Orava RBD-613 User manual

Alarmclock
RBD-613
Instruction manual EN

2EN
Designated purpose of use of equipment
The device is intended for the reception and reproduction of sound, supplemented
by the function of sound tone excitation by “radio”, or radio and television
broadcasting of audio from external sources of the device, to the extent determined
by the technical and operational parameters and functions, safety and user
instructions and external influences operating environment.
Orava electrical appliances are manufactured according to current state-of-the-art
knowledge and recognized safety and technical rules. Still, it could be wrong and
unprofessional use or use contrary to the intended use may endanger the life of the
user or a third person, or equipment and other material values.
1.GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for safe,
correct and economical operation of the electrical equipment. Its compliance helps
the user avoid risks, increase reliability and product life.
• In this document, the generic term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept of electrical
equipment in the strict sense of the word will include the following categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational
1.1 General safety instructions
• Before commissioning the unit, we recommend that you carefully read
the operating instructions and operate the equipment in accordance with the
instructions!
• The safety instructions and warnings in this manual do not cover all the possible
conditions and situations that may arise when using the device. The user must
understand that a factor that can not be incorporated into any of the products is
responsibility and caution. These factors must therefore be ensured by users /
users who use and operate this device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
• Make sure that the appliance is complete and shows no signs of damage before
using the appliance for the first time. If the product is defective or if it has any
visible damage, do not use the product.
• Keep the operating instructions as close to the device as possible throughout its
service life. Always keep the operating instructions together with the appliance for
future use and use by new users.

3EN
• Use the appliance only for the purpose for which it is intended and in the manner
specified by the manufacturer.
• The appliance is intended for home and similar indoor use, with no special focus.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during transportation,
misuse, damage or destruction of the equipment due to adverse weather
conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment.
• Always keep the operating environment clean and well lit.
• Do not place the device on an unstable surface. Overriding or dropping the device
may result in personal injury or damage to the device.
• Do not expose the unit to direct sunlight or excessive heat sources.
• Do not use an electric appliance in areas with flammable liquids, gases or dust.
The appliance may be the source of scaling, which can result in the ignition of dust
or vapors.
Features of the operating environment
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water
vapor
5. Occurrence of foreign bodies: amount and type of dust are not significant
Protection class: IP20
• Other characteristics of the operating environment (mechanical stress
- shocks and vibrations, occurrence of plant, animals, weather effects) are
negligible in terms of effect on the correct and safe use of electrical equipment.
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make sure
that the voltage on the appliance label corresponds to that of the household
electrical outlet.
• The electrical appliance is designed for mains supply 230 V ~.
The electrical safety of the appliance is guaranteed only if it is properly connected
to the electricity grid.
• Only use a power cord with a plug (mains lead) that came with the device and
compatible with a wall outlet. Using another cable may result in fire or electric
shock.
• Always connect an electrical appliance to an easily accessible power outlet. In the
event of an operating fault, the appliance must be switched off as soon as possible
and disconnected from mains supply.
• Do not pull the power cord / power cord by pulling on the cord / cord. Disconnect
the power cord by pulling the plug behind the power cord / power cord plug.
• If you use an extension cord, check that the total rated (ampere) power of all
devices connected to the extension cord does not exceed the maximum current
rating of the extension cable.
• If you need to use an extension cord or power supply block, make sure that the
extension cord or power pack is plugged into a power outlet, and not to another
extension cord or power supply. Extension power cord or power supply block must
be designed for grounded plugs and plugged into a grounded outlet.

