OSALIS WaxBath PRO THERAPY User manual

WaxBath™
Pro Therapy
Heated Paran Wax Bath
User Manual
Please ensure you read this user manual thoroughly before use.
Important Safety
Information
• Do not place the WaxBath™ into any liquid.
• Do not operate the device if it has a damaged cord or plug, is
not working properly, or has been dropped or damaged in any
manner.
• Always use the WaxBath™ on a level surface where it cannot fall.
• Unplug the device when it’s not in use. Allow to cool before
handling and cleaning the unit.
• Always test the temperature of the wax before submerging any
body part into the unit.
• Use the WaxBath™ only for its intended use as described in this
user manual. The manufacturer is not liable for damage resulting
from improper or careless use.
• Do not allow children to play with this device.
• Do not attempt to repair or modify this device as your guarantee
will be invalidated.
• If you are pregnant or suer from health problems, please
consult your doctor before using the device. Do not use this
device if you have heart disease, ushed skin, inammations,
swelling, sensitive areas, diabetes, open wounds, burns, eczema,
psoriasis or reduced sensitivity to pain or heat.
• Do not operate your WaxBath™ without paran wax.
• Remove jewellery from your hands and feet before use.
• If pain, irritations, dermatitis or discomfort occurs, stop treatment
and consult your doctor.
• Do not use paran wax on open cuts.
WaxBathtm Paraffin
Wa x M e lts
4 5
Contact us
Our friendly team of UK based
advisors are there to help you
Any questions, just email
[e-mail] or call
[phone] Mon - Fri 8am - 4pm
• Safe for even sensitive skin
• Low melting temperature
• Reusable
• Food-grade
Save when you buy more!
Buy now from
www.stressnomore.co.uk
Max capacity: 5000ml
Voltage: USA: 110-120V; EU: 220-240V
Power: 230W
Temperature range: 30°C - 85°C
Specications

Welcome
Thank you for choosing WaxBath™.
Your WaxBath™ ProTherapy Heated Paran Wax Bath provides a variety of
health and wellbeing benets, including:
• Salon-quality therapy for dry, rough and stressed skin
• Protection for damaged skin, such as eczema
• Promoting the absorption of essential nutrients to maintain youthful
skin
• Alleviating aches and pains by stimulating blood ow and improving
circulation. Ideal for arthiritis suerers and sti muscles.
C: Temperature (45°C - 95°C)
H: Time (1 - 99 minutes)
Increase the temperature/treatment time
Decrease the temperature/treatment time
Set the temperature/treatment time
Standby
SET
ON
OFF
How to Use your
WaxBathtm
1. Remove your WaxBath™ from its packaging, insert the power cable
and plug into a plug socket. A ‘beep’ will sound when your WaxBath™
has power.
2. Remove the lid and pour in your desired amount of WaxBath™ Paran
Wax Melts. Replace the lid to contain the heat and help your wax melt
faster.
3. Push the standby button once to turn on your WaxBath™.
4. Your WaxBath™ will start at 50°C (C50). Adjust the temperature and
treatment time to melt your desired quantity of wax.
How to Clean your
WaxBathtm
1. Once the wax has solidied, turn your WaxBath™ back on for a couple
of minutes to melt a thin layer of the wax block. This makes it easier
to slide the block out of the bath. Make sure you have turned your
WaxBath™ o before moving it.
2. If required, you can carefully chop your block of paran wax for
easier storage.
3. Once your WaxBath™ has fully cooled, remove any remaining wax
using a clean damp cloth.
4. Replace the lid and store your WaxBath™ with its power cable ready
for your next use.
Top tip: Slide your solid wax out onto a chopping board and cut up
for easier storage. Your paran wax can be reused and can last for
over 2 years if looked after.
Where can I Use Wax
Therapy?
Paran wax therapy works on two levels; moisturising and softening the
skin, whilst warming deeply to improve blood circulation and reduce joint
pain. It can be especially benecial for suerers of arthritis pains and sti
muscles.
Treat yourself to wax therapy as often as you like!
• Feet
• Hands
• Arms
• Elbows and knees
1 2 3
5. Once your wax has melted, allow it to cool to a comfortable
temperature of 50°C (C50) before use. Use this time to clean and dry
your therapy area.
6. Once the LED screen reads C50, test the temperature of the wax
cautiously using your elbow, followed by the inside of your wrist. Alter
the temperature using + and – as needed.
7. Dip your chosen therapy area into the wax, then fully remove and
allow to air dry. Dip again to build a second layer of wax. Repeat until
you have 4-5 layers of wax built up.
8. Once the top layer of wax has dried, cover the therapy area with a
towel and relax whilst the heat from the wax soothes the area.
9. After 20-30 minutes, gently peel the wax o and massage moisturisers
or body oils into the therapy area.
10.Repeat for all therapy areas.
11. To turn o the device, rst put it in standby mode by pressing the
standby button once. Then unplug from the power source, clean, and
store.
Amount of WaxBath™
Paran Wax Melts
Melting Temperature (C) Time to Melt (H)
(approx.)
MINIMUM
1 bag (500g)
50°C 45 minutes
2 bags (1,000g) 85°C 60 minutes
3 bags (1,500g) 85°C 60 - 80 minutes
MAXIMUM
4 bags (2,000g)
85°C 60 - 80 minutes
About your WaxBathtm