Orion OLS-4601KPTGP User manual

OLS-4601KPTGP
1 of 28
Ver. 1.0 E
OLS-4601KPTGP
User’s Guide

OLS-4601KPTGP
2 of 28
CONTENTS
ZSafety Instructions ------------------------------------------------------------------- 3-7.
ZIntroduction -------------------------------------------------------------------------- 8-10.
ZRemote control ------------------------------------------------------------------------ 11.
ZViewing the Menus ---------------------------------------------------------------- 12-26.
ZSpecifications -------------------------------------------------------------------------- 27.
ZEWF -------------------------------------------------------------------------------------- 28.

OLS-4601KPTGP
3 of 28
Safety Instructions
¾Do not use a damaged or loose plug.
yThis may cause electric shock or fire.
¾Do not pull the plug out by the wire nor touch the plug with wet hands.
yThis may cause electric shock or fire.
¾Use only a properly grounded plug and receptacle.
yAn improper ground may cause electric shock or equipment damage.
¾Insert the power plug firmly so that it does not come loose.
yA bad connection may cause fire.
¾Do not excessively bend the plug and wire nor place heavy objects
upon them, which could cause damage.
yThis may cause electric shock or fire.
¾Do not connect too many extension cords or plugs to one outlet.
yThis may cause fire.

OLS-4601KPTGP
4 of 28
¾Do not disconnect the power cord while using the LCD Display.
yA surge may be caused by the separation and may damage the
LCD Display.
¾Do not use the power cord when the connector or plug is dusty.
yIf the connector or plug of the power cord is dusty,
clean it with a dry cloth.
yUsing the power cord with a dusty plug or connector may cause
electric shock or fire.
¾Do not drop the LCD Display when moving it.
yThis may cause damage to the product or the person carrying it.
¾Keep any flammable objects such as candles, insecticides or
cigarettes away from the product.
yOtherwise, this may cause fire.
¾Keep any heating devices away from the power cable.
yA melted coating may cause electric shock or fire.
¾Put down the LCD Display carefully.
yFailing to do so may damage the LCD Display.

OLS-4601KPTGP
5 of 28
¾Do not place the LCD Display face down.
yThis may damage the TFT-LCD surface.
¾The installation of the bracket must be done by a qualified
professional.
yInstalling the bracket by unqualified personnel may result in injury.
yAlways use the mounting device specified in the owner's manual.
¾When installing the product, make sure to keep it away from the wall
(more than 10 cm / 4 inches) for ventilation purposes.
yPoor ventilation may cause an increase in the internal temperature
of the product, resulting in a shortened component life and degraded
performance.
¾Do not spray water or detergent directly onto the LCD Display.
yThis may cause damage, electric shock or fire.
.
¾Keep the product away from places exposed to oil, smoke or
moisture; do not install inside a vehicle.
yThis may cause a malfunction, electric shock or fire.
yIn particular, avoid operating the LCD Display near water or outdoors
Where the LCD Display could be exposed to snow or rain.
¾Disconnect the plug from the outlet during storms or lightning or if
it is not used for a long period of time.
yFailure to do so may cause electric shock or fire.