
This document is Option Confidential - it may not be duplicated, neither distributed externally without prior and written permission of
Option NV.
About this document
Overview and Purpose
This document describes how to use the Option XYfi (engineering name „Nyos Evo‟) during testing. The
first 3 parts explain how to install the drivers and make the different driver interfaces visible in the device
manager, so that AT commands can be send. The 4th part explains how to use the web browser, to
control settings of the WLAN access point (hotspot). For some tests it might be required that the device
has some „client‟ functions, e.g. switch WLAN on/off, change data rates or channel. These items are
explained in the last part.
Confidentiality
All data and information contained or disclosed by this document is confidential and proprietary of Option
NV, and all rights therein are expressly reserved. By accepting this document, the recipient agrees that
this information is held in confidence and in trust and will not be used, copied, reproduced in whole or in
part, nor its contents revealed in any manner to others without prior and written permission of Option NV.
Version History
Added hot-spot configuration
Added network hotfix and WLAN
control
Added controlling the WLAN
transmitter
Added use of the XYfi with a
battery pack