NRS Healthcare Stanton Raised Toilet Seat Series User manual

General Safety Warning
Please ensure these instructions are fully read and
understood before installation/ use. Retain these
instructions in a safe place for future reference.
4.0 Fitting Instructions
4.1 Bracket Assembly
1. Assemble the side brackets; clip the screw
(with knob) into “L” shaped bracket as shown in
fig 1.
Fig 2
M11120 - 2" (50mm) Stanton Raised Toilet Seat with Lid
M11132 - 4" (100mm) Stanton Raised Toilet Seat with Lid
N05266 - 6" (150mm) Stanton Raised Toilet Seat
N05289 - 6" (150mm) Stanton Raised Toilet Seat with Lid
Fig 1
Screw
“L” Bracket
User Instructions
Stanton Raised Toilet Seat Range
1.0 Intended Use
The Stanton Raised Toilet Seat is designed to fit
a standard toilet bowl and provide a secure
raised toilet seat surface for those with reduced
mobility.
2.0 Safety Precautions
Do not exceed the maximum user weight
limit of 30st (190kg)
Inspect the Toilet Seat regularly to ensure it
is fitted correctly, is safe and secure, and fit
for use. If in any doubt, contact a competent
installer of sanitary equipment.
Inspect at regular intervals for wear and
damage.
Any undue signs of damage should be noted
and reported to the supplier in the first
instance. Should damage be evident, then
the user should refrain from using the
product until advice has been sought from
the supplier.
3.0 Unpacking
Check all parts carefully before assembling the
product. Do not assemble if any of the parts are
damaged. Do not assemble if any of the
contents are missing.
Contents
Raised Toilet Seat
2 Part Side Brackets (x2)
2. Slot the bracket into threaded slots in
underside of seat as shown in fig 2 and screw
until the thread is fully engaged.
Maximum
User
Weight:
30st
190kg

6.0 Cleaning Instructions
Clean regularly, use a general purpose,
neutral detergent and warm water
Please check the suitability of the product
before use. Do not use abrasive cleaners or
cloths as this will permanently damage the
surface and invalidate any warranty.
Do not use any form of solvent as this will
damage the surface and weaken the product
and again invalidate any warranty.
To disinfect, wipe with a dilute bleach
solution, and rinse thoroughly with fresh
water
These seats may be autoclaved on cleaning
cycles up to 73°C
Dry the seat thoroughly before use.
7.0 Disposal Instructions
Appropriate hygiene standards should be
applied before disposal to reduce the risk of
infection.
Materials used are essentially non hazardous
and can be disposed of appropriately.
8.0 Product Guarantee
NRS Healthcare, guarantee this product for a
period of 12 months from the date of purchase
against faulty materials and workmanship. This
guarantee does not cover, abuse, misuse,
interference or tampering with any part of the
product.
Any guarantee issued by NRS Healthcare does
not affect your statutory rights.
9.0 Contact Details
NRS Healthcare,
Sherwood House, Cartwright Way,
Forest Business Park, Bardon Hill,
Coalville, Leicestershire,
LE67 1UB
United Kingdom.
Tel. Head Office: 0330 100 0098
Tel. Customer Services: 0345 121 8111
Email: [email protected]
UI/M11120/M11132/N05266/N05289/05/17/Iss7
5.0 Correct Use
We recommend that you regularly check
the seat, ensuring that the screws are tight
and the seat remains evenly positioned on
the bowl.
If you suspect that the seat has moved out
of position, please follow the instructions
above to move it back into the correct
position and retighten all fixings.
Do not under any circumstances stand on
the seat or allow others to do so as this is
highly dangerous and will compromise the
safety of the user.
If you have to remove the Raised Toilet
Seat for any reason, please ensure that you
follow the installation instructions again fully
before using. Failure to do so could
compromise the safety of the user.
4.2 Fitting to the Toilet
1. Check the toilet is safe and secure before
attempting to fit the product
2. Lift up the existing toilet seat.
3. Take the raised toilet seat, check the two
side brackets are screwed out an equal
amount and there is enough clearance to fit
over the toilet bowl.
4. Place on the toilet, ensure the front lip is
outside of the bowl and the seat is evenly
positioned about the bowl (see main picture)
5. Secure in place by turning the screws
anti-clockwise. Assembly tip: To ensure
the toilet seat is positioned correctly
tighten both side brackets
simultaneously by turning both screws,
an equal amount, until the seat is secure.
6. Before use check the seat is secure by
applying reasonable force, front to back and
side to side, if there is any movement re-
tighten the screws.
7. To remove the seat, simply unscrew the side
brackets an equal amount and lift clear.
NRS Healthcare is a Leading Supplier of Community Equipment and
Daily Living Aids, to view our full range, visit our website:
www.nrshealthcare.co.uk