Optoma Pico Pocket User manual

FOCUS
PICO POCKET PROJECTOR
USER’SMANUAL

2
1. Do not block any ventilation openings.
To ensure reliable operation of the
projector and to protect from over
heating, it is recommended to install
the projector in a location that does not
block ventilation. As an example, do not
place the projector on a crowded coffee
table, sofa, bed, etc. Do not put the
projector in an enclosure such as a book
!"#$%&'%"%!"()*$+%+,"+%'$#+')!+#%")'%-&./
2. Do not use the projector near water or
0&)#+1'$/%2&%'$31!$%+,$%')#4%&5%6'$%"*37
or electric shock, do not expose the
projector to rain or moisture.
3. Do not install near heat sources such as
radiators, heaters, stoves or any other
"88"'"+1#%#1!,%"#%"089)6$'#%+,"+%$0)+#%
heat.
4. Do not use the projector in direct
sunlight.
5. Do not use near any appliance
:$*$'"+)*:%"%#+'&*:%0":*$+)!%6$93/
6. Do not use the projector in areas
susceptible to excessive dust and dirt.
7. Turn off the product before cleaning.
8. Turn off the product before removing
the battery.
9. Disconnect the battery if the product is
not being used for a long period of time.
10. Ensure that the ambient room
temperature is within 5- 35°C.
11. Relative Humidity is 5 - 35°C, 80%
(Max.), non-condensing.
12. Do not expose the battery to
temperatures above +60°C (+140°F)
13. New or idle batteries can have short-
term reduced capacity. Fully charge the
battery before initial use.
14. Do not put the battery into your mouth.
15. Do not let the battery contacts touch
another metal object.
16. Do not drop, throw or try to bend your
product.
;</%=">%$?89&3$%)5%3)#8&#$3%&5%)*%6'$/
18. Clean only with dry cloth.
;@/%A*9>%1#$%"++"!,0$*+#7"!!$##&')es
#8$!)6$3%(>%+,$%0"*15"!+1'$'/
20. Do not use the unit if it has been
physically damaged or abused. Physical
3"0":$7"(1#$%.&193%($%B(1+%*&+%
limited to):
!C%Unit has been dropped.
!C%Charger or plug has been damaged.
!C%Liquid has been spilled on to the
projector.
!C%Projector has been exposed to rain or
moisture.
!C%Something has fallen in the projector
or something is loose inside.
Do not attempt to service the unit
yourself. Opening or removing covers
may expose you to dangerous voltages
or other hazards. Please contact your
local reseller or service center before you
send the unit for repair.
21. Do not let objects or liquids enter the
projector. They may touch dangerous
voltage points and short out parts that
!&193%'$#19+%)*%6'$%&'%$9$!+')!%#,&!4/
22. See projector enclosure for safety related
markings.
23. The unit should only be repaired by
appropriate service personnel.
24. Do not touch the projector for a long
time while the projector is used.
25. CAUTION: Risk of Explosion if Battery
is replaced by an Incorrect Type.
26. Dispose of Used Batteries According to
the Instructions.
IMPORTANT SAFETY INSTRUCTION
EYE SAFETY WARNINGS
DE&)3%#+"')*:75"!)*:%3)'$!+9>%)*+&%+,$%8'&F$!+&'%($"0%"+%"99%+)0$#/%G$$8%>&1'%("!4%
to the beam as much as possible.
A stick or laser pointer is recommended to avoid the need for the user to enter
the beam.
When projector is used in a classroom, adequately supervise students when they
are asked to point out something on the screen.
In order to minimize power, use room blinds to reduce ambient light levels.
CLASS 1 LED PRODUCT
This appendix lists the general notices of
your Projector.
FCC notice
This device has been tested and found to
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This device generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications.
However, there is no guarantee that inter-
ference will not occur in a particular instal-
lation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the
device off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
H%I$&')$*+%&'%'$9&!"+$%+,$%'$!$)E)*:%
antenna.
H%J*!'$"#$%+,$%#$8"'"+)&*%($+.$$*%+,$%
device and receiver.
H%K&**$!+%+,$%3$E)!$%)*+&%"*%&1+9$+%&*%
a circuit different from that to which
the receiver is connected.
H%K&*#19+%+,$%3$"9$'%&'%"*%$?8$')$*!$3%
'"3)&7+$9$E)#)&*%+$!,*)!)"*%5&'%,$98/
Notice: Shielded cables
All connections to other computing
devices must be made using shielded
cables to maintain compliance with
FCC regulations.
Caution
K,"*:$#%&'%0&3)6!"+)&*#%*&+%
expressly approved by the manufac-
turer could void the user’s authority,
which is granted by the Federal
Communications Commission, to
operate this device.
Operation conditions
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions:
1. this device may not cause harmful
interference, and
2. this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus complies with Canadian
ICES-003.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numerique de la classe B est conforme a la
norme NMB-003 du Canada.
Declaration of Conformity for EU countries
H%%L=K%M)'$!+)E$%NOOP7;OQ7LK%B)*!913)*:%
amendments)
H%%R&.%S&9+":$%M)'$!+)E$%NOOT7@U7LK
H%%I%V%22L%M)'$!+)E$%;@@@7U7LK%B)5%8'&31!+%,"#%
RF function)
REGULATION & SAFETY NOTICES DISPOSAL OF OLD ELECTRICAL & ELECTRONIC
EQUIPMENT
(Applicable throughout the European Union and other European countries with
separate collection programs)
This symbol found on your product or on its packaging, indicates that this product should
not be treated as household waste when you wish to dispose of it. Instead, it should be
handed over to an applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences to the environment and human health, which could
otherwise be caused by inappropriate disposal of this product. The recycling of materials
will help to conserve natural resources.
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or
dealer and ask for the correct method of disposal.
The requirements for the gloss of housing apply to peripheral devices used
"+%+,$%E)#1"9%3)#89">%.&'489"!$%"!!&'3)*:%+&%W)93#!,"'(S/%X$')8,$'"9%3$E)!$#%
intended for use outside the visual display workplace can receive a GS-Mark
)5%+,$%#!&8$%)#%)*3)!"+$3%)*%+,$%Y#$'Z#%="*1"9%"#%.$99%"#%+,$%!$'+)6!"+$/
That means the following wording is possible in situations where the use
.)+,)*%+,$%6$93%&5%E)$.%)#%*&+%)*+$*3$3%"*3%.,$'$%#156!)$*+%,)*+#%"'$%:)E$*%
in the User’s Manual for the avoidance of such situations to ensure that
display work is not affected.
[&'3)*:%)*%+,$%!$'+)6!"+$\%]2,)#%3$E)!$%)#%*&+%)*+$*3$3%5&'%1#$%)*%+,$%3)'$!+%
6$93%&5%E)$.%"+%E)#1"9%3)#89">%.&'489"!$#/%2&%"E&)3%)*!&00&3)*:%'$-$?)&*#%
at visual display workplaces this device must not be placed in the direct
6$93%&5%E)$./^
A.2.9.31 GLOSS OF HOUSING OF PERIPHERAL
DEVICES (15TH / 22 MEETING AG1 EK1):
2
2
22
2
2
2

