Optoma EH7700 Installation guide

EH7700
Spectacular image quality, outstanding
brightness and ultimate reliability
WUXGA 7500 Lumens
Lens shift
Extensive lens options
Dual lamp

For more than ten years Optoma has been one of the world’s foremost projector designers and manufacturers - amongst the
very few companies that focus exclusively on projectors.
Today the Optoma ProScene range represents the evolution of projection expertise, honed and refined by manufacturing and
supporting millions of projectors the world over. This knowledge and skill has been distilled into the ProScene products and
support services which are designed specifically for demanding professional applications.
9Higher education
9Lecture theatres
9Houses of worship
9Museums
9Auditoriums
9Boardrooms
9Broadcast studios
9Large classrooms
9Exhibitions
9Conference rooms
9Digital signage
9Stage shows
9Live events
9Projection Mapping
9Meeting rooms
9Post production
9Theatre
9Trade shows
ProScene Certified Partners
Optoma understands that for ProScene customers, their high specification projector must be of exceptional quality and that the
level of support and expertise provided by AV installers and integrators must also be of the highest calibre. To maintain this standard
throughout, we have selected only the very best from within the AV industry to become ProScene Certified Partners.
These rigorously selected partners understand your specific requirements and perhaps as importantly, they have direct access
to the specially-trained Optoma support and service teams. Our dedicated experts are available from the initial design and planning
phase of a project, right through to the installation stages and beyond. Through our partners, you’ll have access to what is probably
the most extensive network of service centres across Europe of any projector manufacturer.
Choosing your ProScene projector is just the start. Total support and service excellence are the core of the ProScene ideology,
ensuring industry leading dedication to giving you the highest standard of expertise from Optoma and from our certified partners.
Introduction

EH7700 features
7500 Lumens, WUXGA Resolution, Dual Lamp
360º
Installation flexibility - 5x Motorised Lens options and 360˚ Operation
Live performance ready - Mechanical shutter, safety mounting points and flying frame options
RJ45
Ultimate Control - Full support for Crestron, Extron, AMX, PJ-Link and Telnet LAN commands
Powerful Image Blending controls - 3-axis colour matching system and 8x lamp-power steps
Features

P-VIP lamps
The dual Osram 350W P-VIP lamps provide the highest possible
luminance, the essential prerequisite of all highly-efficient projectors.
These lamps stay brighter for longer, provide a long operating life
and a low loss of luminous flux throughout that life. In addition, the
lamp drivers are specifically tuned for the lamps, ensuring not only
optimum operating conditions for every situation, but also provide
sophisticated lamp pulsing modes and the assurance that colour can
be fine tuned according to the application.
Image colour and size control
XGA
SXGA+ 1080p
WUXGA
Where detail really matters, the full WUXGA (1920 x 1200) resolution
offers 15% more pixels than 1080p and 60% more than SXGA+.
This enables unscaled Full HD video and extra detail. Time Code
information can be displayed onscreen at the same time, perfect
for soundtrack recording & video editing where precise timing can
be critical.
Lamp Pulsing Technology
Advanced lamp-pulsing technologies enable colour performance
to be fine tuned directly from the lamp. This unprecedented control
helps create vibrant, perfectly saturated colours across the whole
light spectrum and produces stunningly natural, life-like images.
RYGCMB RYGCMB
Brilliant Pulse Dark Pulse Tuned Plateau
Lamp Current
Rotation 2Rotation 1
I video frame
With Without With Without
Amazing Colour
The EH7700 incorporates BrilliantColor™ technology to produce
stunningly bright images with perfectly balanced life-like colours.
Precision Optics
Aspherical optical elements and the use of Low Dispersion (LD) glass
maintain optimum sharpness and focus uniformity over
the entire image. The ProScene insistence
on uncompromising optical quality
ensures extremely low colour flare
and chromatic aberration resulting in
a crystal clear, high contrast image.
Superb image quality is at the heart of every ProScene product design. At every step, commencing with the incredibly reliable,
high resolution WUXGA DLP®chip, where the image is initially created, via the P-VIP lamp pulsing technology that fine tunes
the colour to exacting standards, through to the precision optics to focus the image on a screen, accuracy and integrity of the
image are paramount.
ProScene chose DLP®technology for its image quality and unmatched reliability. The reflective nature of DLP®micro-mirror
technology provides highly efficient bright images with great contrast whilst maintaining precise colour accuracy and natural,
real-world colour reproduction. For demanding professional applications, the proven reliability of DLP®technology makes it the
obvious choice.
Image Quality

