OSP furniture ASCEND ll ACT1010 User manual

ASCEND ll
ACT1010 / ACT1011
ACTIVE PERCH STOOL
WARRANTY & WARNING
OSP FURNITURE LIMITED PRODUCT WARRANTY
ASCEND II
Active seating and tables are warranted from the date of purchase as follows:
• 3 Years against failure due to materials and workmanship
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of Office Star Products.The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty
on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax [phone], or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
WARNING
1. Use this product only one person at a time.
2. Do not use this stool unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Move & carry stool as instructed.
5. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
6. Do not use stool as a stepladder.
7. Use this stool for its intended purpose only.
8. Use mild detergent only for cleaning.
• OUTTASIGHT SEAT HEIGHT ADJUSTMENT
See page 3 for operating instructions.
NOTE: It is normal for chair to slightly lower under body weight.
FEATURES

© Office Star Products January 2019
ASCEND ll
ACT1010 / ACT1011
ACTIVE PERCH STOOL
ASSEMBLY INSTRUCTIONS
PARTS LIST
(1) Seat (1Piece) (2) Bellows (1Piece) (4) Base (1Piece)(3) Pneumatic Cylinder (1Piece)
PARTS LIST
(1) Seat (1Piece) (2) Bellows (1Piece) (4) Base (1Piece)(3) Pneumatic Cylinder (1Piece)
PARTS LIST
(1) Seat (1Piece) (2) Bellows (1Piece) (4) Base (1Piece)(3) Pneumatic Cylinder (1Piece)
PARTS LIST
(1) Seat (1Piece) (2) Bellows (1Piece) (4) Base (1Piece)(3) Pneumatic Cylinder (1Piece)
PARTS LIST
(1) Seat (1Piece) (2) Bellows (1Piece) (4) Base (1Piece)(3) Pneumatic Cylinder (1Piece)
STEP 1 STEP 2
STEP 3 STEP 4
3
3
4
4
2
2
1
1
NOTE: Remove black & white plastic protective caps
from Pneumatic Cylinder (3).

ASCEND ll
ACT1010 / ACT1011
ACTIVE PERCH STOOL
OPERATING INSTRUCTIONS
OUTTASIGHT easy-adjust mechanism
• Adjusts from any position
• Adjust whether seated or standing
• OUTTASIGHT for clean, contemparary
appearance

ASCEND ll
ACT1010 / ACT1011
ACTIVE PERCH STOOL
OPERATING INSTRUCTIONS
PROPER USAGE
DO NOT REST FEET ON BASE. USE A THREE-POINT SITTING
POSITION WITH TWO FEET ON FLOOR. TIGHTEN CORE MUSCLES.
ALWAYS CARRY STOOL WITH TWO HANDS.