3
PRODUCT OVERVIEW
PACKAGE OVERVIEW
Standard Accessory
1. Power adaptor with AC plug
2. VGA cable
3. USB to micro USB cable
4. Battery
5. AV cable
6. Remote control
Optional Accessory
7. Mini HDMI cable
8. iPod connection kit
a. USB cable for iPod connector
b. iPod cable
c. iPod connector
9. Component cable
10. Universal I/O to USB female
cable
3
3
3
3
3
3
3
3
FOCUS
Universal
I/O
mini
HDMI AV IN
DC IN Audio out
Micro
USB
micro SD
7
1
22
23
21
10
15
20
16
17
18
19
9
812
13
14
11
3
2
6
4
5
PRODUCT OVERVIEW
PACKAGE OVERVIEW
1. Remove the battery cover. (1~3)
2. Align the battery contacts with
the contacts in the battery
compartment. (4)
3. Push the battery to secure it in
place. (5)
4. Slide the battery cover back into
place. (6)
1
5
8b
<Note>
The standard accessories may vary in each
region due to different applications.
6
8c
2
7
3
8a
9
4
<Note>
The inclusive power plug head varies per
region.
1. Lens
2. Right Button ( )
3. Cancel / ESC Button ( )
4. Up Button ( )
5. OK Button ( )
6. Left Button ( )
7. Focus Dial
8. Down Button ( )
9. Home Button ( )
10. LED Indicator
11. Lanyard
12. Speaker
<Note>
Items 2~6 and 8 are also function buttons. Functions vary depending on the current mode.
10
Bright
OFF
VideoVGA HDMI
1
2
3
4
5
6
INSTALL THE BATTERY
Bright
OFF
VideoVGA HDMI
1
3
4
7
9
10
11
12
2
5
6
8
Remote Control
1. Power Button
2. Up Button ( )
3. OK Button ( )
4. Left Button ( )
5. Down Button ( )
6. Home Button ( )
7. VGA Button
8. HDMI Button
9. Bright Button
10. Cancel / ESC Button ( )
11. Right Button ( )
12. Video Button
13. DC Input
14. Audio Out Connector
15. IR Receiver
16. Universal I/O Connector
17. Mini HDMI Connector
18. AV Input Connector
19. Micro USB Port
20. MicroSD Card Slot
21. Battery Cover
22 Screw Hole for Tripod Converter
23. Power Button

