Orbiz OD series User manual

Quick Guide

Quick Guide----------------------------------------1
B) Fix these brackets and HDD in main DVR case
rightly.
A) Add and fasten HDD to bracket by screws like
the picture.
I. installation
HDD Installation
C) Connect SATA power cable and data cable with
DVR board in right position.
D) Put the Case Cover.
※ When adding ODD, please do the same as HDD installation with ODD bracket.

II. Overview on part name and functions
Front: parts name and functions
①ODD Cover : Used to open and add the ODD.
②Direction / Enter Button: Used to move direction and select
menu
③LED/IR Sensor : LED shows functions right working, and IR
sensor.
④Function Button : Used to make each function directly .
⑤USB Port : USB Port to backup and upgrade.
⑥Numbers Button : Used to select CH or enter Numbers.
⑦Playback Button : Used to playback Data
(When clicking in Live Mode, goes to Search Mode.)
⑧MENU Button : Used to show Menu .
⑨HOME Button : Used to show <Home> Menu in task bar.
⑩ESC Button : Used to Cancel previous work.
①Power Switch: Used to Turn Power On/Off.
②VGA Port : VGA connection port.
③SPOT Port : SPOT Monitor connection Port.
④SD Video-In : Composite(Analog) Video Signal Input Port
(BNC type connector).
⑤HD-SDI Video-In : HD-SDI Video Signal Input Port .
⑥AUDIO In/Out : Audio Input/Output signal port .
⑦HDMI : HDMI connector port.
⑧RS-232 Port : Used to Debug SW.
⑨USB Port : Used to connect Mouse or USB storage.
⑩LAN : NETWORK(LAN) connector port.
11 I/O : Used to connect Sensor/Alarm/RS-485(PTZ).
12 Power : Used to connect Adaptor.
Remote Controller Button & Function
①Power : Used to Power On/Off System.
②ID Button : Sets the ID of the system.(While pushing
ID+Enter buttons in 3 seconds, enter 2 Numbers during
LED blinking)
③Number : Used as the numeric input keys, or displays a
single channel. For Number over 10, please enter
(0/+10)+(0~6)=10~16.
④HOME : Used to show HOME menu in task bar.
⑤MUTE : Used to Audio On/Off.
⑥ESC : Used to cancel previous work.
⑦MENU : Used to show MENU.
⑧Direction / Enter Button : Moves the cursor
up/down/left/right, and runs the Select Menu
(When clicking in Live Mode, goes to Search Mode.)
⑨Function : Used to make each function directly .
Quick Guide----------------------------------------2
Rear: parts name and functions

III. Product Features
Live Mode Context Menu(By clicking the right button of mouse)
HOME ( By clicking HOME menu)
Search Mode
•Screen : Used to manage Screen Division(Layout).
•Control : Used to manage PTZ, other functions.
•Status: Used to manage Event, Record, and other
System features.
•Panic Record : Used for Emergency Record.
•Always Show Task Bar: Used to show or hide Task Bar.
•Setup Information Display: Used to manage OSD
in LIVE and other
•System Shutdown: Used to Power On/Off of System.
•Login : Used to Log-In.
•System Info: Show System Information & Version.
•Tools : Used to manage System features.
•Backup : Used to backup by USB or ODD.
•Setup : Used to mange System Setup or Advanced Setup.
•Search : Used to search and playback Data.
•Playback : Used to show and playback latest Record Data
Calendar Search
•HOME>Search>Time Table Search
•Green in Time Bar: Shows ‘there are Record Data‘.
•Orange in Time Bar: Show ‘there are duplicated Data’.
•When selecting Hour/Minute and clicking Play button, which shows the Data.
•HOME>Search>Event Search
•Green in Time Bar: Shows ‘there are Record Data‘.
•While checking Events Type, and clicking Play button, which shows the Data.
Quick Guide----------------------------------------3

IV. Other Features
Firmware Upgrade
[Home>Tools>Upgrade or Advanced Setup>System>Upgrade]
•After file copy or download through Network, and restart the system, and this make upgrade done.
•After Upgrade done, System restarts again, so Total 2 System Reboots. Please note.
•When choosing Network upgrade, System automatically checking latest version in our Server and
upgrade firmware. But users want to upgrade firmware upgrade manually, please download latest
firmware in USB and upgrade it.
USB
Upgrade firmware through USB device.
Network
Automatically checking latest version in our Server
and upgrade firmware.
•Recommend to use Network, however, when Network is slow or unstable, please use USB.
Resolution
•Default Resolution setting in System is 1024*768 to support all low-end monitors.
•When using HD-SDI , please use Recommend Monitors above.
•Recommend Resolution : 1920*1080p(50Hz PAL/60Hz NTSC)
•If monitors can’t support resolution and need System Recovery, please use System Recovery Mode.
•Go to Recovery Mode: While pushing Reset Button in Rear, and Power On. After that, System Recovery
Mode starts with Buzzer.
Recommend Monitor Resolution
1024*768p(60Hz) 1920*1080p(25Hz)
1280*720p(50Hz) 1920*1080p(30Hz)
1280*720p(60Hz) 1920*1080i(50Hz)
1280*1024p(60Hz) 1920*1080i(60Hz)
1360*768p(60Hz) 1920*1080p(50Hz)
1440*900p(60Hz) 1920*1080p(60Hz)
1600*1200p(60Hz) 1920*1200p(60Hz)
1920*1080p(24Hz)
Quick Guide----------------------------------------4