Ortega SEA DEVIL User manual

Features & Functions
Caution
APPEARANCE AND SKETCH
1.To avoid short circuit electric shock or malfunction ：
Do not disassemble for repair.
Do not place in high temperature and humid space such as electric
heater,direct sunlight,bathroom,wet floor etc.
Do not place in excessive vibration.
Do not place in dusty or dirty space.
Do not operate the tuner with wet hands.
2.To avoid breakdown
Do not handle all controls with excessive power.
Do not drop the tuner.
3.Cleaning
Do not use thinner or alcohol for cleaning.
Use only dry and clean cloth.
4.Power supply
Use only 9V ：6F22/DC adapter
1) FOOT switch
Pressing this switch will turn the tuner on/off.
2) INPUT jack
Connect the output cord of the instrument to the input jack of tuner.When a
battery is uesd ,the input jack also functions as a power switch.When a plug is
inserted into the input jack,the power will be turned on .When the plug is
pulled out ,the power will be turned off.When you are not using the tuner,pull
the plug out of the input jack.
3) DC 9V in jack
If a DV adapter is used,you will be able to play for extended periods without
worrying about battery life.
4) OUTPUT jack
Connect your Amp or another effect unit to this jack.
When the tuner is off,this will output the signal of the instrument connected to
the input jack.
When the tuner is on,no sound will be ouput from this jack so use this jack if
you wish to tune silently.
INPUT
DC9V
OUTPUT
Note display
PITCH FLAT
①
②
③
④
⑤
⑥⑦
⑧
www.ortegaguitars.com
SEA DEVIL | CHROMATIC TUNER USER‘S MANUAL
Note accuracy
indication
USB DOCK
*Imorptant notice:
Manufacturers and sellers are not responsible for misuse, damages and negligence in use of this product.

Procedure
Tuning Range ：A0(27.5Hz)-C8(4,186Hz)
Accuracy ：+/- 1cent
Calibration ：436-445Hz (1 Hz step)
Flat ：b,bb,bbb
Note ：A,A#,B,C,C#,D,D#,E,F,F#,G,G#
Indicator：39seg FND &1LED
Input ：1/4” Input jack
Output ：1/4” Output jack, 1/4” Bypass jack
Power ：9V（6F22，DC adapter）
Dimensions ：73（W）*110（D）*47（H）mm
Weight ：300g（including battery）
Installation & activation of the included LED light
Insert
Specifications
Connect s
PITCH button
This button lets you change the reference frequency.7-segment indication of 0~5
means 440~445Hz,and indication of 6~9 means 436~439Hz.
FLAT button
This button lets you use flat tunings.
8) OPERATION light
1. Connect output of the instrument to the INPUT jack of tuner,the power
will be turned on.
2. Press the Foot Switch to turn the tuner on .
3. Press the PITCH button to select the reference frequency you want to
use.
4. Press the FLAT button to select the reference flat you want to use.
5. Adjust the instrument until the tuning note you wisd to tune is indicated
on FND Tuning Note.
6. Adjust the instrument slowly until to approach the FND Tuning Guide to
the center position.
7. When the center of FND Tuning Guide lights up,this point is exact
sound of the instrument.
b
=b =b b =bb
www.ortegaguitars.com
USB
3.The LED lights will turn on automatically. Disconnect the USB plug to
turn the lights off.
.