4
CHARGE THE BATTERY POWER ON/ OFF
44
44
4
4
4
4
4
4
4
PUSH
1
1. Make sure the projector is turned
off.
2. Insert the plug. (1)
3. Connect the power adapter.
(2~3)
4. During charging, the LED indicator
lights red. (4)
5. The LED indicator turns green
when the battery is fully charged.
This process may take up to 2.5
hours.
3
2
Press the Power button to turn the
projector on or off.
For first time use, the Language
screen appears.
1. Highlight the desired language.
()
2. Select the item. (
)
<Note>
1. Bright mode is only available when the
power adapter is connected.
2. The battery will not charge while the
projector is operating.
3. For LED indicator information, see page
23.
4. After the projector is turned off, the
battery may not start charging right away
due to over temperature protection. The
projector will automatically start charging
once it cools off.
5. The battery has a lifespan and ages every
time it is charged and discharged. It will
gradually lose its charging capability as
it ages. Replace the battery at the end of
its lifespan.
When the low battery icon (
) is
displayed on the projected screen,
replace the battery immediately or
connect the power adapter to charge
the battery.
4
CONNECT INPUT SOURCE - HDMI
in
in
1
2
1. Connect the HDMI device using
an appropriate cable. (1~2)
Insert the universal connector
with the arrow mark facing up.
2. After powering on the projector,
the projector automatically detects
the input source. Otherwise,
press to open the Input menu.
(See page 19)
3. Press to select HDMI.
in
in
1
2
1
2
or
or
<Note>
HDMI cable is not included in the•
package.
Mini DisplayPort to HDMI Adapter•
(optional) is sold at Apple stores.
Mini DisplayPort to
HDMI Adapter
CONNECT INPUT SOURCE - VGA
1
2
in
in
1
2
Mini DisplayPort to
VGA Adapter
1. Connect the VGA device using
the appropriate cable. (1~2)
Insert the universal connector
with the arrow mark facing up.
2. After powering on the projector,
the projector automatically detects
the input source. Otherwise,
press to open the Input menu.
(See page 19)
3. Press to select VGA.
<Note>
Mini DisplayPort to VGA Adapter (optional)
is sold at Apple stores.
or
Mac Mac

