OraMetrix ASSY-000244 User manual

User Manual for Wireless Footswitch
ASSY-000244
REVISION HISTORY OF THE INSTRUCTION
Originator Document
ID
Date Description of changes
Radinger N.A. 02 October 2003 Initial
Radinger 15 October 2003 Added hint to separation distances
Radinger 29 October 2003 Added FCC statements
Document Control
Drawn
Radinger
Checked
Approved
-CONFIDENTIAL- Page: 1 of 3
T3004 Instruction regarding development, testing or manufacturing
Last printed 29.10.2003

User Manual for Wireless Footswitch
ASSY-000244
User Manual Wireless Footswitch
The Wireless footswitch ASSY-000244 can be used with the OraMetrix Scanning Station to control the
SureSmile Application program.
1.1 Technical Data:
Operating Range: 3m from Scanning Station
Battery Lifetime: At least 5 Years
Used Frequency and Modulation: 916.5MHz AM
Encoding/Decoding: 12Bit Key
1.2 Service/Battery replacement:
The wireless footswitch shall only be serviced by Orametrix personnel. The user should never open
the device. In case of a malfunction, the device should be sent to OraMetrix for service.
1.3 Encoding/Decoding:
All wireless footswitches/receivers are coded with a unique 12Bit code. See serial number of the
device for your code. It is not possible to interchange the wireless footswitches between two scanning
stations.
1.4 Use with other electrical components
Do not co-locate (<200mm distance) or operate the device in conjunction with any other antenna or
transmitter.
1.4.1 Minimum separation distances to user
Please provide a minimum separation distance of 200mm from the transmitter to the users body.
1.4.2 Minimum separation distances between footswitch transmitter and receiver
Please provide a minimum separation distance of 200mm from the footswitch transmitter to the
receiver.
1.5 RF Exposure
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
-CONFIDENTIAL- Page: 2 of 3
T3004 Instruction regarding development, testing or manufacturing
Last printed 29.10.2003

User Manual for Wireless Footswitch
ASSY-000244
Declaration of Conformity with FCC Rules for Electromagnetic Compatibility
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
1.6 Federal Communications Commission (FCC) Notice
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct the interference by
one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the distance between the equipment and the receiver.
* Connect the equipment to an outlet on a circuit different from the outlet where
the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for assistance.
1.7 Modifications
The FCC requires the user to be notified that any changes or modifications to this
device that are not expressly approved by Orametrix GmbH may void the user's
authority to operate the equipment.
-CONFIDENTIAL- Page: 3 of 3
T3004 Instruction regarding development, testing or manufacturing
Last printed 29.10.2003