Dual Lamps
Dual lamps enable a level of reliability simply unavailable with
a single lamp projector. Both lamps can be used together to achieve
maximum brightness, whilst still providing redundancy should one
of the lamps fail. Alternatively a single lamp can be used in Relay
Mode to combine the full lifetime of each individual lamp and thereby
minimise service intervals.
Lamp Relay mode
For challenging installations where the EH7700 is run for long
periods, the Lamp Relay function can be used to automatically
switch between lamps.
Lamp 1 Lamp 2
1
2
h
r
1
2
h
r
DLP®Technology
DLP®technology from Texas Instruments®is widely recognised
and acclaimed for its unmatched reliability and long lasting
image performance. When combined with high brightness
and native contrast ratios, it becomes the obvious choice for
demanding applications. Independent testing has proven DLP®
to be the most reliable of projector technologies. Whilst other
technologies may show image quality decline after only a few
thousand hours, DLP®technology can remain unchanged over
hundreds of thousands of hours.
Total Cost of Ownership
For demanding applications the total cost of ownership
of a projector is not in the purchase cost and replacement lamps
but in expensive maintenance and service. ProScene projectors
require very little maintenance, have no user serviceable parts
inside and no filters that require periodic replacement. The result
is low cost, predictable service cycles, enabling planned down
time to be minimised.
We are so confident that the EH7700 image colour
quality will remain as good as the day you bought
it that Optoma will guarantee it for five years.
All ProScene projectors are designed for continuous 24/7 operation. Only the most reliable, industry proven
components are used to ensure superior reliability. This hard-earned “capability” has been meticulously
developed over a decade of designing and supporting millions of projectors the world over. The dust-
sealed,filter-free design prevents dust and dirt from affecting the system – ensuring optimal image quality
with minimal maintenance. ProScene customers can therefore be confident that, as one of the most reliable
projector brands in the industry today, Optoma has a reputation for service excellence that is well deserved.
Reliability
5

Installation Flexibility
To help meet the seemingly limitless challenges of ProAV installations
the EH7700 provides 5 lens options with motorised zoom and focus
to ensure you can get the image size you require. Motorised lens
shift helps you get the image exactly where you want it and the
2 colour wheel options ensure you can match the image quality and
brightness exactly to the application’s requirements.
There are 5 optional lenses, 4 of which
can be easily adjusted via motorised
lens-shift, zoom and focus.
Motorised Lens Shift
10% 10%
-20%
+60%
Lens Position: Center
Shift Range
Projector
WUXGA
360° Projection Capability
Images can be projected over a full 360° range along the vertical
axis, including reproduction on a ceiling or floor.
Picture-in-Picture and Side-by-Side display
Display 2 sources simultaneously with a small inset from the main
image or display both sources side by side.
Interchangeable colour wheels
Two colour wheel options ensure the performance characteristics
of the EH7700 can be tailored to match the application. The
standard colour wheel maximises brightness whilst ensuring good
colour reproduction, whereas the enhanced-colour “video” wheel
maximises colour performance and accuracy. The colour wheels are
interchangeable modules and can be fitted or exchanged on site
without removing the projector cover.
Bright (Standard) Video (Optional)
Flexibility
Flexibility
Lens Options
Optoma model name WT1 WT2 ST1 TZ1 TZ2
Throw Ratio 0.78 1.22 ~ 1.47 1.45 ~ 1.95 1.93 ~ 3.71 3.68 ~ 7.04

