
Quick Installation Guide
Version 1.0
Quick Installation Guide
Introduction
PRINTED ON RECYCLED PAPER
Q I G PCard-E 021L-D5 Seriesx 1907-2-29-PCAREX021LD5-1.0
The 2 Ports PCI Express Cards are designed for POS, ATM and KIOSK
applications. Each card supports 50~921600 baudrate. The PCard-E1021L-
S-D5, PCard-E2021L-S-D5, PCard-E3021L-S-D5 are for 6KV surge protect
models. In addition, the andPCard-E 021L-S-D5 PCard-E 021L-D5 seriesx x
provide full modem control signals to ensure compatibility with a wide range
of serial peripherals.
Preparation
Before you begin installing the switch, make sure you have all of the package
contents available and a PC with Microsoft Internet Explorer 6.0 or later, for
using web-based system management tools.
Elevated Operating Ambient: If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow: Installation of the equipment in a rack should be such
that the amount of air flow required for safe operation of the equipment is
not compromised.
Mechanical Loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven mechanical
loading.
Circuit Overloading: Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing
this concern.
Safety & Warnings
Dimension
Panel Layouts
DB25 Serial Port
Package Contents
Contents
QIG
PCard-E1021L-D5 or
PCard-E2021L-D5 or
PCard-E3021L-D5 or
PCard-E1021L-S-D5 or
PCard-E2021L-S-D5 or
PCard-E3021L-S-D5
Pictures Number
X 1
X 1
Front View
I N D U S T R I A L
P C I
C A R D
Industrial 2-Ports PCI Express Card
The shipped with the following items. If any of these items isdevice is
missing or damaged, please contact your customer service representative
for assistance.
PCard-E 021L-D5 Seriesx
Standard profile bracket X 1
PCB
Cable Order Information (Optional)
Model Name
9_CYASWL0008_XXB0
9_CYASWL0011_XXB0
Pictures Description
DB9 Male to DB9 Female, 150cm
DB25 Male to DB9 MaleX2, 50cm
DB25 Serial Port
DIP Switch Definition for RS485
PIN1/PIN2 Pull Hi/Lo
PIN3 Terminator
For PCard-E1021L-S-D5 / PCard-E1021L-D5
The DB25 connector supports RS232 / RS422 / RS485
operation modes. Please refer to the following table for
the pin assignments of the DB25 connector.
PIN RS232 RS422 4W-RS485 2W-RS485
1 DCD -- -- --
2 RXD -- -- --
3 TXD -- -- --
4 DTR -- -- --
5 GND -- -- --
6 DSR -- -- --
7 RTS -- -- --
8 CTS -- -- --
-- -- -- -- --
For PCard-E2021L-S-D5 / PCard-E2021L-D5
PIN RS232 RS422 4W-RS485 2W-RS485
1 -- TX- TX- --
2 -- TX+ TX+ --
3 -- RX+ RX+ D+
4 -- RX- RX- D-
5 -- GND GND GND
6 -- -- -- --
7 -- -- -- --
8 -- -- -- --
-- -- -- -- --
DIP Switch Definition for RS485
PIN1/PIN2 Pull Hi/Lo
PIN3 Terminator
For PCard-E3021L-S-D5 / PCard-E3021L-D5
PIN RS232 RS422 4W-RS485 2W-RS485
1 DCD TX- TX- --
2 RXD TX+ TX+ --
3 TXD RX+ RX+ D+
4 DTR RX- RX- D-
5 GND GND GND GND
6 DSR -- -- --
7 RTS -- -- --
8 CTS -- -- --
-- -- -- -- --
13 1
25 14
DB25 Female connector