5
55
5
55
5
5
5
5
1
2
For video and
audio input
Image Size Chart
Projection Dis-
tance (A) Screen Size - Width (B) Screen Size - Height (C) Screen Diagonal (D)
Meter inch (mm) (inch) (mm) (inch) (mm) (inch)
0.2 7.87 110 4.3 62.7 2.5 127 5
0.4 15.75 221 8.7 125.4 4.9 254 10
0.6 23.62 331 13.0 188.1 7.4 381 15
0.8 31.5 448 17.4 250.8 9.9 508 20
2.4 94.49 1325 52.2 752.3 29.6 1524 60
4.8 189 2651 104.4 1504.5 59.2 3048 120
5.98 235 3321 130.8 1867 73.5 3810 150
ADJUST THE PROJECTED IMAGE
By default, the projector displays from
the internal memory. However if a
microSD card is inserted, the projector
reads from the microSD card first.
Insert a microSD card into the slot with
the gold contacts facing down.
To remove the microSD card, push the
card to eject it from the slot.
<Note>
Do not remove the microSD card while•
the projector is projecting image from
the card. This can cause data loss or
damage the card.
Supports microSD card size up to 32GB.•
The microSD card is not included in the•
package.
MicroSD format on Windows system•
must be in FAT32 format.
INSERT DATA SOURCE - MICROSD CARDCONNECT INPUT SOURCE - VIDEO IN / AUDIO IN
1. Connect the AV device using the
appropriate cable. (1~2)
2. Connect external speakers to the
audio out connector of the projector.
(3)
2. After powering on the projector, the
projector automatically detects the
input source. Otherwise,
press
to open the Input menu.
(See page 19)
3. Press to select Video.
<Note>
1. All other brand and product names are
trademarks or registered trademarks of
their respective companies.
2. The cables connecting the video output
devices are not supplied, please contact
the device vendor.
3. iPad/iPod nano/iPod touch/iPhone/iPod
classic (version 5 and above)
4. Designed for iPod/iPhone/Mobile phone/
PMP with TV out functions. Using with
devices with audio signal voltage >
0.3Vrms is not recommended.
5. The optional USB cable for iPod Connector
is used to charge the iPod device using a
computer.
3
1
2
or
1
2
Audio input
only
CONNECT COMPUTER FOR DATA TRANSFER
1
2
MOLEX
You can transfer data to the projector
internal memory or the microSD
card.
Connect a laptop or PC using the
supplied USB to micro USB cable.
See "How to Transfer Data via USB"
on page .
<Note>
The laptop/PC can only detect the input
source when the projector is switched on.
The projection will stop when this connection
is made.
The projector reads data from the
USB flash drive first if a USB flash
drive is inserted.
Connect the USB flash drive to the
projector using a Universal I/O to USB
female cable. (1~2)
INSERT DATA SOURCE - USB (EXTERNAL SOURCE)
<Note>
1. USB cable (for flash drive) is not included
in the package.
2. The projector only supports USB flash
drive (up to 5V/150mA) with FAT32
format.
3. USB hard disk drive is not supported.
2
1
The projector projects media files
directly from data sources: internal
memory, microSD card, or external
source via USB female cable
FOCUS
Screw a standard tripod into the screw
hole on the projector.
<Note>
The tripod is an optional accessory.
USE ATRIPOD STAND
or

FOCUS
1
Adjust the focus (1) until the image is
clear.
A a
iPod
iPod

6
6
6
66
6
6
6
6
6
6
6
Home menu
Submenu Items
Video menu
HOW TO USE THE MENU
<Note>
A button guide appears on the lower left corner of most screens (see below). The guide
varies depending on the current mode. Press the corresponding button to select the option or
operation.
!" Press the corresponding button of the desired option.
!" Press to go back a previous screen.
Enter Video menu
Select input
source signal
Enter Photo menu
Enter Setup menu
Enter Music menu #$%&'"()*+&",-&.&'"/&$0
Return to the Home
menu
Press the corresponding button of the menu item that you want to access.
For example, to access Video, press .
Music menu
Video
Internal
Memory
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
Music
Internal
Memory
1/1
Summer.mp3 03:31
Rainbow.mp3 04:28
Blue.mp3 03:20
Cat.mp3 03:45
Black Sheep.mp3 03:02
Video menu
Photo
Internal
Memory
1/2
Photo menu
Input menu
Office Viewer
Internal
Memory
1/1
Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Video VGA Back
HDMI
Input
()*+&",-&.&'"/&$0
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
Setup menu
Video
Internal
Memory
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
Submenu
Data source icon
The projector reads from memory sources in the following order:
External source (USB) » microSD card » internal memory.
External source Internal memory
MicroSD card
Button guide
Press the corresponding button to
select the option or operation.

7
7
7
7
77
7
7
7
7
Playing Videos from the Internal Memory, MicroSD Card, or External Source
HOW TO PLAY VIDEOS - SOURCE: INTERNAL MEMORY / USB FLASH DRIVE / MICROSD CARD / EXTERNAL SOURCE
If an external source (USB) is inserted, the
external memory is read first. If you want to read
data from the microSD card or internal memory,
press in the appropriate screen to change the
data source. See steps below.
Play from start?
No
Playback
from start
Playback from
last point
Video Playback mode (see page 8)
Yes
Video
External
Memory
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
Video
MicroSD
Card
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
Video
Internal
Memory
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
Change data
source
Change data
source
Change data
source
<Note>
The displayed screen may vary depending on the
selected data source on the previous step.
Video
Internal
Memory
Travel
Travel Day1.mkv
Travel Day2.mkv
Travel Day3.mkv
1. Select "Video"
2. Select Data Source
3. Select Video File
4. Playback File
or
The screen, the source icon on the button guide,
and the sequence in which screens appear vary
depending on the available data source. If the
external source or microSD card is not inserted,
its screen is skipped when is pressed and the
source icon on the button guide is not shown.

