Orava VP-21i User manual

1EN
Induction cooker
VP-21i
Instruction manual EN
VP-21i

2EN
Intended use of the device
The device is intended solely for the cooking of food - by cooking/
heating, in containers for cooking/heating by eddy currents, to the
extent determined by the technical and operating parameters and
functions, safety and user instructions and external influences of the
operating environment.
ORAVA electrical appliances are manufactured according to state-of-
the-art knowledge and recognized safety regulations. Nevertheless,
improper or improper use or improper use may result in injury or
endangerment to the life of the user or a third party, or to a third party.
damage to equipment and other property.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for
safe, correct and economical operation of the electrical equipment. Its
compliance helps the user avoid risks, increase reliability and product
life.
• In this document, the generic term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept
of electrical equipment in the strict sense of the word will include the
following categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational
1.1 General safety instructions
• Before commissioning the unit, we recommend that you carefully read
the operating instructions and operate the equipment in accordance
with the instructions!
• The safety instructions and warnings in this manual do not cover all
the possible conditions and situations that may arise when using
the device. The user must understand that a factor that can not be
incorporated into any of the products is responsibility and caution.
These factors must therefore be ensured by users / users who use and
operate this device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!

3EN
• Make sure that the appliance is complete and shows no signs of
damage before using the appliance for the first time. If the product is
defective or if it has any visible damage, do not use the product.
• Keep the operating instructions as close to the device as possible
throughout its service life. Always keep the operating instructions
together with the appliance for future use and use by new users.
• Use the appliance only for the purpose for which it is intended and in
the manner specified by the manufacturer.
• The appliance is intended for home and similar indoor use, with no
special focus.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside
environment.
• Always keep the operating environment clean and well lit.
• Do not place the device on an unstable surface. Overriding or dropping
the device may result in personal injury or damage to the device.
• Do not expose the unit to direct sunlight or excessive heat sources.
• Do not use an electric appliance in areas with flammable liquids, gases
or dust. The appliance may be the source of scaling, which can result in
the ignition of dust or vapors.
Features of the operating environment
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or
occurrence of water vapor
5. Occurrence of foreign bodies: amount and type of dust are not
significant
Protection class: IP20
• Other characteristics of the operating environment (mechanical stress
- shocks and vibrations, occurrence of plant, animals, weather effects)
are negligible in terms of effect on the correct and safe use of electrical
equipment.

4EN
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time,
make sure that the voltage on the appliance label corresponds to that of
the household electrical outlet.
• The electrical appliance is designed for mains supply 230 V ~.
The electrical safety of the appliance is guaranteed only if it is properly
connected to the electricity grid.
• Only use a power cord with a plug (mains lead) that came with the
device and compatible with a wall outlet. Using another cable may
result in fire or electric shock.
• Always connect an electrical appliance to an easily accessible power
outlet. In the event of an operating fault, the appliance must be switched
off as soon as possible and disconnected from mains supply.
• Do not pull the power cord / power cord by pulling on the cord / cord.
Disconnect the power cord by pulling the plug behind the power cord /
power cord plug.
• If you use an extension cord, check that the total rated (ampere) power
of all devices connected to the extension cord does not exceed the
maximum current rating of the extension cable.
• If you need to use an extension cord or power supply block, make sure
that the extension cord or power pack is plugged into a power outlet,
and not to another extension cord or power supply. Extension power
cord or power supply block must be designed for grounded plugs and
plugged into a grounded outlet.
• The power plug of the appliance must be compatible with the mains
socket. Never use any adapters or modify the socket in any other way.
Do not use inappropriate or damaged soclets.
• To avoid electrical shock, plug the power cables into properly grounded
electrical outlets. If the device is equipped with a 3-pin power supply
cord, do not use adapters that do not have a grounding element or
remove the grounding element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord / power cord of
the appliance to mechanical stress or external heat sources. Damage
to the power cord may result in electric shock.
• If the power cord is damaged, disconnect the appliance from the mains
and do not use it again. If the power cord / power cord is damaged,
it must be replaced by the manufacturer, its service department, or a
qualified person to avoid the risk of electric shock.
• Regularly check and maintain the electrical appliance as well as
the power cable. Disconnect the power plug regularly and clean it if
necessary. Pollution by dust or other substances may cause disruption
of the insulating state and consequently fire.

