TFT controls / menu operation
Auto adjust [short cut]
OSD
[in orange]
TFT control buttons are located under the head unit.
The first 3 control the while
the larger button to the right powers the TFT on and off.
To adjust the TFT settings, press the button
to bring up the . Use the buttons
to navigate through the 10 menu categories. Press the
button then where appropriate
use the and to increase or decrease the value as
desired. Press the button again to confirm the setting
then repeat the process until you have made all the
required adjustments. To
on-screen display (OSD)
menu/set
( ) OSD and
to select a category
exit, simply locate the EXIT
category and press the button, or after 10 seconds
of inactivity the OSD will exit automatically.
With the screen on, press and hold down the power
button ( ) for 5 seconds to engage the auto-adjust
function without having to access the OSD menu.
The guide below shows the quickest route
and the adjustment sequence for each of
the OSD menu items (all assume you are not currently
in the menu, with the exception of EXIT).
[in grey]
1
Contrast.
Brightness.
Language
4
2
Phase.
5
V position.
4
H position.
Clock.
3
Exit.
Auto-adjust.
3
Factory reset.
2
MENU/
SELECT
VALUE
DOWN/UP
TFT POWER
ON/OFF
5