8
8
8
88
8
8
8
8
8
8
8
Repeat Icons
Repeat all
Repeat one
Repeat off
<Note>
To change repeat settings, see Video
Settings below.
<Note>
!" 12"+234"5-6&2"*7&89"%:&"5-6&2"*7&"8-;&"
/08%"$2%"&<+&&6"=>"?$6"%:&"5-6&2"*7&"
being copied is from a computer or an
SD card with FAT32 format.
!" Video format does not support content
with B-Frame function.
File Format Video Decoder Audio or Speech
Decoder
.3gp H.263
H.264 HE-AAC
.avi
H.263
H.264
MPEG4
Xvid
MP3
HE-AAC
PCM/G.711
COMPATIBILITY: VIDEOS
File Format Video Decoder Audio or Speech
Decoder
.cmb H.264 HE-AAC
@A5 Soreson Spark MP3
.mp4
H.263
H.264
MPEG4
MP3
HE-AAC
File Format Video Decoder Audio or Speech
Decoder
.mov
H.263
H.264
MPEG4
MP3
HE-AAC
PCM/G.711
.wmv
.asf
MPEG4 SP
VC-1 (WMV9) WMA
.ts MPEG2 MP3
Compatible Video Format
HOW TO PLAY VIDEOS - VIDEO PLAYBACK MODE
VIDEO SETTINGS
Repeat all
Repeat one
Repeat off
Browser display:
list view
Browser display:
thumbnail view
Repeat Browser Display Back
Video Setting
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
<Note>
The button guide disappears when the
keypad is not used for 3 seconds.
To display the button guide, press any key
except or .
Adjust volume
Pause/Play
Fast forward
Rewind
Return to Home menu
Back to previous
screen
1. Select "Setup" 2.
Select "Video Setting"
3. Adjust Settings

9
9
9
9
99
9
9
9
9
9
Playing Music from the Internal Memory, MicroSD Card, or External Source
HOW TO PLAY MUSIC - SOURCE: INTERNAL MEMORY / USB FLASH DRIVE / MICROSD CARD / EXTERNAL SOURCE
If an external source (USB) is inserted, the
external memory is read first. If you want to read
data from the microSD card or internal memory,
press in the appropriate screen to change the
data source. See steps below.
Music
External
Memory
1/1
Summer.mp3 03:31
Rainbow.mp3 04:28
Blue.mp3 03:20
Cat.mp3 03:45
Black Sheep.mp3 03:02
Music
MicroSD
Card
1/1
Summer.mp3 03:31
Rainbow.mp3 04:28
Blue.mp3 03:20
Cat.mp3 03:45
Black Sheep.mp3 03:02
Music
Internal
Memory
1/1
Summer.mp3 03:31
Rainbow.mp3 04:28
Blue.mp3 03:20
Cat.mp3 03:45
Black Sheep.mp3 03:02
Next Song: Rainbow.mp3
Summer
Unknow
Unknow
Music Playback mode (see page 10)
Change data
source
Change data
source
Change data
source
<Note>
The displayed screen may vary depending on the
selected data source on the previous step.
Music
Internal
Memory
1/1
Summer.mp3 03:31
Rainbow.mp3 04:28
Blue.mp3 03:20
Cat.mp3 03:45
Black Sheep.mp3 03:02
1. Select "Music"
2. Select Data Source
3. Select Music File
4. Playback File
or
The screen, the source icon on the button guide,
and the sequence in which screens appear vary
depending on the available data source. If the
external source or microSD card is not inserted,
its screen is skipped when is pressed and the
source icon on the button guide is not shown.

10
Next Song: Rainbow.mp3
Summer
Unknow
Unknow
10
10
10
10
1010
10
10
10
10
10
10
10
10
1010
10
COMPATIBILITY: MUSIC
HOW TO PLAY MUSIC - PLAYBACK MODE
MUSIC SETTINGS
Repeat Shuffle Back
Music Setting
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
B&3&?%"C"D:0)A&"E+2$8
Repeat all
Repeat one
Repeat off
D:0)A&"2$
D:0)A&"2))
<Note>
12"+:?$F&"'&3&?%"2'"8:0)A&"8&%%-$F89"8&&"
Music Settings below.
Compatible Audio Format
File Format Audio Decoder
.aac HE-AAC
.asf WMA9
@A?+ FLAC
.mp3 MP3
.ogg Vorbis
.ra RA 6, 9, 10
.wma WMA9
.wav PCM
Repeat all
Repeat one
Repeat off
D:0)A&"2$
D:0)A&"2))
<Note>
The button guide disappears when the
keypad is not used for 3 seconds.
To display the button guide, press any key
except or .
Adjust volume
Pause/Play
Next track
Previous track
Return to Home menu
Back to previous
screen
Fast forward (press and hold)
Rewind (press and hold)
1. Select "Setup" 2.
Select "Music Setting"
3.
Adjust Settings

