIDER TM
1: 5HDMI Distribution Amplifier (OHD15)
User’s Manual
© 200
6
Opticis
Co., Ltd. All Rights Reserved
Revision 1
Opticis Locations
Opticis Co., Ltd. Opticis North America Ltd.
#501 Byucksan Technopia, 434-6, 330 Richmond Street,
Sangdaewon-Dong, Chungwon-Ku, Suite 100, Chatham, Ontario,
Sungnam City, Kyungki-Do, Canada N7M 1P7
462-120, South Korea
Tel: [phone] Tel.: [phone]
Fax: [phone] Fax: [phone]
For order support, please contact your Distributor or Reseller.
For technical support, check with the with the Opticis web site www.opticis.com or
contact [email protected]
www.opticis.com

U
npacking
Each SPIDERTM HDMIDistributor package includes the following items;
OHD15SPIDERTM HDMI Distribution Amplifier Unit
One (1) 5V, 2A Power Supply Adapter
User manual
T
roubleshooting
Problem Remedy Actions
Distribution Amplifier not
operating
Make sure the 5V power is plugged in the back of
the unit.
Check to see if the power LED light is on.
No picture (or signal)
Or Poor picture
1. If you are using copper based HDMI cable,
overall length of the cables (length of the cable
from video source to switch and length of the
cable from switch to display) should not exceed
20ft. Exceeding 20ft. with copper based cables
will result in no or poor picture quality. To
extend beyond 20ft, please use fiber optical
HDMI/DVI extension cables such as Opticis
Models, M1-1000, M1-2000, and M1-1P0
cables.
2. Use high quality HDMIcables.
3. If you are using computers, try other refresh
rate settings. Most HDTVs have refresh rate of
48Hz and computer’s video cards are usually
set at higher refresh rate. Try lower refresh
rates.
4. Make sure all HDMI connectors are tightly
secured to all HDMI ports. Loose plugging on
the HDMI connectors will result in no or poor
picture.
5. Turn off all equipments (video source, switch
and HDTV) and restart all equipments.
Incorrectly sized picture /
resolution or No picture Reset the product by power off and on so that it retries DDC and HDCP communication.
1-9 Troubleshooting

CONTENTS
Contents 1-1
Description,General Specification1-2
Environmental and Reliability Specifications 1-3
Main Features 1-4
Video Connection 1-5
Mechanical Specification 1-6
Technical Specification 1-7
Warranty Information 1-8
Troubleshooting 1-9
1-1 Contents
Warranty Information
1 (One) Year Warranty
Opticis warrants SPIDERTM OHD15, HDMI Distribution Amplifiers to be free
from defects in workmanship and materials, under normal use and service, for
a period of one (1) year from the date of purchase from Opticis or its
authorized resellers.
If a product does not work as warranted during the applicable warranty
period, Opticis shall, at its option and expense, repair the defective product or
part, deliver to customer an equivalent product or part to replace the defective
item, or refund to customer the purchase price paid for the defective product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) day warranty or the
reminder of the initial warranty period, whichever is longer.
Optics shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
products returned to Optics for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty if
the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorizedmodifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the Product in the
application for which said Product is intended.
1-8Warranty Information

Description,
General Specification
. SPIDERTM OHD15, HDMI Distribution Amplifier, allowsone (1) digital video
source to be spilt into Five (5) digital displays. The built-in amplification
function enables HDMIsignal distribution without signal loss. The product
guarantees to support full channels HDMI/HDCP compliance, which means
NEVER displaying HDCP certified sources in not-HDCP certified TVs.
ITEM DESCRIPTION
Model Name OHD15
Input Signal HDMI Single Link
Output Signal HDMI Single Link , 5ports
HDMI Compliance HDMI 1.2 specification
Resolution VGA / SVGA / XGA /SXGA/WSXGAfor PC
480i/p , 720i/p , 1080i/p for HDTV
Receptacle DC Power Jack for +5V power in the rear panel
Power Consumption DC+5V , 6.5W Max
Dimension 435X 108X 34 mm
1
-
2 Description
,
General Specification
T
echnical
S
pecification
Frequency bandwidth: 1.65 Gbps (Single Link)
Supporting Graphic Resolution: SXGA (1280 X 1024 at up to 60Hz)
1080i/p (1920 X 1080 at up to 60Hz)
Inputs: HDMI-D Female ports
Output: HDMI-D Female port.
Power supply: one (1) DC 5V, 2A or 3A power adapter included.
Connector Pin Assignment
HDMI-D Input, Output
Part No. Pin No. Description Remarks
1TMDS DATA 2P
2TMDS DATA 2 Shield
3TMDS DATA 2M
4TMDS DATA 1P
5TMDS DATA 1Shield
6TMDS DATA 1M
7TMDS DATA 0P
8TMDS DATA 0Shield
9TMDS DATA 0M
10 TMDS Clock P
11 TMDS Clock Shield
12 TMDS Clock M
13 CEC
14 RESERVED
15 DDC Clock
16 DDC DATA
17 GND
18 +5v
HDMI 19pin
19 Hot Plug Detect
1-7 Technical Specification

