Notice:ToensuretheLCD displaywill workwell withyourcomputer,
pleaseconfigurethedisplaymode ofyourgraphiccardt
less than orequalto1024 x768 resolution and makesuretiming
ofthe displaymode iscompatiblewiththe LCD display.
Wehavelisted the “CompatibilityModes”ofthisLCD displayin
appendicesforyourreference.
uConnecting theDisplay (Figure7.1)
To setup thisdisplay, pleasereferto thefollowing figureand procedures.
1. Ensure all equipment is switched off.
2. Connectoneend ofthepoweradapterto thepowerconnector;plug one
end oftheACpowercord into thepoweradapter, and then theotherend
into an electricaloutlet(Œ).
3. ConnecttheVGA signalcableto the15-pin connectorofyourhost
computerand tighten thescrews(•).
4. ConnecttheAudio-In cablefromaudio inputportofyourdisplay to the
Audio-outportofyourcomputer(Ž).
5. ConnecttheUSBsignalcableto theUSBconnectorofyourhost
computer(•).
6. Connectyourheadphoneto theHeadphoneport(•).
7. Turn on yourcomputerand display.