Mechanical Shutter
In situations where only absolute darkness is good enough, the
EH7700 has a mechanical shutter to provide total blackout. Perfect
for scene changes during live performances.
Open: Normal image Closed: Blackout
Edge Blending Controls
No two projectors are completely identical. When performing
complex, or even simple edge-blend projects using multiple
projectors, it can be difficult to achieve good results if the images
do not match. The EH7700 incorporates the following features to
ensure high quality and consistent results.
Colour matching
The EH7700 has a full 3-axis colour matching system, which
combined with accurate measurements can create seamless blends
every time.
Brightness matching
The brightness of a projector will vary throughout its life. To correctly
match multiple units, the EH7700 has 8x lamp power steps between
80~100% full brightness.
Without With
Safety mounting points
To complement the existing ceiling mount, KensingtonTM lock and
password security features of all ProScene models, the EH7700
benefits from the addition of 2x M8 safety mounting points with
supplied eye-bolts.
Custom ID colours
The EH7700 is available in both Black and White as standard.
However if your project calls for a higher level of customisation, the
EH7700 is available in any colour from the RAL colour space system.
Please contact your local sales representative for more information.
Flexibility
Flexibility

System Integration Control
Multiple EH7700 can be monitored over LAN and also provide the user with an email message alert in case an error occurs or a lamp fails
or needs to be replaced, using Crestron Roomview. While the web browser interface and full support for Extron’s IP Link, AMX dynamic device
discovery and PJ-Link protocols, allow almost all aspects of the EH7700 to be controlled across a network, keeping you in control, wherever
you are.
Control
Ultimate control
Cut up to 30% from your energy bills using 24-hour automated power scheduling to ensure that projectors power off when not in use.
Global monitoring of
all AV devices
Track projector
lamp life
Email alerts and
instant notifications-
help desk requests,
service reminders,
device failure or theft
Event Scheduling
Download Crestron RoomView®Express for free at
www.crestron.com/getroomview
Help Alert
Real-time interactive Help Desk requests are sorted to come
to the top. The Help Desk then has the ability to respond with
an automatic message or instant message the room with exact
procedures.
Display Power
Check on/off status of display power and system power. View a bar
graph to monitor the percentage of available projector lamp life and
set an alert to notify the services department when a replacement
lamp should be ordered before the lamp fails.
Display Usage
Schedule Event
RoomView Express makes scheduling of recurring or one time
events easy. Setting RoomView to automatically power down at
midnight throughout the week can save valuable lamp life and
ensure security inside the facility.
PC PC PC
PC
PC
EH7700
e-mail
e-mail
remote
control
LAN LAN
INTERNET
Selected View by Rooms, Attributes or Contacts
RoomView Express gives you the ability to simultaneously view
more than 250 rooms from a single screen. Customise RoomView
to view by room name, locations and group
Room Name and Location (sortable)
Online Status
Event Log
Automatically generates log files, reports and charts to analyze ROI
and budget allocation. Track device usage, call statistics and user
history.
Projector Power
CERTIFIED

