opticis ODSG-01-HS User manual

Revision History
1. CONTENTS
ODSG-01-HS
HD/SDI Product Information
User’s Manual
© 2008 Opticis Co., Ltd. All Rights Reserved
Revision 1
Opticis Locations
OpticisCo.,Ltd. OpticisNorthAmericaLtd.
#501 Byucksan Technopia, 434-6, 330 Richmond Street,
Sangdaewon-Dong, Chungwon-Ku, Suite 100, Chatham, Ontario,
Sungnam City, Kyungki-Do, Canada N7M 1P7
462-120, South Korea
Tel: [phone] Tel.: [phone]
Fax: [phone] Fax: [phone]
For order support, please contact your Distributor or Reseller.
For technical support, check with the with the Opticis web site www.opticis.com or
contact [email protected]

Unpacking
Each OPTICIS HD/SDI converter package includes the following items;
OPTICIS HD/SDI(ODSG-01-HS) Unit
One (1) 5V, 3A Power Supply Adapter
Download cable
User manual
Troubleshooting
Problem Remedy Actions
Converter not
Operate
Make sure the 5V power is plugged in the
back of the unit.
Check to see if the power LED light is on.
No picture (or signal)
Or Poor picture
1. If you are using copper based HDMI cable,
overall length of the cables (length of the
cable from video source to switch and
length of the cable from switch to display)
should not exceed 20ft. Exceeding 20ft.
with copper based cables will result in no
or poor picture quality. To extend beyond
20ft, please use fiber optical HDMI/DVI
extension cables
2. Use high quality HDMI cables.
3. If you are using computers, try other
refresh rate settings. Most HDTVs have
refresh rate of 48Hz and computer’s video
cards are usually set at higher refresh rate.
Try lower refresh rates.
4. Make sure all HDMI connectors are tightly
secured to all HDMI ports. Loose plugging
on the HDMI connectors will result in no or
poor picture.
5. Turn off all equipments (video source,
switch and HDTV) and restart all
equipments.
Incorrectly sized picture /
resolution or No picture Reset the product by power off.
1-9 Troubleshooting

CONTENTS
Contents 1-1
Description, General Specification 1-2
Environmental and Reliability Specifications 1-3
Supported I/O Resolutions 1-4
PanelDescriptions 1-5
MechanicalSpecification 1-6
Technical Specification 1-7
WarrantyInformation 1-8
Troubleshooting 1-9
1-1 Contents
Warranty Information
1 (One) Year Warranty
OPTICIS warrants OPTICIS ODSG-01-HS HD/SDI converter to be free from
defects in workmanship and materials, under normal use and service, for a
period of one (1) year from the date of purchase from OPTICIS or its
authorized resellers.
If a product does not work as warranted during the applicable warranty
period, OPTICIS shall, at its option and expense, repair the defective product
or part, deliver to customer an equivalent product or part to replace the
defective item, or refund to customer the purchase price paid for the defective
product.
All products that are replaced will become the property of OPTICIS.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) day warranty or the
reminder of the initial warranty period, whichever is longer.
OPTICIS shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
products returned to OPTICIS for repair under warranty or not.
Warranty Limitation and Exclusion
OPTICIS shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by OPTICIS or its authorized agents, causes
other than from ordinary use or failure to properly use the Product in the
application for which said Product is intended.
1-8 Warranty Information

Description, General Specification
:OPTICIS ODSG-01-HS
ITEM DESCRIPTION
Model Name ODSG-01-HS
Input Signal DVI/HDMI Fotmat
Output Signal Output data format : SDI YCbCr(422)
Input format
VIDEO RGB(444), YCbCr(444), YCbCr(422)
Input format
AUDIO I2S / 48Khz
Receptacle DC Power Jack for +5V power in the rear panel
Power Consumption DC +5V , 3A
Dimension 432 X 109 X 40 mm
1-2 Description, General Specification
Technical Specification
Specification
¾Input video bandwidth------------------1.65Gbps
¾Output video bandwidth-----------------1.485Gbps
¾Maximum Input Resolution--------------1920x1080i
¾HDMI and DVI to SD/HD-SDI Conversion (with embedded audio and
time code)
¾RGB 4:4:4, YcbCr 4:4:4 or YcbCr 4:2:2 DVI/HDMI support
¾PS2-base Firmware Updates
¾100% digited, no A/D OR d/a conversions
¾HDMI and DVI input connector type
¾Only one(1) input connector type will be proceeded
Always HDMI input connector detection take priority of DVI
1-7 Technical Specification

Environmental and Reliability Specifications
1 Operating Conditions
Temperature : 10℃~ 40℃
Humidity : 10% ~ 80%, non-condensing
Altitude : maximum 3,000m
2 Transportation Conditions
Temperature : -25℃~ 60℃
Humidity : 5% ~ 95%, non-condensing
Altitude : maximum 15,000m
3 Storage Conditions
Temperature : -20℃~ 45℃
Humidity : 5% ~ 95%, non-condensing
Altitude :maximum3,000m
4 Reliability Specifications
MTBF: more than 50,000 hours at 90% confidence level
Reliability specification and items: refer to “Specification of reliability
test for LCD monitor”
1-3 Environmental and Reliability Specifications
Mechanical Specification
[Dimensions]
ODSG-01-HS: 117 x 105 x 33
POWER: Toggle DC +5V Input on/off
DC power jack: inner pole; +5V, outer tube; GND
-HDMI IN : HDMI Input Signal
-DVI IN : DVI/HDMI Input Signal
SDI OUT CH1~2: SDI Output Signals
LED Indicators
Power: Power On
HDMI: HDMI input
DVI : DVI/HDMI input
1-6 Mechanical Specification

Panel Descriptions
< Front >
zPower switch
zPower indicator light
zFirmware update PS2 port
zSDI outputs
< Rear >
zStatus indicator light
(HDMI input port)
¾Video sync detection
¾DVI input connection status
¾HDMI input connection status
zDVI input port
z5V power connector
1-5 Panel Descriptions
Supported I/O Resolutions
Video Input Data Format
Information
Input Data Format RGB(444), YCbCr(444), YCbCr(422)
Color Depth 8/10/12bit
Input Signal Resolution SMPTE-274M 1080i(60/59.94/50)
SMPTE-296M 1080p(25/24/23.976)
SMPTE-260M 720p(60/59.94/50)
SMPTE-125M 480i(59.94)
ITU-R BT.656 576i(50)
Audio Input Data Format
Information
Input Data Format I2S
Sampling Rate 48kHz
Input Channel 2channel
* Output data format : YCbCr(422)
1-4 Supported I/O Resolutions