7
ARPEGGIATOR INSTRUCTIONS
Arpeggiator Types (up, Down, Incl, Excl, Random, Order, Repeat)
Press and hold the Arp button or press the button and rotate the knob to change the way
arpeggiator work based on BPM/Tempo.
Up: The notes will play from low to high.
Down: The notes will play from high to low.
Incl: The notes will play from low to high, and then back down. The low and highest notes will
sound twice.
Excl: The notes will play from the low to high ,and then back down. The low and highest notes
will sound just once.
Random: The notes will play randomly as they were pressed.
Order: The notes will play in order as they were pressed.
Repeat: The notes and the pads will play repeatedly.
Oct + : Shift the octave range of arpeggiator, press the key four times to go back to initial
octave range.
Latch: The arpeggiator will still work even when you lift your fingers.
Gate+, Gate - : Set the length of each note has been arpeggiated.
Tap: Tap the key to adjust the tempo of arpeggiator (Display area show the BPM).
Swing+, Swing: Set the deviation of notes, the longer the swing amount, the playing will be
groovier.
Tempo+, Tempo- : Set the tempo of the arpeggiator. you can hold the tempo+/tempo- to
continuously increase the amount.
Sync: Synchronized the tempo to the DAW, to activated SYNC you need to enable external
Midi Controller sync function inside DAW.
Note : When Sync is activated , Tempo, Tempo-,Tap, functions are invalid.
Time division : Set the rate of arpeggiator based on the tempo, (1/4, 1/4T, 1/8, 1/8T,
1/16,1/16T, 1/32, 1/32T).