Lens Options
Optoma model name WT1 WT2 ST0/ST1 TZ1 TZ2
Focal Length (f) (mm) 11.73 18.1 ~ 21.72 21.5 ~ 28.7 28.6 ~ 54.33 54.06 ~ 102.7
F number 2.2 2.0 ~ 2.3 2.0 ~ 2.3 2.2 ~ 3.0 2.3 ~ 3.16
Zoom Range (Ratio) Fixed 1.2x 1.33x 1.9x 1.9x
Zoom & Focus Adjustment Fixed Motorized
Throw Ratio 0.78 1.22 ~ 1.47 1.45 ~ 1.95 1.93 ~ 3.71 3.68 ~ 7.04
Throw Distance (m) 0.5 ~ 8.4 0.79 ~ 15.8 0.94 ~ 21.0 1.25 ~ 40.0 2.38 ~ 75.8
Throw Distance (feet) 1.65 ~ 27.6 2.59 ~ 51.9 3.07 ~ 68.9 4.09 ~ 131.1 7.8 ~ 248.7
Projection Image Size 30” ~ 500” inches
Motorized Lens Shift Fixed Horizontal: + / - 10% offset
Vertical:- 20%~ + 60% offset
Throw Distance Chart
EH7700 Throw Distance
Diagonal Image Size WT1 WT2 ST0 / ST1 TZ1 TZ2
Fixed (m) Min (m) Max (m) Min (m) Max (m) Min (m) Max (m) Min (m) Max (m)
50”
60”
70”
80”
100”
150”
200”
250”
300”
0.84
1.01
1.18
1.35
1.68
2.52
3.36
4.2
5.04
1.3
1.56
1.82
2.08
2.61
3.91
5.21
6.52
7.82
1.58
1.9
2.20
2.53
3.16
4.75
6.33
7.92
9.5
1.56
1.87
2.19
2.5
3.12
4.68
6.25
7.81
9.37
2.1
2.52
2.94
3.36
4.2
6.3
8.4
10.5
12.6
2.08
2.49
2.91
3.33
4.16
6.24
8.32
10.39
12.47
4.0
4.8
5.59
6.39
7.99
11.99
15.98
19.98
23.97
3.97
4.76
5.55
6.34
7.95
11.89
15.86
19.82
23.78
7.58
9.1
10.61
12.13
15.16
22.75
30.33
37.91
45.49
For guide purposes only
Lenses

Eco Friendly
Cut up to 30% from your engergy bills using 24-hour automated
power scheduling to ensure that projectors power off when
not in use.
Direct Power On
The projector will start up instantly when power is supplied
to the Unit. This eliminates the need to manually turn on the
projector via the remote control or the keypad, ideal for use
in rooms with a “master” power switch.
Signal Power On
The projector will power on when it receives a signal through
one of the PC/video inputs. This ensures that the projector
is only switched on when it is needed.
Auto Power Off
If after a pre-determined time the projector does not receive
a signal, it will turn itself off automatically, conserving power
and extending the life of the lamp.
Eco Standby Mode
Reduces energy consumption to less than 0.5W
when the projector is not in use.
Green
We know that improving our products is the best
way to reduce our impact on the environment.
That’s why at Optoma, we design our products
to have a long usable life, use fewer materials,
ship with the minimum packaging and be free
of all possible toxic substances. Naturally, energy
efficiency and being recyclable are built in at the
design stage. With each new product, we strive
towards minimising our environmental impact.
For full details of Optoma Project Green please
visit our website.

Dimensions

Easy to use remote control
1Power On
2Mechanical Shutter
3Function 2 (user assigned)
4Display Mode
5Freeze
6Lens Zoom +/-
7Remote ID (All)
8HDMI 2
9HDMI 1
10 DVI (dependent on model)
11 Information Panel
12 Re-Sync
13 Video
14 YPbPr
15 Numbered keypad (for remote ID / security input)
16 Power Off
17 Test Pattern
18 Function 1 (user assigned)
19 Enter/Help (user assignable)
20 Four Directional Select Keys
21 Menu
22 Lens Shift
23 Format (Image Aspect Ratio)
24 Lens Focus +/-
25 Remote ID
26 VGA 1
27 S-Video
28 VGA 2
29 BNC
Input/Output Connections
30 S-Video
31 Composite Video (CVBS via BNC)
32 Component Video (YPbPr)
33 BNC (YPbPr/RGBHV)
34 Kensington™ Lock Port
35 RJ-45
36 Wired Remote (3.5mm)
37 VGA-Out (Monitor Loop-through)
38 VGA2-In (YPbPr via adapter)
39 VGA1-In (YPbPr via adapter)
40 HDMI 1
41 HDMI 2
42 +12V Trigger (3.5mm, 250mA)
43 RS-232 (9-pin D-Sub)
44 Power Switch
45 Power Socket
Keypad
46 Power
47 Source
48 Re-Sync
49 Lens Shift
50 Info
51 Menu
52 Enter
53 Focus
54 Shutter
55 Control Keys
56 Zoom
30 31 32 33
34 35 41 42 4337 38 39 4440 45
24
25
26
27
28
22
23
20
21
17
18
19
6
9
2
8
7
1
4
5
10
11
12
3
46 47 48 49
50 51 52 53
54 5655
Labelling
1314
16
36