4EN
• The power plug of the appliance must be compatible with the mains socket. Never
use any adapters or modify the socket in any other way. Do not use inappropriate
or damaged soclets.
• To avoid electrical shock, plug the power cables into properly grounded electrical
outlets. If the device is equipped with a 3-pin power supply cord, do not use
adapters that do not have a grounding element or remove the grounding element
from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power cord of the
appliance to mechanical stress or external heat sources. Damage to the power
cord may result in electric shock.
• If the power cord is damaged, disconnect the appliance from the mains and do
not use it again. If the power cord / power cord is damaged, it must be replaced by
the manufacturer, its service department, or a qualified person to avoid the risk of
electric shock.
• Regularly check and maintain the electrical appliance as well as the power cable.
Disconnect the power plug regularly and clean it if necessary. Pollution by dust or
other substances may cause disruption of the insulating state and consequently
fire.
• Do not expose the appliance to water or moisture. The ingress of water into the
appliance increases the risk of electric shock. If the power cord is wet or the
appliance gets water, disconnect it immediately from the mains. If the appliance
is plugged into a mains socket and if possible, turn off the power supply before
attempting to disconnect the power supply. If you are pulling wet wires from a live
power source, be very careful.
• If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is finished.
1.4 Safety of persons
• This appliance is intended for use by persons without an electrotechnical
qualification (layperson) according to the instructions specified by the
manufacturer.
• Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory inspection of
the equipment, and user cleaning and maintenance.
• This appliance can be used by children 8 years of age and older and persons with
reduced physical, sensory or mental abilities or lack of experience and knowledge
only when under the supervision or guidance of the responsible person have been
instructed to use the appliance in a safe way and understand the potential hazards
• Cleaning and user maintenance can be carried out by children 8 years of age and
older only under the supervision of the responsible person.
• Children may not play with the appliance.
• Always keep the appliance out of reach of children during use and operation. Be
sure to download the appliance even for a freely accessible power cord.
• Always be careful when operating the electric appliance. Do not use an electric
appliance if you are overly tired, under the influence of medication or narcotic
drugs that reduce attention and focus. Inattention during operation may result in
serious injury.

5EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance in the
recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution
and visible stains from finger contact, respectively. The hands can be cleaned
using detergent detergents specially designed to clean household appliances.
• If you do not use the appliance, clean it or disconnect the appliance from the
power supply when the appliance is faulty.
• Do not disassemble the appliance. The appliance works with a dangerous voltage.
For this reason, always switch off the appliance and disconnect it from the power
supply. In the event of a fault, please have the repair serviced by an authorized
service center.
• Only guarantee qualified and qualified personnel to repair and repair the electrical
appliance.
2. Special Safety Instructions. Read carefully!
Electrical equipment is designed and manufactured in such a way as to allow for
safe operation and use by persons without a professional qualification. Despite all
the measures taken by the manufacturer to ensure safe use, handling and use, it
carries with it certain residual risks and associated potential hazards. To warn of
possible hazards, the following symbols and their meanings have been used on
the device and in the accompanying documentation:
This symbol alerts users that the device is operating a dangerous electrical
voltage. Do not remove protective covers on the device. Failure to observe
the safety instructions during use and operation of the device may result in:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users to the following: Risk of serious injury or
life threatening when not following the safety instructions when using
and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol means that the product is made with a double insulation
between hazardous live parts (parts with dangerous voltage from the
mains) and parts that are accessible in normal use.
Transport/Carriage
• When transporting and using, for example, of the transport cart, be careful when
moving, to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the space and
the routes, which must be unobstructed.
• Never carry the machine while it is in operation. Do not carry the device while it is
plugged into a wall outlet.
• Transfer the device firmly by both hands to the bottom edge of the base or fixed
parts of the body.
• Make sure that your hands and equipment are not damp or slippery when car-
rying. There is a risk of serious injury or life threatening!
There is a risk of damage to the device!
!

6EN
Unpacking/Package
• Unpack the equipment (and accessories if equipped) before putting it into service
and remove all parts of the packaging material, labels and labels. Store the pac-
kaging in a safe place, especially out of the reach of children and unaccompanied
persons, or dispose of them safely.
• Clean the machine before commissioning as described in the „Commissioning“
section or „Cleaning and maintenance“.
• Never clean the device (and the remote control, if equipped) and the power cord
with the plug in a way that could cause the cleaning liquid to drip into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.
• Only clean the appliance when the appliance is switched off and disconnected
from the mains.
There is a risk of electric shock!
There is a risk of electrical short circuit!
Check/Commissioning
• We recommend performing both initial and subsequent regular machine inspec-
tions.
• Never use the appliance if it is incomplete, damaged, or any part of it has been
damaged during use.
• Do not use non-original and incomplete parts of the device and its accessories.
There is a risk of serious injury!
There is a risk of damage to the equipment or other property damage!
• If the equipment has been transported and stored at low temperatures (eg in the
winter) or excessive humidity, first leave it for about 1 - 2 hours
„Acclimatize“ at room temperature to remove any moisture in the electrical / elec-
tronic parts that arises when the ambient temperature changes.
• Do not switch the device on or off by plugging in or pulling out the power cord from
the AC socket.
• Always connect the appliance to the mains power supply when using it normally,
then switch on the main switch.
• When you have finished using the appliance, turn off the main switch and then pull
the cord out of the mains socket.
• Do not use the device if the main power switch does not work.
• The device is under dangerous voltage when the power supply is connected.
There is a risk of electric shock!
Location/Installation
• Only place the device on:
- Straight, firm and stable pads - for tables and furniture parts, suitable for the
location of audio / video equipment.
• Always make sure that the place where you want to place the device has enough
space, mechanical strength and load capacity.
• Do not install the equipment in the rooms (eg enclosed library cabinets, built-in
cabinets and cabinets, etc.) for which there is insufficient room for space and
ventilation.
• Leave enough free space around the device to ensure the required air circulation.
It is recommended to keep min. 10 cm from all sides.
• Do not cover the appliance in part. Do not place any objects and / or decorative
and other fabrics on the appliance, do not put and do not allow foreign bodies to
enter the ventilation holes and holes in the housing covers.
• Do not cover the openings of the airflow covers. Air ventilation ensures reliable and
safe operation of the device.
There is a risk of electric shock!
There is a danger of fire!

