Oregon Scientific ThermoDECT User manual

Use this quick reference as you set up and first begin to use your ThermoDECT telephone.For more detailed
instructions and troubleshooting tips, refer to the User Manual.
Clear/Phonebook/Mute
View the previous menu
Clear the last entered digit
Mute or un-mute the
microphone
View the phonebook
Down/Caller ID
Scroll through the
Caller ID menu
Decrease volume level
Review caller ID
information
Phone
Press to begin and end
a call
Up/Redial
Scroll through the
Caller ID menu
Increase volume level
Recall the last number
dialed
OK
Select or confirm a
menu option
Intercom
Make and terminate an
intercom (handset to
handset) call
Keypad
Dial the number for a call
Enter text for a phonebook
entry
Speakerphone
Turn the speakerphone on
or off
Caller ID / Phonebook tasks
Action Procedure Page
View caller ID information 8
Delete caller ID information Caller ID + +Delete + 9
Add caller to phonebook x 3 + name + + number + 9
Recall phonebook entry + to select entry + + 10
Delete / Edit phonebook entry x 2 + Delete or Edit + + entry + x 2 10
Action Procedure Page
Make a call + dial number 7
Answer / End a call 8
Redial + 7
Cancel / Clear 7
Return a missed call to view New Calls + 8
Call waiting + 20
Page handset(s) Press PAGE on the base 8
Set clock + Setup + x 3 + 22
date/month + + hour/minute +
Basic tasks Action Procedure Page
Adjust volume 11
Mute / Unmute 8
Speakerphone 7
Intercom call + handset number 19
3-way call + handset number + x 20
2 seconds
Transfer call + handset number + 20
OR to cancel
Deactivate alarm Press PAGE on the base 22
Set alarm + Setup + + 22
Alarms + + to select
Alarm 1 or Alarm 2 + +
on + + hour/minute +
to select AM or PM +
ThermoDECT Quick Reference Guide
To set up the telephone:
1. Connect the base to the AC
power source and telephone wall
jack, as shown below.
2. (Optional) Attach the belt clip to
the handset.
3. Install the handset batteries,
matching (+) polarity to (+) and (-)
polarity to (-).
4. Allow the handset batteries to
charge before using.
Caller ID / Phonebook tasks
ENG

ThermoDECT Quick Reference Guide
Action Procedure Page
Lock / Unlockkeypad + Keypad lock + + to select on or off + 23
Baby call (emergency dial) setup + Babycall + + Number + enter number + 23
Baby call on / off + Babycall + + to select on or off + 23
Baby monitor on /off On the handset that you want to act as a listening device: + Monitor Mode + +24
to select on or off
Baby monitor On the handset that you want to act as the receiving device: + enter handset number 24
for monitor
Snake game + Games + + Snake + to select the level + 24
Car game + Games + + Car + to select the level + 24
Child setup tasks
Multiple handset setup tasks
Action Procedure Page
Register handset Press and hold PAGE on the base + + Registration + + to select an 16
unchecked number + + PIN + x 2
Remove handset + Setup + + Remove HS + + PIN + + to highlight the 17
handset number +
Clearing all registrations Handset: remove batteries + hold + insert batteries + release + 518
Base: disconnect + hold PAGE + reconnect + release PAGE
Name handset + Handset Menu + + Handset Name + + name + 18
Set default base + Setup + + Base + + + 18
Set ring priority + Setup + + Ring Priority + + to select option + + to 19
select handset + + to select rings +
Multiple handset setup tasks
Action Procedure Page
Display language + Handset Menu + + Language + + to select the preferred 13
language +
Change ring tone + Handset Menu + + Ext Melody + + to select the melody + 11
Change security PIN + Setup + + PIN code + + PIN code + 14
Reset system (with PIN) + Setup + + Default + + PIN code + 14
Reset system (without PIN) Remove batteries + hold + insert batteries + 15
Temperature display Insert an unfolded paperclip into the hole located on the underside of the base unit, 21
and press.
Date display + Setup + x 2 + Date Format + + to select DD/MM or MM/DD + 21
Time display + Setup + x 2 + Hour Format + + to select 12 or 24 hour display + 21
Setup tasks
© Oregon Scientific. All rights reserved.
ENG