Technical Specifications
Projector
DLP™ Technology by Texas Instruments
Technology 0.67” WUXGA, DC3,Type A chip
Resolution Native WUXGA (1920 x 1200)
Brightness - Dual Lamp 7000 ANSI lumens / 7500 centre lumens using “Bright” colour wheel
Aspect Ratio 16:10 native, 4:3 & 16:9 compatible
Refresh Rate 15kHz to 100kHz / 25Hz to 85Hz
Contrast 5000:1
Video Compatibility PAL (625/576i/p), SECAM, NTSC (525/480i/p), HDTV (720p, 1080i, 1080p)
Optics
Lamp Type 2x 350W P-VIP
Lamp Life 2000 hr bright mode / 2500 hr ECO mode (5000 hr ECO relay mode)
Colour Wheel Options Bright wheel 6 Segment RGBCYW (standard)
Video wheel 6 Segment RGBCYM (optional)
Shutter Mechanical
Lens Shift Motorised lens shift, focus and zoom (+60% -20% V, ±10% H)
Lenses (no lens supplied as standard)
WT1 Short throw 0.78 (Fixed)
WT2 Wide 1.22~1.47 (1.2x zoom)
ST0 Standard 1.45~1.95 (1.33x zoom)
ST1 High quality 1.45~1.95 (1.33x zoom)
TZ1 Long 1.93~3.71 (1.9x zoom)
TZ2 Extra long 3.68~7.04 (1.9x zoom)
Keystone Correction Vertical ±20°
Uniformity 95% (centre)
Connectivity
Inputs 2 x HDMI (with locking screw)
BNC (RGBHV)
PC RGB 2 x 15 Pin D-Sub VGA
Component 3RCA
S-Video/Composite 4 pin Mini DIN / RCA
Output PC (monitor loop-through) VGA Out
+12V trigger (3.5mm jack)
Control and Communication RS232 9pin D-SUB
RJ45 (Crestron/Extron/PJ-Link/Telnet)
Wired Remote (3.5mm jack)
General
Noise Level 39dB
Weight 24Kg (without lens)
Dimensions (W x D x H) 439 x 549 x 235mm
Power Requirements 100 – 240V AC @ 50 – 60Hz
Power Consumption 907w bright mode < 0.5w standby mode
Heat Dissipation 3416 BTU/hr.
Operating Conditions 730w ECO mode <0.5w standby mode 5 ~ 40˚C, max. humidity 85%, max. altitude 3000m
Portrait mode1Not supported
360˚ Operation Yes (Around horizontal axis)
Operating Temperature 0 ~ 750m, 5 ~ 40˚C
750m ~ 1500m, 5 ~ 35˚C
1500 ~ 3000m, 5 ~ 30’C
Environmental RoHS and WEEE
Conformances CE, TUV-GS, CB
Security 4-digit PIN code
Kensington Lock port
2x M8 Safety Mounting Points (Eye Bolts supplied)
Warranties 3 Years
Supplied Accessories
Cables VGA cable
AC power cord
Other Infra-red remote control (selectable IR code sets for controlling multiple units)
Batteries x 2
User manual CD
Quick start card
Warranty card
WEEE card

