OSP Designs ORION BOOKCASE ORN27BK User manual

ORN27BK
ORION BOOKCASE
OPERATING INSTRUCTIONS
LIMITED WarranTy
OSP Designs Warrants, to the original purchaser its products to be free from defects in material and workmanship for a period of 90 days. Defects
and damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of OSP
Designs is not covered. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state.
To make a warranty claim, contact Customer Service, provide model number, sales receipt and description of the problem. It is the customer’s
responsibility to prepay freight on any components returned to the factory. OSP Designs will pay return freight on components covered under
terms of warranty.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when hardware is missing.
Our Parts Department will do everything possible to promptly remedy the problem. Contact us via email parts@officestar.net, by Fax
1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. OSP Designs P.O. Box
3520 Ontario, California 91761 USA
WarnInG
1. Do not use this product unless all screws and bolts are securely
tightened.
2. Check that all screws and bolts are tight every three months or as
needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use this product as a stepladder.
5. Use this product for its intended purpose only.
6. Intended for residential use only

IMPORTANT NOTE:
1. Use hand tools only for assembly as power tools may cause damage
2. Carefully remove any staples used for packaging.
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Secure Upper Cross Bar (2) and Lower Cross Bar (3) between Side Frames (1L & 1R) using two Long Machine Screws (9) for each cross bar.
DO NOT FULLY TIGHTEN SCREWS.
PART QTY
1. Side Frame (1L & 1R) ..........2
2. Upper Cross Bar ..............1
3. Lower Cross Bar ..............1
4. Top ........................1
5. Middle Shelf ..................1
6. Bottom Shelf .................1
7. Cross Bar ....................2
8. Short Machine Screw ..........2
9. Long Machine Screw ...........4
10. Short Wood Screw ............7
11. Long Wood Screw ............8
12. Allen Wrench (not shown) ......1
ORN27BK
ORION BOOKCASE
ASSEMBLY INSTRUCTIONS
ORN27BK
ORION BOOKCASE
ASSEMBLY INSTRUCTIONS
STEP 2 Secure Top (4), Middle Shelf (5) and Bottom Shelf (6) between Side Frames (1L & 1R) using five Long Wood Screws (11) for each Side Frame (1) .
DO NOT FULLY TIGHTEN SCREWS. Secure Middle Shelf (5) to Upper Cross Bar (2) using three Short Wood Screws (10), secure Bottom Shelf (6) to
Lower Cross Bar (3) using two Short Wood Screws (10). APPLY FIRM PRESSURE TO ALIGN AND FULLY TIGHTEN ALL SCREWS.
STEP 3 Secure both Cross Bars (7) to rear of assembly using two Short Machine Screws (8) for top of assembly and two Short Wood Screws (10) for bottom
of assembly. FULLY TIGHTEN ALL SCREWS.
IMPORTANT NOTE: PLEASE MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING BOOKCASE.
STEP 1
STEP 2
STEP 3
1L
1L
1R
1R
4
5
6
2
3
9
10
10
11
11
8
10
7
© Office Star Products April 2012