Environmental and Reliability Specifications
1Operating Conditions
Temperature : 0?~ 50?
Humidity : 10% ~ 80%, non-condensing
Altitude : maximum 3,000m
2Transportation Conditions
Temperature : -20?~ 60?
Humidity : 5% ~ 95%, non-condensing
Altitude : maximum 15,000m
3 Storage Conditions
Temperature : -20?~ 60?
Humidity : 5% ~ 95%, non-condensing
Altitude : maximum 3,000m
4 Reliability Specifications
MTBF: more than 50,000 hours at 90% confidence level
Reliability specification and items: refer to “Specification of reliability
test for LCD monitor”
1-3 Environmental and Reliability Specifications
Mechanical Specification
[Dimensions]
OHD15: 435X 108X 34 mm
POWER: Toggle DC +5V Input on/off
DC power jack: inner pole; +5V, outer tube; GND
HDMI IN: HDMI Input Signal
HDMI OUT CH1~5: HDMI Output Signals
LED Indicators
Power: Power On
HDCP: HDCP Certified
HDMI/DVI: HDMI On/ DVI Off
1-6 Mechanical Specification

V
ideo
C
onnection
1. Connect your video source’s HDMI output port to the OHD15’s HDMI
input port using standard HDMI cables (not included). Make sure all
your HDMI source and the displaysare turned off before connecting
the cables.
2. Connect your HDMI display’s HDMI input port to OHD15’s HDMIoutput
port. Make sure your HDMI display is turned off before connecting the
cables.
3. Plug the 5V power supply into the distributor’s power input port.
4. Plug the 5V wall mount power supply into the wall outlet.
5. Turn on your displays.
6. Turn on your video source.
1-5 Video Connection
M
ain
F
eatures
Complete HDMI/HDCP compliance for all individual 5 channels
SPIDERTM OHD15HDMI Distribution Amplifiers NEVER allows transmitting
HDCP certified sources to not-HDCP-certified displays.Otherwise, it flexibly
makes pictures adapted to the connected displays.
High Quality Picture -No Signal Loss and Digital Noise Free
SPIDERTM OHD15HDMI Distribution Amplifiers are built to deliver the
highest quality picture preserving the native resolutions of the video
sources without any signal loss. At the same time, the digital noises that
may affect the picture quality will be eliminated. Due to the nature of the
digital signals and passing through multiple stages of connection when
using distribution amplifiers, it is important to eliminate the digital noises
and boost the signal strength to preserve/enhance the video signal quality.
Signal Amplification for signal reliability and long length signal
transmission.
Our 5V power adapter supplies adequate power to amplify the video
signals from the video source. This is necessary as the overall length from
the video source to the displays is longer when using the distribution
amplifiers (distance from the video source to the distribution amplifier +
distance from the distribution amplifier to the display). In most cases, the
overall distance that the HDMIsignal will need to travel is over 10ft. Due to
the nature of HDMI signals, amplification is necessary to warrant the video
quality and reliability. (Without amplification, there may be occasional
blackouts or blinking effects) With this amplification feature, your video
display can be extended up to 2300ft using our fiber optical HDMI/DVI
cables, M1-1000, M1-2000, and M1-1P0.
1-4 Main Features