Accessories
Flying Frame EH7700
Part Nr: P5640
The safest way for handling a projector in rental & staging
applications is by using it in combination with a flying frame. The
projector is fitted on a bottom frame that is adjustable in 3 axes,
allowing the projector to be aligned on screens with high accuracy.
This frame can be used in combination with a second frame and
projector for applications requiring multiple units eg. Passive 3D
Installations.. The stack frame has mounting holes for truss hooks or
chains. A projector mount (392311b) is necessary to fix the projector
to the stack frame (4 x M8).
Short Ceiling Mount
Part Nr: 390065b
The universal ceiling mount 390065b is a rigid and strong ceiling
mount suited for suspending EH7700 or EX855 and EW865
projectors from the ceiling.
• Maximum load 70 Kg
• Standard equipped with the patented ball-joint.
• Maximum adjustment angle 20 degrees
• Fixed length of 165 mm
• Mounting pattern 90 x 90 mm suited for EH7700 and EX855/
EW865 projector mounts
Long Ceiling Mount
Part Nr: 390061b
The universal ceiling mount 390061b is a rigid and strong ceiling
mount suited for suspending EH7700 or EX855 and EW865
projectors from the ceiling.
• Maximum load 70 Kg
• Standard equipped with the patented ball-joint
• Maximum adjustment angle 20 degrees
• Adjustable between 700-940 mm
• Mounting pattern 90 x 90 mm suited for EH7700 and EX855/
EW865 projector mounts
Projector Base Plate
Part Nr: 392311b for EH7700
Part Nr: 392315b for EX855/EW865
The above will need a projector base plate, EH7700 (392311b) and
the EX855/EW865 (392315b).
Both base plates use 4 x M8 screws to attach your projector and the
ceiling mount plate uses 4 x M6.

Accessories Continued
17990 Flight Case EH7700
Heavy Duty flight case with wheels and handles and can also
carry two extra lens plus space for cables and remote.
• Part Number: 17990
• Weight 32Kg
• Shipping dimensions 930 x 555 x 445mm

Accessories Continued
Optimised edge blending
(Available direct from Optoma)
Optoma have worked in partnership with Calibre to produce
special versions of Calibre’s edge blending and warping
products optimised for use with our ProScene projectors. This
unique collaboration significantly reduces the complexity and
configuration time required to edge blend multiple ProScene
projectors and is covered by the industry leading ProScene
technical support services should you require assistance with
your edge blending project.
HQView320 HQV™ Scaler with Warp and Edge Blend
Best in class professional image processing in a compact
affordable module.
HQView325 HQV™ Scaler with Warp Mapping Edge Blend &
HDMI/DVI In/Out
HQView325 features 4-sided soft edge blend with multi-region
black level correction for seamless blending of multiple projectors.
HQView520 Universal HQV™ Scaler–Switcher-Scan Converter
with Warp, Edge Blend & 3G-SDI In/Out
Use as a routing switcher and universal interface for 3G-SDI,
HD-SDI, DVI or HDMI
HQView530 LED Screen HQV™Scaler-Switcher with 3G-SDI
LEDView530 is a highly flexible LED video screen image scaler
which provides stunning image quality for professional, broadcast,
sports, digital signage & corporate AV.