7EN
Warning!
• Do not expose the audio device (and the remote control if equipped) to:
- direct sunlight, heat generating equipment,
- vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- an aggressive external environment.
• Do not set the audio device (and the remote control if equipped)
- to places where medical devices are used. Their function may be impaired.
- for unstable carts, stands or tables,
- to an uneven, unstable and dirty surface,
- on the close edge of tables, tables or parts of furniture,
- near containers with water or other liquids.
• Do not place containers of water or other liquids on shelves that are located above
the machine.
• Do not place any objects, especially naked flame objects, equipment, or shelves
that are located above the device.
Warning!
• Place the device in a place where children cannot reach freely.
• Prevent children from handling the device. The device may overwhelm children
and cause serious injury.
• Mechanical damage (eg cracking of the plastic covers) of the device can cause
serious injury.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not place or use the appliance near water-containing containers. If the applian-
ce falls into the water, do not remove it! First, pull the power cord plug out of the
mains socket and then select the appliance from the water. In such cases, take
the device for inspection to a specialist service to check that it is safe and working
properly.
There is a risk of electric shock!
There is a risk of electrical short circuit!
• Do not expose the device and its accessories to strong vibrations and / or shocks.
Prevent anything from dropping or hitting objects.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not use the appliance in potentially explosive environments in the presence
of flammable substances and their vapors, fog or dust, and under atmospheric
conditions, which, when ignited, simply spreads through the air.
• Do not use the device near sources of excessive heat and open flame.
There is a risk of explosion and / or fire!

8EN
Operation/Supervision
Warning!
• To reduce the risk of electric shock, do not remove the device covers. There are
no parts that can be repaired by the user inside the device. Obtain servicing to
qualified service personnel.
Warning!
• Depending on the device model, there may be some options for switching the devi-
ce off and on (or connecting and disconnecting) from the power supply. Therefore,
always follow the following safety precautions carefully:
- where the mains plug or the socket is used as a device to disconnect the power
supply, this device must always be operable and easily accessible.
- where the multi-pole power switch is used as a power-off device, this switch must
always be operable.
• The power plug or the power switch fulfills the safety function of the device.
Warning!
• Do not use the device if the power switch does not work on the device or if the
power plug is damaged.
• Complete disconnection of the device from the network is only ensured after
disconnecting the mains plug from the mains socket.
Warning!
• The pushbutton (or slider) „ON / OFF“ switch on the control panel serves as
„Functional On / Off“ of the device. When the switch is turned to „OFF“, the device
is not disconnected from the power supply.
• The device is under dangerous voltage when the power supply is connected!
• Keep the device under supervision during use and operation.
• Never leave your device freely accessible and do not leave it with a freely accessi-
ble line cord and signal cables. Children, inappropriate persons or animals may be
able to overturn the device by a power cord or signal cable.
• Ensure that all electrical wiring connections are secure and properly connected. If
the power cord is not firmly connected to the device, be careful not to disconnect
it from the device when the plug is plugged into a wall outlet. The free end of the
power cord is under a dangerous voltage. Do not insert any conductive objects
into the end cap.
• Do not connect the power cord and other cables to common bundles. The power
cord must remain accessible for safe disconnection of the device from the power
supply.
• Do not subject the power cord and signal cables to mechanical stress and dam-
age. There is a risk of serious injury!
There is a risk of electric shock!
• The device contains parts of covers (eg ventilation grilles) that can be heated
during normal operation. Do not touch these parts of the device.
• Unplug the power cord from the power socket if you will not be using it for a long
time. Deposition of dust and humidity may cause electrical insulation to be impai-
red.
There is a risk of electric shock!
There is a risk of fire!
• Do not touch the equipment and power cord during strong storms. It could affect
your electrical current from the atmospheric discharge. Disconnect the power cord
from the wall socket during a storm or if you do not use it for a long time.
• Disconnect the appliance from mains supply if children or unaccompanied persons
are left unattended near the device.
There is a risk of serious injury!
There is a risk of electric shock!

