05
Read Me First.
Thank you for purchasing the OrCam Read assistive technology device!
You have chosen a highly advanced, effective – and easy-to-use – wearable solution that helps you access your
world and gain increased independence.
Before beginning your journey toward increased independence, please read this manual in full before using the
device to ensure safe and proper use. Follow along the instructions provided in this manual with your OrCam Read
to best get acquainted with your device and to test to ensure that all features of your OrCam Read function properly.
Safety and Warnings.
Before using the OrCam device, read these precautions carefully to avoid dangerous situations and to ensure ideal
performance of your device.
• Handle your OrCam device with care. It can be damaged if dropped, burned, punctured, or crushed. Do not open
the outer casing of the device.
• Check that there is no physical damage to your OrCam device such as any cracks or dents in the outer casing of
the device. Do not open the outer casing of the device.
• Check that the camera lens of your OrCam device is not cracked, damaged, or scratched.
• Conrm that the camera lens is not covered or dirty. Read the cleaning instructions below on how to properly
clean your OrCam device.
• There are three magnetic mounts provided in the box. Should one of them be broken, do not use it; use a different
one.
• Use only the charger supplied with your OrCam device. Using another charger may void your warranty and could
cause severe injury to you or damage to the OrCam device.
• Check that the wall charger and charging cable are not damaged or broken.
• Do not attempt to replace the battery; you may damage it, which could cause overheating and even injury. The
battery is designed to last for two years of average use (one charging cycle per day on average) after which it may
need to be replaced.
• The OrCam device is designed to work in ambient temperatures between 32⁰F and 104⁰F (0⁰C and 40⁰C) and
in normal conditions (Relative Humidity of 10% to 90% RH and Atmospheric Pressure of up to 2000m above
sea level (700hPa)). The device can be damaged if used outside of this range. Store and transport in a cool, dry
place (32⁰F to 104⁰F (0⁰C to 40⁰C) and Relative Humidity of 5% to 90% and atmospheric pressure of 700hPa to
1060hPa)). If the OrCam device overheats, the OrCam device will perform its powering-off procedure.
• The OrCam device is water-resistant but not waterproof. This means the device can withstand light rain or drizzle
for short periods of time, although it is not recommended. Do not use the OrCam device in heavy rain, at the
beach, near a swimming pool, or in or near a bathtub or shower. Do not submerge the OrCam device in any liquid.
The OrCam device meets the standards of IP Code: IP22.
• Do not force a connector into a port or apply excessive pressure to a button. This may cause damage that is not
covered under the warranty. If a connector does not insert easily, check for obstructions in the port and verify that
you have the correct connector for that port. Do not combine with software, hardware, or other equipment not
supplied by OrCam. Exposing the device to magnetic elds may damage the unit or erase your data.
• When using the OrCam device or charging the battery, it is normal for the device to get warm. If the unit becomes
excessively hot, leaks, or gives off a burning smell, turn the device off immediately and contact OrCam Support.
• If you experience any issues operating the OrCam device, or if the device or any of its components, such as the
camera lens or outer casing or charger, becomes damaged or stops working, please contact OrCam Support
and do not attempt to repair it by yourself. Only qualied OrCam personnel may repair or service your device.
Unauthorized repairs may void your warranty.
• OrCam recommends that the user should stay away from background noise so as to better hear the OrCam
device. OrCam recommends that the user use a Bluetooth audio device such as earphones to better hear the
OrCam device in loud environments.
• If you have specic questions about use alongside an internal pacemaker and/or debrillator and/or cochlear
implant, please, please consult your medical professional.
• If you experience an allergic reaction to any of the elements of the OrCam device, contact a medical professional
immediately.
• Do not use your OrCam device to read medication labeling.
• OrCam Read meets the standard requirements in the US and EU for Class 1 medical devices.
