Orcam MyCharger User manual

User Guide
For OrCam MyEye

2
When connecting to a power source, the
OrCam MyCharger LED indicator will blink
four times indicating its current level of
charge.
When the OrCam MyCharger is fully
charged, the LED indicator will constantly
illuminate with all four LEDs.
Your OrCam MyCharger connects to a
wall charger using the Wall to MyCharger
Cable (USB to Type-C). The smaller
connecter (Type-C) goes into the
connector port under the flap on the
narrow end of the OrCam MyCharger
beside the LED indicators. Use the
OrCam wall adapter you received with
your OrCam MyEye device.
Get Started
Charging your
OrCam MyCharger
LED

OrCam MyCharger is a wearable
high-speed charger for OrCam MyEye.
OrCam MyCharger has a built-in belt clip
for easy wearability.
The only button on OrCam MyCharger
is a status button. Pressing the Status
Button displays the current charge status
of OrCam MyCharger. When pressed the
LEDs blink four times (either 1, 2, 3 or 4
LEDs will illuminate).
3
Status
button
Wall
adapter input
LED Clips-in
easily
The connector port (under the flap on
the narrow end of the OrCam MyCharger
beside the LED indicators) is used to
charge OrCam MyCharger from a wall
adapter and also to power the OrCam
MyEye from OrCam MyCharger
for continuous use (in suspend or
powered-on state).
Introduction to OrCam MyCharger

Inserting OrCam MyEye into the
OrCam MyCharger
To remove the OrCam MyEye from
the OrCam MyCharger, grasp the
OrCam MyEye from both sides of
the OrCam MyEye logo and pull.
Place the end of the OrCam MyEye
with the charging connector into the
corresponding magnetic connector,
which is located above the status
button.
1
Press the OrCam MyEye firmly into
place, ensuring that the end of
OrCam MyEye where the camera is
located is flush with the top of the
OrCam MyCharger.
2
When OrCam MyEye is inserted
correctly, the OrCam MyCharger LED
indicator will blink four times
indicating its current level of charge.
3
4

Note: To use OrCam MyCharger you must
have the magnetic charging connector
inserted into the charging port of the
OrCam MyEye.
This User Guide says “OrCam MyEye” a
lot, but if you have an OrCam MyReader
you need not worry – everything works in
exactly the same way. OrCam MyCharger
is compatible with OrCam MyEye 2 and
OrCam MyReader 2.
5
Initial charge - The first time you charge
OrCam MyCharger, charge for 3 full hours
continuously to ensure the OrCam
MyCharger is fully charged. Standard
charging time after the first use is
approximately 2 hours to fully charge the
OrCam MyCharger.

Get Prepared
3.
OrCam MyCharger to OrCam
MyEye Cable
(Type-C to magnet-micro-USB)
What’s in the box?
Note: You now have three different charging
cables – one that came with OrCam MyEye
and two that came with OrCam MyCharger.
Take care not to confuse them, as each cable
has a specific purpose. OrCam recommends
always charging your OrCam MyEye using
your OrCam MyCharger.
1.
OrCam MyCharger
Wearable Battery Pack
2.
Wall to OrCam MyCharger Cable
(USB to Type-C)
Type-CMagnet USB
6

Get Comfortable
Charging OrCam MyEye
Simply insert the OrCam MyEye into
the OrCam MyCharger. Charging will
begin automatically.
Note: For daily charging while OrCam
MyEye is not in use (overnight), OrCam
recommends placing OrCam MyEye in
the OrCam MyCharger and plugging
OrCam MyChargere into a wall adapter.
7

Connect the OrCam MyEye to the OrCam
MyCharger using the OrCam MyCharger to
OrCam MyEye Cable (Type-C to magnet).
OrCam MyCharger will continuously
provide power on-the-go, even while your
OrCam MyEye is in use. Using this method
you can enjoy continuous use for many
hours (approximately 10 hours of use
without suspend).
Powering OrCam MyEye on the go
8

Safety
1
Do not expose the OrCam MyCharger to
excess humidity or water.
2
Use only OrCam-supplied cables and
wall adapter for charging.
© 2018 OrCam Technologies Ltd
All rights reserved.
OrCam® is the trademark and brand name of
OrCam Technologies Ltd. (“OrCam”) and OrCam is
the sole proprietor of all the rights and all the
intellectual property rights in this guide and/or any
other document produced by OrCam relating
thereto. The documents are protected by
applicable intellectual property laws including and
without limitation copyrights, patents, trademarks,
know how, trade secrets, and international treaties.
No license or rights are hereby transferred to the
user of this guide and said guide shall remain the
sole and exclusive property of OrCam.
No part of this guide shall be used, reproduced,
translated, converted, modified, adapted, displayed,
stored in a retrieval system, communicated, or
transmitted by any means, for any commercial
purpose, including and without limitation, sale,
resale, distribution, reproduction, license, rental, or
lease without receiving written permission from
OrCam.
OrCam makes no expressed or implied
representation or warranty as to the accuracy or
completeness of the contents of this guide, which
is provided “as is”, and assumes no responsibility
or liability for any errors or inaccuracies that may
appear in this document or for any product that
may be provided in association with this
document.
OrCam devices are intended to enhance the
9

@
This user guide is also available for
online viewing and download in PDF
and audio formats at:
www.orcam.com/userguide
day-to-day lives of individuals with visual
impairments. They are not substitutes for existing
methods or forms of assistance and should not be
relied upon in circumstances which are potentially
life- or health-threatening or which could lead to
financial loss. OrCam devices should especially
never be relied upon to drive vehicles or operate
heavy machinery of any kind.
Corporate Headquarters
OrCam Technologies
5 Kiryat HaMada St.
Jerusalem 9777513
Israel
+972.2.591.7800
United States and Canada
OrCam Inc.
1115 Broadway, 11th floor
New York, NY 10010
1.800.713.3741
United Kingdom
OrCam UK
60 Gresham Street
London EC2V 7BB
0800.358.5323
www.orcam.com | [email protected]
Print Date: ChargeMe, Oct 2018, DOC000028
10