9EN
• Do not store the appliance with a wrapped cord around its body. Unfold the cord in
the way it was folded in the original packaging by the manufacturer.
• Never overload the equipment beyond the limits specified by the technical specifi-
cations!
Warning!
• Avoid overheating and overloading when using the unit.
• If you notice any unusual occurrences (sounds, odors, smoke,...), immediately
switch off the device and unplug it from the mains. Have the appliance checked by
a specialist workshop.
• If the device is also equipped with the headphones to reproduce the audio signal:
Do not use earphones set to extreme sound pressure levels.
Risk of serious damage or hearing loss!
• If any safety component / part (mechanical, electrical / electronic) is part of the
device, never disable this part / component! If the safety part / component is dam-
aged or not working, do not use the appliance!
• Never underestimate the potential hazards and take extreme caution !!!

10EN
Power sources/Batteries
Safety instructions for replacing and disposing of the power supply - batteries.
Warning!
• When using electrical / electronic equipment that is equipped with a DC power
supply - battery or accumulator, always observe the important safety instructions
and cautions when operating and handling these sources.
Warning!
• Never recharge batteries!
• Never disassemble batteries!
• Never heat or throw batteries into a fire!
• Failure to observe the safety instructions could result in: Risk of serious injury!
Danger of explosion!
Chemical hazard!
Risk of damage to equipment or other property damage!
Warning!
• The device is equipped with a power source that can be replaced by users - batte-
ries.
• Danger of electric shock, explosion, electrolyte leakage, burns may result from
improper replacement and handling.
• Dispose of batteries according to the applicable regulations and regulations for the
disposal of electronic devices.
Warning!
• Always store batteries out of reach of children, incapacitated persons and pets.
• Store used batteries carefully to prevent children from swallowing them and dispo-
se of them as soon as possible. If swallowed, seek medical advice immediately.
• Use only the same or equivalent type of batteries specified by the manufacturer.
Do not use new batteries with old ones. This may damage the device.
• Wipe the batteries with a dry cloth before inserting them. This ensures better
electrical contact.
• Insert the batteries to match the “+” and “-” symbols on the batteries and on the
inside of the unit cover.
• Do not handle batteries with metal tools (e.g. tweezers, etc.). Conductive contact
of both battery terminals can cause a short circuit.
• It is recommended that you remove the batteries from the device when not in use.
This protects the device from damage from leaking batteries. Should the batteries
leak, have the device cleaned by an authorized service center.

11EN
Power sources
Power supply from the mains
The device is powered from the mains after plugging the power cord into a power
socket with the prescribed voltage of 230 V, 50 Hz. Plug the power cord into an
electrical socket.
Backup power supply from batteries
In order to back up the clock setting, the device must be powered by two 1.5 V
batteries type AAA (not supplied) (backup power supply) and at the same time
connected to the electrical network using a power cord. To power the device from the
mains, connect the mains cord to the mains socket.
Insert the batteries as follows (when powered only by batteries, in case of
disconnection from the mains or a power failure, the display will not be turned on,
but the set time will not be reset, and the settings of the alarm clock and saved radio
presets will also be preserved):
1 Open the back cover of the battery compartment on the back of the device.
2 Insert 2 1.5 V AAA size batteries into the device. Observe the correct polarity + and -
marked inside the compartment.
3 Close the battery compartment cover.
Notes
• Do not put any other objects in the battery compartment.
• If you are not going to use the device for a long time, remove the batteries to prevent
possible leakage of the battery contents and subsequent corrosion.
• Observe the correct + and - polarity. If the batteries are stored with the wrong
polarity, there is a risk of damage to the batteries and the device itself.
Warning!
Only an authorized person in an authorized service center may replace the power
cord. The device is under constant voltage as long as the power cord is in the electrical
socket, even if the device itself is turned off.