11
11
1111
11
11
11
1111
11
11
11
11
11
11
Viewing Photos from the Internal Memory, MicroSD Card, or External Source
HOW TO VIEW PHOTOS - SOURCE: INTERNAL MEMORY / USB FLASH DRIVE / MICROSD CARD / EXTERNAL SOURCE
If an external source (USB) is inserted, the
external memory is read first. If you want to read
data from the microSD card or internal memory,
press in the appropriate screen to change the
data source. See steps below.
Full Screen mode (see page 12)
Photo
External
Memory
1/2
Photo
MicroSD
Card
1/2
Photo
Internal
Memory
1/2
Change data
source
Change data
source
Change data
source
Photo
Internal
Memory
2/2
Page indicator
Photo
Internal
Memory
1/2
<Note>
The displayed screen may vary depending on the
selected data source on the previous step.
1. Select "Photo"
2. Select Data Source
3. Select Page
4.
Enter Current Page
or
5. Browse Thumbnails
6. Preview File
The screen, the source icon on the button guide,
and the sequence in which screens appear vary
depending on the available data source. If the
external source or microSD card is not inserted,
its screen is skipped when is pressed and the
source icon on the button guide is not shown.

12
12
12
12
12
1212
12
12
12
12
12
12
12
12
12
12
HOW TO VIEW PHOTOS - FULL SCREEN MODE
In Slideshow mode, photos are played
+2$%-$020874"?%"?"83&+-*&6"-$%&'5?7"
time while playing music stored in the
internal memory as background.
<Note>
!" Make sure that background music setting is
"On" to enable this feature.
!" D?5&"%:&"/08-+"*7&8"GH@/3I")2'/?%J"0$6&'"
the "Slideshow Music" folder in the internal
memory.
!" ($74"/08-+"*7&8"8%2'&6"-$"%:&"-$%&'$?7"
memory "Slideshow Music" folder can be
played as background music.
<Note>
To change slideshow interval settings and
enable/disable background music, see
Slideshow Settings below.
Play slideshow
Next photo
Previous photo Return to Home menu
Rotate 90°
counter-clockwise
Rotate 90° clockwise
Full screen mode Slideshow mode
Photo
Internal
Memory
1/2
Exit slideshow
<Note>
The button guide disappears when the keypad is not used for 3 seconds.
To display the button guide, press any key except or .
Pause/Play slideshow
Next photo
Previous photo Return to Home menu
Volume down
Volume up
Exit slideshow
HOW TO VIEW PHOTOS - SLIDESHOW MODE
1. Enter Slideshow Mode 2. View Slideshow 3. Exit Slideshow Mode

13
Timer: 2-second
interval
Timer: 5-second
interval
Timer: 10-second
interval
Background music on
Background music off
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
13
1313
13
13
13
1313
13
13
13
13
13
13
13
SLIDESHOW SETTINGS
1. Select "Setup" 2. Select "Slideshow" 3. Adjust Settings
COMPATIBILITY: PHOTO
Compatible Photo Format
File Format File Extension
BMP
JPG
JPEG
*.bmp,
*.jpg
*.jpeg
<Note>
The projector supports the following photo
resolution:
Bitmap file up to 2M (megapixels) each•
Jpeg file up to 10M (megapixels) each•
If a photo resolution is over these
limitations, the file will not be shown in the
file directory screen.
<Note>
For optimum display performance of
static photos or slide show playback, it is
recommended to use smaller file size and
lower resolution photos.