5EN
• Do not expose the appliance to water or moisture. The ingress of water
into the appliance increases the risk of electric shock. If the power cord
is wet or the appliance gets water, disconnect it immediately from the
mains. If the appliance is plugged into a mains socket and if possible,
turn off the power supply before attempting to disconnect the power
supply. If you are pulling wet wires from a live power source, be very
careful.
• If the electrical equipment is installed (connecting) the protective covers
are dismantled, the electrical parts must not be accessible to the user
when the installation is finished.
1.4 Safety of persons
• This appliance is intended for use by persons without an
electrotechnical qualification (layperson) according to the instructions
specified by the manufacturer.
• Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory
inspection of the equipment, and user cleaning and maintenance.
• This appliance can be used by children 8 years of age and older and
persons with reduced physical, sensory or mental abilities or lack
of experience and knowledge only when under the supervision or
guidance of the responsible person have been instructed to use the
appliance in a safe way and understand the potential hazards .
• Cleaning and user maintenance can be carried out by children 8 years
of age and older only under the supervision of the responsible person.
• Children may not play with the appliance.
• Always keep the appliance out of reach of children during use and
operation. Be sure to download the appliance even for a freely
accessible power cord.
• Always be careful when operating the electric appliance. Do not use
an electric appliance if you are overly tired, under the influence of
medication or narcotic drugs that reduce attention and focus. Inattention
during operation may result in serious injury.

6EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance
in the recommended way. Do not use solvents or harsh cleaners for
cleaning. Pollution and visible stains from finger contact, respectively.
The hands can be cleaned using detergent detergents specially
designed to clean household appliances.
• If you do not use the appliance, clean it or disconnect the appliance
from the power supply when the appliance is faulty.
• Do not disassemble the appliance. The appliance works with a
dangerous voltage. For this reason, always switch off the appliance and
disconnect it from the power supply. In the event of a fault, please have
the repair serviced by an authorized service center.
• Only guarantee qualified and qualified personnel to repair and repair
the electrical appliance.
(
*) Appropriate qualified professional: the sales department of the manufacturer or importer or the
person qualified and authorized to carry out this type of activity with the ability to avoid all risks.
2. Special Safety Instructions. Read carefully!
• Electrical equipment is designed and manufactured in such a way as
to allow for safe operation and use by persons without a professional
qualification. Despite all the measures that have been
to the manufacturer for safe use, handling and use carries with it certain
residual risks and the associated potential hazards.
• To warn of possible hazards, the following symbols and their meanings
have been used on the device and in the accompanying documentation:
This symbol alerts users that the device is operating a
dangerous electrical voltage. Do not remove protective covers
on the device. Failure to observe the safety instructions during
use and operation of the device may result in:
Danger of electric shock!
Danger of serious injury or life threatening!
This symbol alerts users to the following: Risk of serious injury
or life threatening when not following the safety instructions
when using and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol alerts users that if not following safety instructions
while using and operating the device:
Danger of burning from hot surfaces!
This symbol means that the product is made with a double
insulation between hazardous live parts (parts with dangerous
voltage from the mains) and parts that are accessible in
normal use.

7EN
Transport/Carriage
• When transporting and using, for example the transport cart, be careful
when moving, to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the
space and the routes, which must be unobstructed.
• Never carry the machine while it is in operation. Do not carry the device
while it is plugged into a wall outlet.
Warning!
• Some surfaces may be hot during operation. Do not touch hot surfaces!
• Never transfer the appliance until it has cooled down to ambient
temperature.
• Transfer the device firmly by both hands to the bottom edge of the base
or fixed parts of the body.
• Make sure that your hands and equipment are not damp or slippery
when carrying.
There is a risk of serious injury or life threatening! There is a risk of
damage to the device!
Unpacking/Packaging
• Unpack and remove all parts and accessories of packaging materials,
labels, and labels before putting the device into operation. Keep all
packaging materials in a safe place or keep them out of the reach of
children and inappropriate persons. There is a risk of serious injury!
There is a risk of choking!
Check/Commisioning
• Clean the machine before commissioning as described in the „
Commisioning „ or „Cleaning“ section.
• Never clean the appliance (body with electrical parts and control panel)
and the power cord with the plug - under running water, which could
cause the liquid to flow into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it
dry.
• Only clean the appliance if it is switched off and disconnected from the
mains.
• We recommend performing both initial and subsequent regular machine
inspections. Do not attempt to interfere with the construction or
adjustment of the component parts in any way.
• Never use the appliance if it is incomplete, damaged, or any part of
it has been damaged during use. Have the appliance repaired by a
specialist workshop.
There is a risk of serious injury!