Offices
Optoma Europe
Optoma Europe Ltd.
42 Caxton Way
The Watford Business Park
Watford
Hertfordshire
WD18 8QZ
UK
Tel: [phone]
Fax: [phone]
Optoma Deutschland GmbH
WIESENSTRASSE 21
D40549 Düsseldorf
Germany
Tel: [phone]
Fax: [phone]
Optoma France
Batiment E
81-83 avenue Edouard Vaillant
92100 Boulogne Billancourt
France
Tel. : [phone]
Fax: [phone]
Optoma Spain
C/ José Hierro,36 Of. 1C
28529 Rivas VaciaMadrid
Madrid
Spain
Tel: [phone]
Fax: + 34 91 670 08 32
Optoma Benelux
Optoma Benelux BV
Randstad 22-123
1316 BW Almere
The Netherlands
T: [phone]
F: + 31 (0)36 548 9052
Local Representatives
Turkey
UAE
Poland
Russia
Italy
Optoma Scandinavia
Optoma Scandinavia
Lerpeveien 25
Postboks 9515 Åskollen
3038 Drammen
Norway
Tel: [phone]
Fax: [phone]
Optoma USA
Optoma USA Headquarters
3178 Laurelview Ct.
Fremont, CA 94538
Tel: [phone]
Fax: [phone]
Atlanta Sales Office
7000 Central Park NE, Suite 570,
Atlanta, GA 30328
Tel: [phone]
Fax: [phone]
Canadian Sales Office
2420 Meadowpine Blvd, Suite 105,
Mississauga, ON L5N 6S2, CANADA
Tel: [phone]
Optoma Asia
Taiwan
Optoma Corporation
Taipei Office
5F., No. 108, Minchiuan Rd. , Shindian City,
Taipei Taiwan 231, R.O.C.
Tel:：[phone]
Fax:：[phone]
http://www.optoma.com.tw
Taichung Office
7F-5, No.3, Lane 2, 1st Rd, Taichung Industrial
Park, Xitun Dist., Taichung City, 40767, Taiwan,
R.O.C.
Tel:：[phone]
Fax:：[phone]
Kaohsiung Office
Rm. D, 7F, No.108, Zhonghua 3rd Rd., Qianjin
Dist., Kaohsiung City 80145, Taiwan, R.O.C.
Tel:：[phone]
Fax:：[phone]
China
Shanghai Office
5F, No. 1205 Kaixuan Road, Changning
District , Shanghai
Tel: [phone]
Fax: [phone]
http://www.optoma.com.cn
Beijing Office
20D apartment 3, Build No.3, Yindu Tower, No
48 ZhiChun road, HaiDian district, Beijing
Tel: [phone]
Fax: [phone] *8018
ShenYang Office
Room1201, building C3, Wulihe Tower, No 4-1
WenTi road, HePing district, ShenYang
Tel:：[phone]
Fax:：[phone]-808
Xi’an Office
Room 1310, building B, ShiMao tower,
GuanDongZheng street, Xi’an
Tel: [phone]
Fax: [phone]
GungZhou Office
Room 602, NanTie Tower, No.57
No.1ZhongShan road, YueXiu district,
GungZhou
Tel: [phone]
Fax: [phone]
ChongQing Office
Room 9-2, building 19 HuaYuMingDu,
ShiQiaoPu, ChongQing
Tel: [phone]
Fax: [phone]
ChengDu Office
Room A3 floor 20, building A Time digital
square, No.1 South RenMin road, ChengDu
Tel: [phone]
Hong Kong Office
Unit A, 27/F., Dragon Centre, 79 Wing Hong
Street, Cheung Sha Wan, Kowloon, Hong Kong
Tel:：[phone]
Fax:：[phone]
http://www.optoma.com.hk
Worldwide technical and commercial support

Optoma Europe Ltd.
42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK. WD18 8QZ
www.optoma.eu
1Restrictions may apply, please check the Optoma website for more information. Brightness and lamp lifetime will vary depending on selected projector mode, environmental conditions and usage. As is common with all lamp based
projectors, brightness will decrease over the lamp lifetime. Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions. Optoma guarantees that in normal use, Optoma DLP®colour quality
will be indistinguishable from when new. Exclusions: (a) Guarantee is voided if the projector is subject to damage through misuse. (b) Guarantee may be void in industrial or commercial entertainment environments where dust or smoke is
excessive (c) Guarantee will not apply if lamp brightness is below 50% due to wear or if the projector is not working due to other faults. (d) Over time worn lamps within all projector types will show a slight colour variance. Copyright © 2011,
Optoma Europe Ltd. All other product names and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective owners. Crestron®, the Crestron and RoomView®logo are
registered trademarks of Crestron Electronics, Inc. Errors and omissions excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of Texas Instruments. All images of
products are for representation purposes only. Whilst every care is taken to provide accurate images of our products, actual products may differ slightly. Some product images may have been digitally altered by us to add an Optoma logo to
the front panel. Optoma reserves the right to amend or alter actual product or product images without notice. Some images may be simulated.
V11 - 30/05/13