14
14
14
14
14
1414
14
14
14
14
14
14
14
14
1414
14
Viewing Documents from the Internal Memory, MicroSD Card, or External Source
HOW TO VIEW DOCUMENTS - SOURCE: INTERNAL MEMORY / USB FLASH DRIVE / MICROSD CARD / EXTERNAL SOURCE
COMPATIBILITY: DOCUMENT
The projector uses Picsel File Viewer
to open and view Microsoft®"K2'6"*7&8"
and Adobe®"LMN"*7&8@
Supported Versions
Version
Microsoft
®
"()*+&"OP
Microsoft
®
"()*+&"OQ
Microsoft
®
"()*+&"RSSS
Microsoft
®
"()*+&"RSSI
Microsoft
®
"()*+&"RSSQ
Microsoft
®
"()*+&"RSTS
Adobe
®
PDF 1.0 ~ 1.4
<Note>
!" "()*+&",-&.&'"80332'%8"&/U&66&6"
fonts in Adobe®PDF documents but not
in Microsoft®Word documents.
!" Embedded fonts are used in priority
over the projector system fonts.
Compatible Document Format
File Format File Extension
Microsoft
®
"()*+&"V337-+?%-2$"
(Word, Excel, Power Point)
Adobe
®
PDF
.doc
.docx
.ppt
.pptx
.xls
.xlsx
.pdf
Font / Language Support
The projector has limited font
support. When a document with
0$80332'%&6")2$%"-8"23&$&69"()*+&"
Viewer automatically substitutes the
unsupported font with default system
fonts. This may cause the document
layout to look different.
The projector supports one default font
for each of the following languages.
Japanese
Korean
Polish
Iberian Portuguese
Russian
Spanish
Swedish
Thai
Turkish
Vientamese
Traditional Chinese
D-/37-*&6"W:-$&8&
Arabic
Albanian
Brazilian Portuguese
Bulgarian
Croatian
Estonian
Finnish
Greek
Slovenian
Serbian
Latvian
Lithuanian
Macedonian
Norwegian
Romanian
Latin American (Español)
Slovakian
Indonesian
If an external source (USB) is inserted, the
external memory is read first. If you want to read
data from the microSD card or internal memory,
press in the appropriate screen to change the
data source. See steps below.
Office Viewer
External
Memory
1/1
Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Office Viewer
MicroSD
Card
1/1
Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Office Viewer
Internal
Memory
1/1
Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
Change data
source
Change data
source
Change data
source
FOCUS
View mode (see page 14)
<Note>
The displayed screen may vary depending on the
selected data source on the previous step.
Office Viewer
Internal
Memory
1/1
Summer.doc 128 KB
Rainbow.ptt 1,211 KB
Blue.xls 143 KB
Cat.doc 165 KB
Black Sheep.doc 256 KB
1.
Select "Office Viewer"
2. Select Data Source
3. Select File
4. View File
or
The screen, the source icon on the button guide,
and the sequence in which screens appear vary
depending on the available data source. If the
external source or microSD card is not inserted,
its screen is skipped when is pressed and the
source icon on the button guide is not shown.
Font / Language
Czech
Danish
Dutch
English
French
German
Hungarian
Italian

15
15
1515
15
15
15
1515
15
15
15
15
15
15
15
HOW TO VIEW DOCUMENTS - VIEW MODE
LED Mode Color Mode Back
Aspect Ratio Gamma Projection
Display Setting
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
DISPLAY SETTINGS
<Note>
The button guide disappears when the
keypad is not used for 3 seconds.
To display the button guide, press any key
except or .
FOCUS
Zoom in 1x ~ 4x
Pan up, down,
left, right
(in zoom mode)
Page up Move right
Move left
Page down Exit View mode
Return to Home menu
LED Mode: Movie
(available only when the
power adapter is plugged)
LED Mode: Bright
(available only when the
power adapter is plugged)
LED Mode: Standard
LED Mode: ECO
Color Mode: Extended
Color Mode: Standard
Gamma: Standard
Gamma: Presentation
Gamma: Bright
Gamma: Movie
Aspect Ratio: Auto
Aspect Ratio: 4:3
Aspect Ratio: 16:9
Projection: Front Desktop
Projection: Front Inverted
Projection: Rear Desktop
Projection: Rear Inverted
1. Select "Setup" 2. Select "Display Setting" 3. Adjust Settings

16
16
16
16
16
1616
16
16
16
16
16
16
16
16
1616
16
SELECT MENU LANGUAGE
Language Information Back
Firmware Update Reset
System
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
Select your preferred menu language.
Options are: English, French, Spanish, Portuguese
(Brazilian), German, Italian, Russian, Polish, Dutch,
D.&6-8:9">'&&X9"1'?6-%-2$?7"W:-$&8&9"D-/37-*&6"
Chinese, Korean, Japanese
VIEW PROJECTOR INFORMATION
Language Information Back
Firmware Update Reset
System
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
MicroSD card
capacity
Internal memory
capacity
External memory
(USB) capacity
Battery charging
Power adapter
connected
1. Select "Setup" 2. Select "System" 3. Select "Language"
4. Select Language
1. Select "Setup" 2. Select "System" 3.
Select "Information"
4. View Information 5.
Return to Home Menu
5. Confirm language /
Return to Home menu