12EN
Description of parts
Control elements
The controls are located on the top of the device:
1 Button (FM/AM Band Switch/Switch)
2 Button (Hour Setting (H)/Tuning Down (-))
3 Button (Minute setting (M)/Tuning up (+))
4 Button (Alarm 1/Volume Down (-))
5 Button (Alarm 2/Volume Up (+))
6 Button (Setting mode/confirm setting/save presets)
7 Button (Sleep timer/SNOOZE/display backlight intensity (HI/LOW/OFF))
8 LED display (time display, AL1, AL2, off timer, AM, FM radio, etc.)
9 Battery compartment with cover
10 Loudspeaker
11 Mains cord
12 Wired FM antenna
1 2 3 4 5 6
7
8
9
12
11
10

13EN
General operations
Display
The display shows the time in 24-hour format, setting the time mode, alarm 1 and 2,
sleep timer, radio band and tuning (tuned station).
Time setting
When the radio is off, the display shows the time. The time is displayed in 24-hour
format.
Time setting mode at approx. after pressing and pressing button (6) in radio off
mode for 1 second.
1 Press and hold (6) in clock display mode to activate setting mode.
The display will flash.
2 In the time setting mode, press button (2) to set the clock.
3 In the time setting mode, press the button (3) to set the minutes.
4 Press the button (6) again when the setting is complete.
The setting mode is also canceled automatically if you do not perform the
necessary operation for about 4 seconds. They will save the settings.
Radio control
Basic operations
1 Switch (1) turn on the radio.
The FM band is switched on and the FM indication is displayed.
Press this button (switch) to select FM or AM band.
2 Manual tuning:
A short press of the button (3) tunes up.
For faster tuning, keep the button pressed after starting tuning.
Once the nearest station is tuned in, tuning stops.
To continue tuning, press button (3) again.
A short press of the button (2) tunes down.
For faster tuning, keep the button pressed after starting tuning.
Once the nearest station is tuned in, tuning stops.

14EN
To continue tuning, press button (2) again.
If you want to store the tuned station in the memory, press and hold the
button (6).
A certain prefix number will appear on the display and will flash. The device allows
you to store up to 10 presets in each band.
Use buttons (2)/ (3) to select the desired preset number from
P1 to P10 and then briefly press button (6).
The tuned station is saved under the selected preset number.
3 Briefly press the button to select and switch saved presets (6) and
select the desired prefix number. Presets are sequentially switched from P01
to P10.
4 Press the volume buttons (4)/ (5) to set the desired volume.
Listening to the radio
Extend the FM wire antenna to its maximum length, straighten it and adjust its direction
for the best possible reception. Do not connect any external antenna to the FM wire
antenna cable!
For the best reception in the AM band, try to change the position of the entire device
so that the reception is of the best quality.
Turn off the device
Turn off the radio by pressing and holding the power button (1).
Setting the alarm clock (ALARM)
The device is equipped with 2 alarm clocks. You can wake up to the sound of the radio
or the sound of an alarm.
First, set the time on the clock correctly..
Alarm clock setting 1 - Buzzer alarm
1 In the clock display mode, press the button (4) once to select the
buzzer alarm.
The buzzer icon and alarm time display will flash.
2 Use the button (2) to set the required hours of the alarm time and use
the button (3) to set the required minutes of the alarm time.

15EN
Setting the alarm clock 1 - Wake up by radio
1 In clock display mode, press button (4) twice to select alarm clock
with radio.
The (radio) icon and alarm time display will flash.
2 Use the button (2) to set the required hours of the alarm time and use
the button (3) to set the required minutes of the alarm time.
3 Press the volume buttons (4)/ (5) to set the desired volume.
Alarm clock setting 2 - Buzzer alarm
1 In the clock display mode, press the button (5) once to select the
buzzer alarm.
The buzzer icon and alarm time display will flash.
2 Use the button (2) to set the required hours of the alarm time and use
the button (3) to set the required minutes of the alarm time.
Alarm clock setting 2 - Wake up by radio
1 In clock display mode, press button (5) twice to select alarm clock
with radio.
The (radio) icon and alarm time display will flash.
2 Use the button (2) to set the required hours of the alarm time and use
the button (3) to set the required minutes of the alarm time.
3 Press the volume buttons (4)/ (5) to set the desired volume.
Turning off the alarm
To turn off the alarm until the next day, press the power button (1). The alarm goes
off and sounds again the next day at the set time. If you do not turn off the alarm, it will
sound for about 30 minutes, then it will turn itself off and sound again the next day at the
set time.
Activation/deactivation of the alarm clock function
In the time display mode, press button (4) or (5) repeatedly until the
dot next to the alarm time goes out on the display.
Warning
The alarm clock can only be set when the clock is set correctly.

