
3
2
Part A-LCD Part B-Buon
A1: Day of the Week
A2: Radio Control Icon
A3: Time
A4: Month
A5: Date
A6: Year
B1: “MODE/ ”Buon
B2: “▼” Buon
B3: “RESET” Buon
B4: “▲” Buon
B5: “WAVE/ ” Buon
Part C-Structure
C1: Hanging Hole
C2: Baery Door
C3: Stand
1
VISO10 User Manual
1. Features
- Easy to Read and Understand Time display
- Perpetual Calendar Up to Year 2099
- Day of week & Month in 8 languages user
selectable
2. Unit Appearance
5. Lock buttons
● Hold “▼” (B2) and “▲” (B4) buon at the same me for
5 seconds to lock the rest buons. When rest buons’
funcons been locked, icon “ ” displayed. Hold “▼”
(B2) and “▲” (B4) buon 5 seconds again to unlock.
6. Precauons
7. Express Warranty (Australia)
This Express Warranty is provided by Oricom Internaonal Pty
Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South
Windsor NSW 2756, herein aer referred to as “Oricom”.
Oricom products come with guarantees that cannot be exclud-
ed under the Australian Consumer Law. You are entled to a
replacement or refund for a major failure and compensaon
for any other reasonably foreseeable loss or damage. You are
also entled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Oricom warrants that the product is free from defects in
materials or workmanship during the Express Warranty
Period. This Express Warranty does not extend to any product
from which the serial number has been removed or was
purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or
modifies any condion, warranty, guarantee, implied term,
right or remedy pursuant to the Australian Consumer Law and
which may not be so excluded, restricted or modified. For such
condions, terms, guarantees and warranes that cannot be
excluded, restricted or modified, Oricom limits the remedies
available to extent permied in the relevant legislaon.
The Express Warranty Period will be 2 years from the date of
purchase of the product evidenced by your dated sales
receipt. You are required to provide proof of purchase as a
condion of receiving Express Warranty services.
You are entled to a replacement product or repair of the
product at our discreon according to the terms and
condions of this document if your product is found to be
faulty within the Express Warranty Period. This Express
Warranty extends to the original purchaser only and is not
transferable.
Products distributed by Oricom are manufactured using new
materials or new and used materials equivalent to new in
performance and reliability. Spare parts may be new or equiva-
lent to new. Spare parts are warranted to be free from defects
in material or workmanship for thirty (30) days or for the
remainder of the Express Warranty Period of the Oricom
branded product in which they are installed, whichever is
longer. During the Express Warranty Period, Oricom will where
possible repair and if not replace the faulty product or part
thereof. All component parts removed under this Express
Warranty become the property of Oricom. In the unlikely
event that your Oricom product has a recurring failure, Oricom
may always, subject to the Compeon and Consumer Act
2010, at its discreon, elect to provide you with a replacement
product of its choosing that is at least equivalent to your
product in performance.
No change to the condions of this Express Warranty is valid
unless it is made in wring and signed by an authorised
representave of Oricom.
Oricom will not be liable under this Express Warranty, and to
the extent permied by law will not be liable for any defect,
loss, damage or injury arising out of or in connecon with a:
3. Getng started:
● Open the battery Cover (C2).
● Insert 2 x AA size alkaline batteries observing polarity [“+”
and “–“marks]. There is “click” sound when insert batteries
to remind user the batteries was inserted correctly.
● Replace the battery compartment cover.
● Place the unit onto flat surface; the unit is ready for
use now.
4. Time Setng
4.1 Manual Time Setng:
● In me display, hold “MODE/ ” buon (B1) for 3
seconds to enter Clock/Calendar seng Mode.
● The seng sequence is shown as follow:, Weekday & Month
Language, 12/24 Hr, RCC (Radio Clock) ON/OFF, Time Zone,
Hour, Minute, Year, Month, Day, DST.
● There are 8 languages, English, German, French, Spanish,
Italian, Dutch, Polish and Swedish, for day-of-week & Month.
● Press “▼” (B2) or “▲” (B4) buon to adjust the seng and
press “MODE” buon (B1) to confirm each seng.
● (By keeping the “▼” (B2) or “▲” (B4) buon pressed, could
accelerate the process and reach the desired value more
quickly)
To do this:
1) In me display, hold “MODE/ ” Buon (B1) for
3 seconds to enter Clock/Calendar seng Mode.
2) Press “▼” (B2) or “▲” (B4) buon to navigate to the
RCC (Radio Clock) ON/OFF seng.
3) Ensure that RCC is set to RCC OFF inside of Australia.
4) Confirm the selecon by clicking the “MODE/ ”
Buon (B1).
4.2 Radio Controlled Time:
● The Radio Controlled Time seng on the VISO10 will not
work in Australia. Ensure this is turned off in the sengs.
● The clock loses its me informaon when the baery is
removed.
● Use a pin to press the reset buon if the Unit does not
work properly.
● Do not expose it to direct sunlight, heavy heat, cold, high
humidity or wet areas.
● Never clean the device using abrasive or corrosive materials
or products. Abrasive cleaning agents may scratch plasc
parts and corrode electronic circuits.
1. Failure by you to adhere to the warnings and follow the
instrucons set out in this user guide for the proper
installaon and use of the product;
2. Wilful misconduct or deliberate misuse by you of the
product;
3. Any external cause beyond our control, including but not
limited to power failure, lightning or over voltage; or
4. Modificaon to the product or services carried out on the
product by anyone other than Oricom or Oricom’s autho-
rised service provider.