8EN
Location/Installation
• Only place the appliance on straight, strong and stable pads - kitchen
work desks and furniture parts, suitable for the location of kitchen
utensils.
• Always make sure that the location you want to place the device has
sufficient space, stability, mechanical strength and appropriate lighting.
• If you do not use the appliance, do not place objects or liquid containers
on the cooker.
Warning!
• Do not install or use the machine on metal (ferromagnetic) washers.
• Do not place the appliance:
- unstable tables or inappropriate parts of furniture,
- on an uneven and dirty surface,
- on the sealing edge of tables or parts of furniture,
- in the vicinity of containers with water or other liquids.
Warning!
• Place the device in a place where children can not reach freely. Work
desks and furniture for placing should not be less than 85 cm.
• Prevent children from handling the device. The device may overwrite
and cause serious injury. Mechanical damage (breakage or breakage of
parts and covers) of the device can cause serious injury.
• Do not place the appliance and do not use the proximity of containers
containing water. If the appliance falls into the water, do not remove
it! First, pull the power cord plug out of the mains socket and then
select the appliance from the water. In such cases, take the device for
inspection to a specialist service to check that it is safe and working
properly.
There is a risk of electric shock! There is a risk of electrical short circuit!
• Do not expose the device to:
- direct sunlight, sources and equipment producing heat,
- vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- aggressive effects of the external environment.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not cover the device in any way. Do not insert or allow the foreign
bodies to enter the holes of the device covers. Do not cover the cover
openings for air flow. Air ventilation ensures reliable and safe operation
of the device.
• From a fire protection and safety point of view, the device can also be
placed on a work table or similar surface if a safe distance from the
flammable surfaces is maintained. materials:
- at least 500 mm in the direction of the main heat sink, and
- at least 100 mm in other directions.
There is a risk of electric shock! There is a danger of fire!

9EN
Operation/Supervision
Warning!
• The induction cooker (panel surface) is made of a technical material
(eg glass-ceramic), which is susceptible to damage under certain
circumstances.
• Be careful about this, and do not expose the device to excessive
mechanical stress (mechanical shock and pressure of sharp objects)
acting on the surface of the hob.
Warning!
• If the surface of the hob is cracked or otherwise mechanically damaged,
turn off the device to avoid possible electric shock. Do not use the
damaged device anymore.
CAUTION!
• Do not place any metallic (ferromagnetic) objects on the surface of the
cooker, knives, forks, spoon or cover plates, etc., as they may become
hot and cause burns.
CAUTION!
• Use only such hob guards that have been designed by the
manufacturer of the cooking appliance or the manufacturer of the
appliance as instructed to indicate that they are suitable for use or the
hoods of the hobs built into the appliance.
• Using unsuitable protective covers may cause accidents.
CAUTION!
• For cooking / heating only dishes intended for heating / cooking by
means of whirlpools - vessels with ferromagnetic bottom.
• Do not switch on or use the appliance with an empty kettle on the hob.
Warning!
• Do not heat any metal cans on the hotplate.
• Position the cooking container as accurately as possible into the central
axis of the cooking zone of the cooking zone.
• Ensure that the cooker is in the cooking zone during the entire cooking
time (during cooking). The evacuation of the cooking vessel from the
cooking zone results in a reduction of the cooking power and thus the
extension of the cooking time.
• Do not place other devices and products sensitive to the
electromagnetic field in the vicinity of the device. They may affect their
function or damage them.
• Always keep your device under control during use and operation!
• This device is not intended to be operated via a programmer, external
time switch or remote control because there is a risk of fire if the device
is covered or incorrectly positioned.
• Do not leave the appliance unattended during operation, especially if
there are children, inappropriate persons or animals nearby.
• Do not use the appliance near easily flammable materials and objects,
curtains, curtains, decorative fabrics.

10EN
Warning!
• Do not use the appliance for space heating, drying textiles, clothing,
footwear or any other items!
There is a danger of fire!
• Do not immerse the appliance or any part of it in water or other liquid.
There is a risk of electric shock!
There is a risk of damage to equipment or other property damage!
• Make sure that the controller is set to „OFF“ in the „0“ position before
each connection to the power supply.
• Do not switch the device on or off by plugging in or pulling out the plug
of the power cord from the wall socket.
• Always connect the appliance to mains power supply for normal use,
then switch on the main power switch - the power controller.
• When you have finished using the appliance, turn off the main power
switch - the power controller, and then pull the plug of the power cord
out of the mains socket.
• If the main power switch does not work - the power controller, do not
use the device.
• The device is under dangerous voltage when the power supply is
connected.
There is a risk of electric shock! There is a danger of fire!
CAUTION!
• The cooking zones become hot during use.
• Do not touch hot surfaces, especially when operating and immediately
after use. The residual heat transferred from the heated bottom of the
cooking vessel acts on the cooking zone of the panel.
• Be very careful when cooking. Cooking utensils and cooked / heated
dishes are also very hot / hot. Use kitchen towels or cloths when
handling the appliance and cooking utensils.
• Open closed containers at the time of cooking slowly and carefully.
Sudden leakage of hot air or boiling fluid may occur when a sudden
opening occurs.
Attention!
• After switching off the appliance, the hotplate surfaces remain warm
for some time. Before any further handling of the storage and storage
device, always wait for the hot surfaces to cool completely.
• Do not disconnect the appliance from the electrical outlet immediately
after use. To ensure efficient cooling, it is necessary that the fan power
supply is connected for at least a few minutes.
There is a risk of burning from the hot surface!
There is a risk of burning / burning from hot air/hot food!