17
17
1717
17
17
17
1717
17
17
17
17
17
17
17
UPGRADE FIRMWARE
Language Information Back
Firmware Update Reset
System
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
New firmware 1.2 found.
Upgrade the firmware?
Software updates can be obtained from the OPTOMA website
(
www.optoma.com / www.optoma.eu / www.optoma.com.tw ).
1. On your computer, create a folder named "upgrade".
R@" M2.$72?6"%:&"7?%&8%"*'/.?'&")'2/"www.optoma.com and save it in the "upgrade"
folder.
3. Copy the "upgrade" folder to the root folder of the microSD card.
4. Insert the microSD card into the microSD card slot of the projector.
5. Follow the steps below.
Yes
No
<Note>
!" Do not touch any buttons or turn off the
projector while upgrading is in progress.
Otherwise, this may damage the projector.
!" Do not remove the microSD card until the
upgrade is complete.
<Note>
V"YZ2"$&."*'/.?'&"-8")20$6Y"/&88?F&"
?33&?'8"-)"%:&'&"-8"$2"036?%&"*7&"-$"%:&"
microSD card.
Upgrade may take a while
to complete, do not touch any keys
1. Select "Setup" 2. Select "System"
4. Confirm Upgrade 3. Select "Firmware Update"
6. Turn Off the Projector
5. Wait to Complete
When the screen below appears, update is
complete. Press and hold the Power button for
6 seconds to turn off the projector
8.
Turn On the Projector
7.
Remove the MicroSD Card

18
18
18
18
18
1818
18
18
18
18
18
18
18
18
1818
18
RESET THE SYSTEM
<Note>
K:&$"%:&"848%&/"-8"'&8&%9"?77"*7&8"8%2'&6"-$"
the internal memory will be deleted. Ensure
?77"*7&8"?'&"U?+X&6"03"U&)2'&"'&8&%%-$F@
Resetting the System by Reset Menu
Language Information Back
Firmware Update Reset
System
Video Setting Music Setting Back
Display Setting Slideshow System
Setup
Yes
No
Reboot the projector
1. Select "Setup" 2. Select "System"
4. Confirm Reset 3. Select "Reset"

19
19
1919
19
19
19
1919
19
19
19
19
19
19
19
19
19
HOW TO USE EXTERNAL INPUT SOURCE: VGA / COMPOSITE AV / HDMI
Select Input Source
VGA
800 x 600
or
Video VGA Back
HDMI
Input
Video
VGA
HDMI
Return to Home menu
<Note>
1:&"8-F$?7"/&88?F&"U2<"U'-&A4"?33&?'8"2$"
screen; its label varies depending on the
selected input signal.
Display
button guide
Settings
Volume up
Hide button guide
Aspect ratio
Volume down
Return to Home menu
Display mode
To exit
display mode
Yes No
If more than one external device is connected to the projector or the projector
cannot automatically detect the external device, you have to manually select
the input source. To do this, perform the following steps.
Selecting Input Source Manually
1. Select "Input" 2. Select Input Source
3. Enter Display Mode
4. Adjust Volume / Settings
View Source Content
5. Exit Display Mode
Selecting Input Source
When the projector is not in playing mode nor reading from an external source,
the projector automatically detects once a video source device is connected
and turned on. A message appears on screen.
VGA is detected
Change to VGA?
10 Sec.
VGA
800 x 600
Yes
No
<Note>
Similar message appears when other external
input sources are detected.
<Note>
When multiple input source devices are
connected at the same time, the last
connected device will be detected.

20
20
20
20
2020
20
20
20
20
20
20
20
20
20
20
20
20
20
20
Adjusting Contrast Settings
INPUT SOURCE SETTINGS
Display mode
Display
button guide
16:9
AUTO
Scroll option
Scroll option
Scroll option
<Note>
When no key is pressed within 10 seconds, the
aspect ratio icon automatically disappears and its
setting is applied.
Changing Aspect Ratio Settings
Display mode
Display
button guide
<Note>
When no key is pressed within 10 seconds, the
contrast icon automatically disappears and its
setting is applied.
Exit contrast settings
Scroll other settings: Sharpness,
Color, LED, Brightness
Return to Home menu
4:3
2. Select "Aspect Ratio"
1. View Source Content
-
3. Scroll Aspect Ratio Setting
16:9
4:3
AUTO
4. Confirm Setting
1. View Source Content
2. Select "Settings" 3. Select "Contrast"
4. Adjust Setting