16EN
Snooze function
After setting the alarm, if the set wake-up time occurs and the radio sound or
alarm sound starts playing, press the snooze button (7) to temporarily
turn off the radio or alarm sound.
The alarm icon (AL) on the display will flash. If you do not perform any operation,
after approx. after 9 minutes, the radio or alarm sound is activated again. This will be
repeated 10 times.
To turn off the snooze mode, turn off the alarm clock by briefly pressing the power
button (1).
Timed shutdown function (SLEEP)
The device allows you to fall asleep while playing the radio sound.
1 Press the power switch (1) to turn on the radio.
2 Select or tune to the desired station.
3 Press the volume buttons to set the desired volume (4)/ (5)
set.
4 Press the switch-off timer button (7).
The display will show 90 (minutes), which is the default period after which the radio
will turn off. The sound will play for 90 minutes. The time will gradually count down
and when 00 is displayed, the device will turn off.
5 If you want to adjust the time until switching off, (7) press this
button to decrease the desired time until switching off after 10 minutes (90,
80, 70, 60 ......10, OFF).
When set to OFF, the shutdown timer is disabled.
6 If you want to turn off the radio before the set turn-off time, simply press and
hold (1) to turn it off.

17EN
Setting the intensity of the display backlight
(DIMMER)
In the time display mode (the radio is off), press the button (7) to set the
intensity of the display backlight (higher - lower).
From the factory, the intensity of the display is set to normal brightness.
Maintenance
Cleaning the surface of the device
Use a soft cloth slightly moistened with water to clean the surface of the device, panel
and controls.
Do not use rough cloths, cleaning powders, or solvents such as thinner, petrol, or alcohol.
They can damage the finish.
Technical specifications
Tuning range: FM: 87.5 - 108 MHz
AM: 522 - 1620 KHZ
Antennas: wire FM antenna
Display: Clock display (24-hour cycle), FM frequency and
others
Power consumption: 5 W
Audio output power: 1 x 0.5 W (mono)
Power supply: 220 - 240 V~ 50 Hz
Backup power supply DC: 2x 1.5V AAA battery (not supplied)
Protection class: II
Dimensions (WxHxD): 15.2 x 7.5 x 4.8 cm
Weight: 0.34 kg (without batteries)
The right to make changes reserved!

18EN
DECLARATION OF CONFORMITY
Short text Declaration of Conformity:
ORAVA retail 1, a.s. hereby declares that the RBD-613 complies with the essential requirements and other relevant
conditions of Directive 2014/53/ EU of the European Parliament and of the Council.
The full text of the Declaration of Conformity is available at: www.orava.eu
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Dispose of used packaging material at a municipal waste disposal site.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on the products or in the accompanying documents means that used
electrical and electronic products should not be mixed with general household waste.
For proper disposal, recovery and recycling, please return these products to designated
collection points. Alternatively, in some countries of the European Union or other European
countries, you may return your products to your local retailer when purchasing an
equivalent new product. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment natural resources and help
prevent potential negative effects on environment and human health, which could be the
consequences of improper disposal waste. Contact your local authority or nearest office for
more details collection point. Improper disposal of this type of waste may result in penalties
in accordance with national regulations.
For business entities in the countries of the European Union
If you wish to discard electrical and electronic equipment, please request the necessary information from
your seller or supplier.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to discard this product, please request
obtain the necessary information on the correct method of disposal from the local authorities or from the
your supplier.
Producer:
Importer:
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
ORAVA distribution CZ, s.r.o.
Ostravská 494
739 25 Sviadnov
Česká republika
ORAVA retail 1, a.s.
Seberíniho 2
821 03 Bratislava
Slovenská republika
This product complies with all the essential requirements of the EU directives that apply to it.